journal article·2016-09

On-Site Energy Consumption and Selected Emissions at Softwood Sawmills in the Southwestern United States

Dan Loeffler, Nathaniel Anderson, Todd A. Morgan, Colin B. Sorenson

Forest Products Journal· Volume 66· Issue 5-6
Publisher page

Abstract

Abstract Presently there is a lack of information describing US southwestern energy consumption and emissions generated from the sawmilling industry. This article uses a mail survey of softwood sawmills in the states of Arizona, Colorado, and New Mexico to develop a profile of on-site energy consumption and selected emissions for the industry. Energy consumption is categorized by fuel type on a production basis for both renewable and nonrenewable sources for production year 2012. Selected emissions from on-site energy consumption were also estimated for respondent sawmills. Survey respondents represented 35 percent of total softwood lumber production of 169.2 million board feet. Total annual on-site sawmill energy required was 64.8 billion British thermal units. Sixty-one percent was derived from diesel fuel, primarily for on-site rolling stock; 35 percent was from electricity; 3 percent was from gasoline used for on-site rolling stock; and the remainder was from propane and wood. Energy produced from nonrenewable sources accounted for 94 percent of total on-site energy consumption. Off-site electricity generation for consumption at sawmills comprise the majority of all emissions in this analysis: 62 percent of CO2, 99 percent of CH4, 94 percent of NOX, 99 percent of SOX, and 99 percent of particulate matter ≤ 10 μm (PM10). Diesel fuel, which supplies the majority of on-site energy, comprises 36 percent CO2, 0 percent CH4, 5 percent NOX, 0.4 percent SOX, and 1.1 percent of PM10.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Forest Biomass Utilization and Management · Forest Management and Policy · Environmental Impact and Sustainability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. American Wood Council (AWC). 2013. North American softwood lumber. http://www.awc.org/pdf/EPDs/Softwood_Lumber_EPD.pdf. Accessed September 30, 2015.
2. Bergman, R. and S. Bowe. 2012. Life-cycle inventory of manufacturing hardwood lumber in southeastern U.S. Wood Fiber Sci. 44(1):71–84.
3. Bergman, R. D. and S. A. Bowe. 2008. Environmental impact of producing hardwood lumber using life-cycle inventory. Wood Fiber Sci. 40(3):448–458.
4. Bergman, R. D. and S. A. Bowe. 2010. Environmental impact of manufacturing softwood lumber in northeastern and north central United States. Wood Fiber Sci. 42(CORRIM special issue):67–78.
5. Bond, B. 2008. Sawmill and treating insights: Rein in escalating energy costs. http://www.palletenterprise.com/articledatabase/view.asp?articleID=2648. Accessed August 14, 2015.
6. Bowyer, J. L., R. Shmulsky, and J. G. Haygreen. 2007. Forest Products and Wood Science: An Introduction. Blackwell, Ames, Iowa. 558pp.
7. Bureau of Business and Economic Research (BBER). 2015. Logging utilization studies. Unpublished raw data. University of Montana, Missoula.
8. Bureau of Labor Statistics (BLS). 2015. Quarterly census of employment and wages. http://www.bls.gov/cew/data.htm. Accessed November 25, 2014.
9. Callendar, G. S. 1949. Can carbon dioxide influence climate?Weather4(10):310–314.
10. Cherubini, F., G. Peters, T. Berntsen, A. Stromman, and E. Hertwich. 2011. CO2 emissions from biomass combustion for bioenergy: Atmospheric decay and contribution to global warming. Glob. Change Biol. Bioenergy3(5):413–426.
11. Consortium for Research on Renewable Industrial Materials (CORRIM). 2001. Research Guidelines for Life-Cycle Inventories. University of Washington, Seattle. 47pp.
12. Database of State Incentives for Renewables & Efficiency (DSIRE). 2016. http://www.dsireusa.org. Accessed August 20, 2015.
