journal article·2020-11-12Open access

Alkali-Activated Binders From Waste Incinerator Bottom Ashes and Metakaolin Reinforced by Recycled Carbon Fiber Composites

Stefania Manzi, Isabella Lancellotti, Giulia Masi, Andrea Saccani

Abstract

In view of creating low-impact materials for the building industry, the fostering of alkali-activated binder gains high importance. Metakaolin can successfully be activated with alkalis at room temperature but the contemporary use of wastes to create mixed binders can further increase the derived environmental benefits. Bottom ashes deriving from the incineration of municipal solid wastes have been tentatively mixed in different amounts to develop matrix with acceptable mechanical properties, still to be cured at room temperature. Moreover, scraps deriving from the production of epoxy/carbon fibre composites are employed as a reinforcing phase. No chemical or physical treatments have been used to modify the epoxy/carbon fibre wastes, apart from size reduction, thus minimizing the overall economic and energy impact of the process. The workability, physical and mechanical properties, microstructure and porosity of the obtained materials are investigated. Up to a 50 weight % amount of municipal solid waste incineration bottom ashes can be mixed with metakaolin. Fibres still embedded in the epoxy matrix disclose a fair interaction with the matrix thus managing to increase flexural strength, toughness and dimensional stability without decreasing the compressive strength.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Influence of pore structure on the strength behavior of particle and fiber-reinforced metakaolin-based geopolymer composites10.1016/j.cemconcomp.2019.103361 ↗
2. Mechanical and microstructural characterization of fiber reinforced fly ash based geopolymer composites10.1016/j.conbuildmat.2018.02.061 ↗
3. Effect of cure temperature on the formation of metakaolinite-based geopolymer10.1016/j.ceramint.2015.02.022 ↗
4. Standard test method for length change of hydraulic-cement mortars exposed to a sulfate solution
5. Performance evaluation of metakaolin geopolymer modified by different solid wastes10.1016/j.jclepro.2019.04.093 ↗
6. Matrix hybridization using waste fuel ash and slag in alkali-activated composites and its influence on maturity of fibre-matrix bond10.1016/j.jclepro.2018.01.001 ↗
7. Geopolymers with a high percentage of bottom ash for solidification/immobilization of different toxic metals10.1016/j.jhazmat.2016.06.059 ↗
8. Geopolymers obtained from bottom ash as source of aluminosilicate cured at room temperature10.1016/j.conbuildmat.2017.09.111 ↗
9. Performance of blended metakaolin/blastfurnace slag alkali-activated mortars10.1016/j.cemconcomp.2016.04.008 ↗
10. Solidification and stabilization of sewage sludge and MSWI bottom ash for beneficial use as construction materials10.1061/(ASCE)MT.1943-5533.0002572 ↗
11. Early age hydration of blended cement with different size fractions of municipal solid waste incineration bottom ash10.1016/j.conbuildmat.2017.09.063 ↗
12. The effects of Na2O/SiO2 molar ratio, curing temperature and age on compressive strength, morphology and microstructure of alkali-activated fly ash-based geopolymers10.1016/j.cemconcomp.2011.03.006 ↗
13. Tensile performance of eco-friendly ductile geopolymer composites (EDGC) incorporating different micro-fibers10.1016/j.cemconcomp.2019.05.004 ↗
14. Pore properties, inner chemical environment, and microstructure of nano-modified CFA-WBP (class C fly ash-waste brick powder) based geopolymers10.1016/j.cemconcomp.2017.01.007 ↗
15. Use of slaked lime and Portland cement to improve the resistance of MSWI bottom ash-GBFS geopolymer concrete against carbonation10.1016/j.conbuildmat.2018.01.089 ↗
16. Use of washed municipal solid waste incinerator bottom ash in pervious concrete10.1016/j.cemconcomp.2013.01.001 ↗
17. Geopolymers: an option for the valorization of incinerator bottom ash derived “end of waste”10.1016/j.ceramint.2014.10.008 ↗
18. Alkali activation processes for incinerator residues management10.1016/j.wasman.2013.04.013 ↗
19. Incinerator BA and Ladle slag for geopolymers preparation10.1007/s12649-014-9299-2 ↗
20. Utilization of municipal solid waste incineration bottom ash in blended cement10.1016/j.jclepro.2012.03.038 ↗
21. Metakaolin bottom ash blend geopolymer mortar – a feasibility study10.1016/j.conbuildmat.2016.03.149 ↗
22. Carbon fiber waste incorporation in blast furnace slag geopolymer-composites10.1016/j.matlet.2018.08.099 ↗
23. Effect of curing temperature on the development of hard structure of metakaolin-based geopolymer10.1016/j.conbuildmat.2009.12.023 ↗
24. Composites obtained by recycling carbon fibre/epoxy composite wastes in building materials10.1016/j.conbuildmat.2019.01.216 ↗
25. Influence of the pozzolanic fraction obtained from vitrified bottom ashes from MSWI on the properties of cementitiuos composites10.1007/BF02479303 ↗
26. Structural studies and electrical properties of re-cycled glasses from glass and incinerator wastes10.1023/A:1017539932421 ↗
27. A novel raw material for geopolymers: coal-based synthetic natural gas slag10.1016/j.jclepro.2020.121238 ↗
28. Use of municipal solid waste incineration bottom ashes in alkali-activated materials, ceramics and granular applications: a review10.1016/j.wasman.2017.06.043 ↗
29. One year geopolymerisation of sodium silicate activated fly ash and metakaolin geopolymers10.1016/j.cemconcomp.2018.10.014 ↗
30. Application of thermally activated municipal solid waste incineration (MSWI) bottom ash fines as binder substitute10.1016/j.cemconcomp.2016.03.015 ↗
31. Review of mechanical properties of short fibre reinforced geopolymer composites10.1016/j.conbuildmat. ↗
32. 2005
33. Mechanical properties of alkali activated blast furnace slag pastes reinforced with carbon fibers10.1016/j.conbuildmat.2016.04.066 ↗
34. Effects of alkali treated recycled carbon fiber on the strength and free drying shrinkage of cementitious mortar10.1016/j.jclepro.2019.04.295 ↗
35. Use of municipal solid waste incinerator (MSWI) bottom ash in high calcium fly ash geopolymer10.1016/j.jclepro.2017.01.147 ↗
36. Characterization of calcium containing phases in alkali-activated municipal solid waste incineration bottom ash binder through chemical extraction and deconvoluted Fourier transform infrared spectra10.1016/j.jclepro.2018.05.049 ↗