journal article·2025-07-10Open access

Effect of different fly ash ratios on the mechanical properties of hybrid steel fiber reinforced concrete

Necim Kaya

Abstract

This study explores the influence of varying proportions (5%, 15%, and 25%) of Class F fly ash on the mechanical properties of hybrid steel fiber-reinforced concrete (HSFRC). Concrete mixtures were prepared with fixed total steel fiber content (1% by volume) using micro and macro fibers in specific ratios. Portland cement was partially replaced by fly ash, and slump, compressive, flexural, and splitting tensile strength tests were conducted at 7, 28, and 90 days according to TS EN and ASTM standards. The results showed that while early-age strength decreased due to the slow pozzolanic activity of fly ash, the mixture containing 15% fly ash consistently provided the best mechanical performance at 90 days, reaching a compressive strength of 81 MPa. These findings confirm that 15% fly ash is an optimal replacement level for long-term strength development in HSFRC. The study also emphasizes the economic and environmental benefits of incorporating fly ash in concrete production.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Effecting of steel fibers and fly ash on the properties of concrete10.25130/tjes.25.4.06 ↗
2. High-performance fiber-reinforced concrete: a review10.1007/s10853-016-9917-4 ↗
3. Ultra-high-performance fiber-reinforced concrete. Part II: hydration and microstructure10.1016/j.cscm.2022.e01289 ↗
4. Combined influence of waste steel fibre and fly ash on rheological and mechanical performance of fibre-reinforced concrete10.1080/14488353.2020.1857927 ↗
5. Physical properties of steel fiber reinforced cement composites made with fly ash
6. Farklı boyutlardaki poliamid, poliester ve jüt liflerinin betonun mekanik davranışına etkisi10.47137/usufedbid.853757 ↗
7. Standard specifications for steel fibers for fiber reinforced concrete 2004
8. 2019
9. Properties of steel fiber reinforced fly ash concrete10.1016/j.conbuildmat.2007.11.002 ↗
10. Improving performance of additive manufactured (3D printed) concrete: a review on material mix design, processing, interlayer bonding, and reinforcing methods10.1016/j.istruc.2020.12.061 ↗
11. The effect of single and hybrid fibres on fibre reinforced self compacting concrete produced with high level of fly ash usage
12. Çelik lif donatılı betonun eğilme tokluğu
13. Fibres for concrete-Part 1: steel fibres-definitions, specifications and conformity
14. Effect of constituents on rheological properties of fresh concrete-A review10.1016/j.cemconcomp.2017.07.016 ↗
15. Review of high and ultrahigh performance cementitious composites incorporating various combinations of fibers and ultrafines10.1016/j.jksues.2017.03.006 ↗
16. Effects of different mineral admixtures on the properties of fresh concrete10.1155/2014/986567 ↗
17. Influence of some selected supplementary cementitious materials on workability and compressive strength of concrete – a review10.1088/1757-899x/640/1/012071 ↗
18. Materials for production of high and ultra-high performance concrete: review and perspective of possible novel materials10.3390/ma14154304 ↗
19. Strength characteristics and microstructure of hooked-end steel fiber reinforced concrete containing fly ash, bottom ash and their combination10.1016/j.conbuildmat.2020.118530 ↗
20. Farklı lif oranına sahip çelik lif takviyeli beton kirişlerde çarpma etkisi10.46460/ijiea.986369 ↗
21. Self-healing in cementitious materials-A review10.3390/ma6062182 ↗
22. Uçucu kül ve çelik liflerin beton ve beton borularda kullanımı. Eskişehir osmangazi üniversitesi mühendislik ve mimarlık fakültesi dergisi
23. 2016
24. Testing fresh concrete-Part 2: slump test
25. Concrete hardened concrete tests - Part 3: determination of compressive strength of test specimens
26. 2019
27. Concrete hardened concrete tests-Part 6: determination of the splitting tensile strength of test samples
28. Cement-Part 1: general cements-composition, properties and conformity criteria
29. Karma çelik lifli kendiliğinden yerleşen betonun elektriksel direnci10.21923/jesd.960538 ↗
30. Karma lif takviyeli KYB karışımlarının i̇şlenebilirlik ve mühendislik özelliklerinin araştırılması10.17798/bitlisfen.984473 ↗
31. Çimento harçlarında optimum uçucu kül ve PVA lif oranının belirlenmesi10.2339/politeknik.770831 ↗
32. Çelik lif donatılı betonların performans sınıfları
33. Çelik lif katkılı betonların mekanik özelliklerinin i̇ncelenmesi10.12739/NWSA.2016.11.4.1A0366 ↗