13. Forest Products Laboratory (FPL). 1999. Air drying of lumber. General Technical Report FPL-GTR-117. USDA Forest Service, Forest Products Laboratory, Madison, Wisconsin. 62pp.
14. Groves, R. M. 2006. Nonresponse rates and nonresponse bias in household surveys. Pub. Opin. Q. 70(5):646–675.
15. Groves, R. M. and E. Peytcheva. 2008. The impact of nonresponse rates on nonresponse bias: A meta analysis. Pub. Opin. Q. 72(2):167–189.
16. Hardy, C. C., R. D. Ottmar, J. L. Peterson, J. E. Core, and P. Seamon (Eds.). 2001. Smoke management guide for prescribed and wildland fire. 2001 ed.National Wildfire Coordinating Group. 223pp.
17. Hayes, S. W., T. A. Morgan, E. C. Berg, J. M. Daniels, and M. T. Thompson. 2012. The Four Corners timber harvest and forest products industry, 2007. Resource Bulletin RMRS-RB-13. USDA Forest Service, Rocky Mountain Research Station, Fort Collins, Colorado. 61pp.
18. Howard, J. L. and R. MWestby. 2013. U.S. timber production, trade, consumption and price statistics 1965–2011. Research Paper FPL-RP-676. USDA Forest Service, Forest Products Laboratory, Madison, Wisconsin.99pp.
19. Jenkins, B. M., L. L. Baxter, T. R. Miles, Jr., and T. R. Miles. 1998. Combustion properties of biomass. Fuel Proc. Technol. 54:17–46.
20. Jones, G., D. Loeffler, D. Calkin, and W. Chung. 2010. Forest treatment residues for thermal energy compared with disposal by onsite burning: Emissions and energy return. Biomass Bioenergy34(5):737–746.
21. Lippke, B., R. Gustafson, R. Venditti, P. Steele, T. A. Volk, E. Oneil, L. Johnson, M. E. Puettmann, and K. Skog. 2012. Comparing life-cycle carbon and energy impacts for biofuel, wood product, and forest management. Forest Prod. J. 62(4):247–257.
22. Loeffler, D. and N. Anderson. 2014. Emissions tradeoffs associated with co-firing forest biomass with coal: A case study in Colorado, USA. Appl. Energy113:67–77.
23. Loeffler, D., N. Anderson, T. A. Morgan, and C. B. Sorenson. 2016. On-site energy consumption at softwood sawmills in Montana. Forest Prod. J. 66(3/4):155–163.
24. Loeffler, D., J. Brandt, T. Morgan, and G. Jones. 2010. Forestry-based biomass economic and financial information and tools: An annotated bibliography. General Technical Report RMRS-GTR-244WWW. USDA Forest Service, Rocky Mountain Research Station, Fort Collins, Colorado. 52pp.
25. Milota, M. R., C. D. West, and I. D. Hartley. 2005. Gate-to-gate life-cycle inventory of softwood lumber production. Wood Fiber Sci. 37(CORRIM special issue):47–57.
26. Miner, R. A., R. C. Abt, J. L. Bowyer, M. A. Buford, R. W. Malmsheimer, J. O'Laughlin, E. E. Oneil, R. A. Sedjo, and K. W. Skog. 2014. Forest carbon accounting considerations in US bioenergy policy. J. Forestry112(6):591–606.
27. Morgan, T. A., J. P. Brandt, J. D. Baldridge, and D. R. Loeffler. 2011. Use of financial and economic analyses by federal forest managers for woody biomass removal. West. J. Appl. Forestry26(1):5–12.
28. Morgan, T. A., T. Dillon, C. E. Keegan, A. L. Chase, and M. T. Thompson. 2006. The Four Corners timber harvest and forest products industry, 2002. Research Bulletin RMRS-RB-7. USDA Forest Service, Rocky Mountain Research Station, Fort Collins, Colorado. 63pp.
