Two-Line Spatial Reflection Method for Measuring Wood Grain Direction
Source abstract
Abstract
Abstract Wood grain direction is a three-dimensional quantity that is defined by its angles within and into the plane of the measured surface. These are respectively called the surface and dive angles. An interesting method to measure these angles involves measuring the spatial reflection from the wood surface when illuminated by concentrated light. The cellular shape of the wood microstructure causes the light reflection to be greatest perpendicular to the wood grain. This effect allows the surface and dive angles to be determined by analyzing the spatial variation of the reflected light. The conventional method for doing this involves sampling the reflection intensities around a circle above the wood surface. However, this method is effective only for small dive angles. A new method is described here where light reflection intensity variation is measured along two parallel lines on either side of the illuminated area. It is able to measure the ranges of surface and dive angles of interest in strength grading applications. A laboratory device for making the required spatial reflection measurements is described and experimental results are presented.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Remote Sensing and LiDAR Applications · Industrial Vision Systems and Defect Detection · Surface Roughness and Optical Measurements
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. American National Standards Institute (ANSI). 2007. American national standards for ladders—Wood safety requirements. Standard A14.1. ANSI, Washington, D.C.
2. Astrand, E. 2011. Building a high-performance camera for wood inspection. EETimes. http://www.eetimes.com/document.asp?doc_id=1279213. Accessed December 11, 2016.
3. Brannstrom, M., J. Manninen, and J. Oja. 2008. Predicting the strength of sawn wood by tracheid laser scattering. BioResources3(2):437–451.
4. Buksnowitz, C., U. Muller, R. Evans, A. Teischinger, and M. Grabner. 2008. The potential of SilviScan's X-ray diffractometry method for the rapid assessment of spiral grain in softwood, evaluated by goniometric measurements. Wood Sci. Technol. 42(2):95–102.
5. Canadian Wood Council. 2016. Grades. http://cwc.ca/wood-products/lumber/visually-graded/grades/. Accessed December 11, 2016.
6. Core, H. A., W. A. Côté, and A. C. Day. 1979. Wood Structure and Identification. Syracuse University Press, Syracuse, New York.
7. Daval, V., G. Pot, M. Belkacemi, F. Meriaudeau, and R. Collet. 2015. Automatic measurement of wood fiber orientation and knot detection using an optical system based on heating conduction. Opt. Soc. Am. 23(26):33529–33539.
8. Faria, R., R. Braga, Jr., A. Neto, N. Trindade, F. Mori, and G. Horgan. 2008. Reliability of wood grain orientation measurement using laser illumination. Biosyst. Eng. 100(4):479–483.
9. Kretschmann, D. 2010. Mechanical properties of wood, chap. 5. In:Wood Handbook, Wood as an Engineering Material. FPL-GTR-190. USDA Forest Products Laboratory, Madison, Wisconsin.
10. Matthews, P. C. and J. F. Soest, 1986. Method for determining localized fiber angle in a three dimensional fibrous material. US patent 4606645. US Patent and Trademark Office, Washington, D.C.
11. McGunnigle, G. 2009. Estimating fibre orientation in spruce using lighting direction. IET Comput. Vis. 3(3):143–158.
12. McLauchlan, T. A., J. A. Norton, and D. J. Kusec. 1973. Slope of grain indicator. Forest Prod. J. 23(5):50–55.
13. Nicodemus, F. 1965. Directional reflectance and emissivity of an opaque surface. Appl. Opt. 4(7):767–775.
14. Nieminen, S., J. Heikkinen, and J. Raty. 2013. Laser transillumination imaging for determining wood defects and grain angle. Meas. Sci. Technol. 24(12):125401.
15. Schajer, G. S. and F. B. Orhan, 2006. Measurement of wood grain angle, moisture content and density using microwaves. Holz Roh- Werkst. 64(6):483–490.
16. Schajer, G. S. and D. B. Sutton. 2016. Identification of 3D wood grain angle by directional reflection measurement. Wood Mater. Sci. Eng. 11(3):170–175.
17. Simonaho, S.-P., J. Palviainen, Y. Tolonen, and R. Silvennoinen. 2004. Determination of wood grain direction from laser light scattering pattern. Opt. Lasers Eng. 41(1):95–103.
18. Zhou, J. and J. Shen. 2003. Ellipse detection and phase demodulation for wood grain orientation measurement based on the tracheid effect. Opt. Lasers Eng. 39(1):73–89.