journal article·2016-12

Microstructure and inclusion of Ti–6Al–4V fabricated by selective laser melting

Qianli Huang, Ningmin Hu, Xing Yang, Ranran Zhang, Qingling Feng

Frontiers of Materials Science· Volume 10· Issue 4
Publisher page

Abstract

Selective laser melting (SLM) was used in fabricating the dense part from pre-alloyed Ti-6Al-4V powder. The microstructural evolution and inclusion formation of as-fabricated part were characterized in depth. The microstructure was characterized by features of columnar prior β grains and acicular martensite α'. High density defects such as dislocations and twins can be produced in SLM process. Investigations on the inclusions find out that hard alpha inclusion, amorphous CaO and microcrystalline Al2O3 are three main inclusions formed in SLM. The inclusions formed at some specific sites on melt pool surface. The microstructural evolution and inclusion formation of as-fabricated material are closely related to the SLM process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Xin X, Xiang N, Chen J, et al. In vitro biocompatibility of Co–Cr alloy fabricated by selective laser melting or traditional casting techniques. Materials Letters, 2012, 88: 101–10310.1016/j.matlet.2012.08.032 ↗
2. Thijs L, Verhaeghe F, Craeghs T, et al. A study of the microstructural evolution during selective laser melting of Ti–6Al–4V. Acta Materialia, 2010, 58(9): 3303–331210.1016/j.actamat.2010.02.004 ↗
3. Simonelli M, Tse Y Y, Tuck C. On the texture formation of selective laser melted Ti–6Al–4V. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2014, 45(6): 2863–287210.1007/s11661-014-2218-0 ↗
4. Murr L E, Quinones S A, Gaytan S M, et al. Microstructure and mechanical behavior of Ti–6Al–4V produced by rapid-layer manufacturing, for biomedical applications. Journal of the Mechanical Behavior of Biomedical Materials, 2009, 2(1): 20–3210.1016/j.jmbbm.2008.05.004 ↗
5. Manero J M, Gil F J, Planell J A. Deformation mechanisms of Ti–6Al–4V alloy with a martensitic microstructure subjected to oligocyclic fatigue. Acta Materialia, 2000, 48(13): 3353–335910.1016/S1359-6454(00)00152-X ↗
6. Vandenbroucke B, Kruth J P. Selective laser melting of biocompatible metals for rapid manufacturing of medical parts. Rapid Prototyping Journal, 2007, 13(4): 196–20310.1108/13552540710776142 ↗
7. Sears JW. Current processes for the cold-wall melting of titanium. JOM, 1990, 42(3): 17–2110.1007/BF03220888 ↗
8. Cotton J, Clark L, Phelps H. Titanium investiment casting defects: A metallographic overview. JOM, 2006, 58(6): 13–1610.1007/s11837-006-0172-z ↗
9. Zhang Y, Cao X, Wanjara P, et al. Oxide films in laser additive manufactured Inconel 718. Acta Materialia, 2013, 61(17): 6562–657610.1016/j.actamat.2013.07.039 ↗
10. Hartman M, Pata J, Coughlin R W. Influence of porosity of calcium carbonates on their reactivity with sulfur dioxide. Industrial & Engineering Chemistry Process Design and Development, 1978, 17(4): 411–41910.1021/i260068a006 ↗
11. Sofie S W, Dogan F. Freeze casting of aqueous alumina slurries with glycerol. Journal of the American Ceramic Society, 2001, 84 (7): 1459–146410.1111/j.1151-2916.2001.tb00860.x ↗