29. Morgan, T. A. and T. P. Spoelma. 2008. California logging utilization: 2004. West. J. Appl. Forestry23(1):12–18.
30. Oliver, C. D., N. T. Nassar, B. R. Lippke, and J. B. McCarter. 2014. Carbon, fossil fuel, and biodiversity mitigation with wood and forests. J. Sust. Forestry33:248–275.
31. Puettmann, M. E. and B. Lippke. 2012. Woody biomass substitution for thermal energy at softwood lumber mills in the US inland northwest. Forest Prod. J. 62(4):273–279.
32. Reynolds, R. T., A. J. Sanchez Meador, J. A. Youtz, T. Nicolet, M. S. Matonis, P. L. Jackson, D. G. DeLorenzo, and A. D. Graves. 2013. Restoring composition and structure in southwestern frequent-fire forests: A science-based framework for improving ecosystem resiliency. General Technical Report RMRS-GTR-310. USDA Forest Service, Rocky Mountain Research Station, Fort Collins, Colorado. 76pp.
33. Schulze, E., C. Korner, B. Law, H. Haberl, and S. Luyssaert. 2012. Large-scale production of bioenergy from forest biomass is neither sustainable nor greenhouse gas neutral. Glob. Change Biol. Bioenergy4:611–616.
34. Searchinger, T. 2010. Biofuels and the need for additional carbon. Environ. Res. Lett. 10 pp.
35. Setzer, T. S. and A. K. Wilson. 1970. Timber products in the Rocky Mountain States, 1966. RB-INT-9. USDA Forest Service, Intermountain Forest and Range Experiment Station, Ogden, Utah. 93pp.
36. Shelton, J. W. 1942. The Woodburners Encyclopedia: An Information Source of Theory, Practice and Equipment Relating to Wood as Energy. Vermont Crossroads, Waitsfield. 155pp.
37. Simmons, E. A., T. A. Morgan, E. C. Berg, S. J. Zarnoch, S. W. Hayes, and M. T. Thompson. 2014. Logging utilization in Idaho: Current and past trends. General Technical Report RMRS-GTR-318. USDA Forest Service, Rocky Mountain Research Station, Fort Collins, Colorado. 15pp.
38. Solomon, S., G.-K. Plattner, and P. Friedlingstein. 2009. Irreversible climate change due to carbon dioxide emissions. Proc. Natl. Acad. Sci. U. S. A. 106:1704–1709.
39. Sorenson, C. B., S. W. Hayes, T. A. Morgan, E. A. Simmons, M. G. Scudder, C. P. McIver, and M. T. Thompson. 2016. The Four Corners timber harvest and forest products industry, 2012. Resource Bulletin RMRS-RB-21. USDA Forest Service, Rocky Mountain Research Station, Fort Collins, Colorado. 62pp.
40. Spath, P. L. and M. K. Mann. 2000. Life cycle assessment of a natural gas combined-cycle power generation system. National Renewable Energy Laboratory, Golden, Colorado. 56pp.
41. Spath, P. L., M. K. Mann, and D. R. Kerr. 1999. Life cycle assessment of coal-fired power production. National Renewable Energy Laboratory, Golden, Colorado. 172pp.
42. Spelter, H., D. McKeever, and D. Toth. 2009. Profile 2009: Softwood sawmills in the United States and Canada. Research Paper FPL-RP-659. USDA Forest Service, Forest Products Laboratory, Madison, Wisconsin. 55pp.
43. Tilman, D., R. Socolow, J. A. Foley, J. Hill, E. Larson, L. Lynd, S. Pacala, J. Reilly, T. Searchinger, C. Somerville, and R. Williams. 2009. Beneficial biofuels—The food, energy, and environment trilemma. Science325:270–271.
44. US Department of Agriculture (USDA). 2013. USDA Forest Service, Forest Inventory Data Online. http://apps.fs.fed.us/fia/fido/index.html. Accessed August 10, 2015.
45. U.S. Department of Agriculture (USDA). 2015. RPA-TPO Database. http://srsfia2.fs.fed.us/php/tpo_2009/tpo_rpa_int1.php. Accessed August 19, 2015.
46. US Department of Energy (DOE). 2011. US billion-ton update: Biomass supply for a bioenergy and bioproducts industry. ORNL/TM-2011/224.R. D. Perlackand B. J. Stokes (Leads). Oak Ridge National Laboratory, Oak Ridge, Tennessee.227pp.
47. US Energy Information Administration (EIA). 2010. Manufacturing energy consumption survey. http://www.eia.gov/consumption/manufacturing/data/2010. Accessed August 20, 2015.
48. US Energy Information Administration (EIA) 2011. Annual energy review. http://www.eia.gov/totalenergy/data/annual/index.cfm. Accessed July 14, 2015.
49. US Energy Information Administration (EIA) 2012. Renewable and alternative fuels. http://www.eia.gov/renewable/data.cfm#biomass. Accessed July 14, 2015.
50. US Energy Information Administration (EIA) 2013. Manufacturing energy consumption survey. http://www.eia.gov/consumption/manufacturing/data/2010. Accessed July 14, 2015.
51. US Energy Information Administration (EIA). 2015a. State energy data system. http://www.eia.gov/state/seds. Accessed July 13, 2015.
52. US Energy Information Administration (EIA). 2015b. State electricity profiles. http://www.eia.gov/electricity/state. Accessed July 13, 2015.
53. US Energy Information Administration (EIA). 2015c. Energy explained. http://www.eia.gov/energyexplained/index.cfm?page=about_energy_units. Accessed August 14, 2015.
54. US Environmental Protection Agency (EPA). 1995. Compilation of air pollutants emission factors. Vol. 1. Stationary point and area sources. EPA, Research Triangle Park, North Carolina.
55. US Environmental Protection Agency (EPA). 2007. Energy trends in selected manufacturing sectors: Opportunities and challenges for environmentally preferable energy outcomes. ICF International, Fairfax, Virginia. 204pp.
56. Van Hooser, D. D. and D. C. Chojnacky. 1983. Whole tree volume estimates for the Rocky Mountain States. Resource Bulletin INT-29. USDA Forest Service, Intermountain Forest and Range Experiment Station, Ogden, Utah. 69pp.
57. Wengert, G. and D. Meyer. 1992. Energy at the sawmill: Conservation and cost reduction. Forest Facts. 8pp.
58. Wilson, A. K. and J. S. Spencer, Jr. 1967 . Timber resources and industries in the Rocky Mountain States. Resource Bulletin INT-7. USDA Forest Service, Intermountain Forest and Range Experiment Station, Ogden, Utah. 67pp.
59. Wilson, P. L., J. W. Funck, and R. B. Avery. 1987. Fuelwood characteristics of northwestern conifers and hardwoods. Resource Bulletin 60. Forest Research Laboratory, Oregon State University, Corvallis. 47pp.
60. Wilson, P. L., J. W. Funck, and R. B. Avery. 2010. Fuelwood characteristics of northwestern conifers and hardwoods. Updated byD. J. Parrent, J. W. Funck, J. Reeb, and A. M. Brackley (Eds.). General Technical Report PNW-GTR-810. USDA Forest Service, Pacific Northwest Research Station, Portland, Oregon.50pp.
61. Woodall, C. W., P. J. Ince, K. E. Skog, F. X. Aguilar, C. E. Keegan, C. B. Sorenson, D. G. Hodges, and W. B. Smith. 2012. An overview of the forest products sector downturn in the United States. Forest Prod. J. 61:595–603.
62. Yokelson, R. J., D. W. T. Griffith, and D. E. Ward. 1996. Open path Fourier transform infrared studies of large scale laboratory biomass fires. J. Geophys. Res. 101:21067–21080.
63. Zhou, X. 2013. Production, prices, employment, and trade in Northwest forest industries, all quarters 2012. Resource Bulletin PNW-RB-265. USDA Forest Service, Pacific Northwest Research Station, Portland, Oregon. 163pp.