Source abstract
Abstract
This study investigates the degradation of textured High-Density Polyethene (HDPE) geomembranes (GMs) subjected to natural weathering for 8.5 to 10.5 years. The GMs, denoted as GM-W/B (white and black), GM-G (green) and GM-B (black), had a nominal thickness of 1.00 mm and were manufactured using a flat die process with texture on both surfaces. Standard Oxidation Induction Time (Std-OIT) tests and Thermogravimetric Analysis (TG/DTG) were performed to assess the antioxidant depletion and thermal decomposition. Additionally, degradation due to Ultraviolet (UV) radiation and environmental agents was assessed through retained physical and mechanical properties, including the Melt Flow Index (MFI) measured under various loading conditions. Antioxidant depletion and TG/DTG analyses indicated that environmental exposure compromised the thermal stability of these GMs. Among the tested GMs, GM-W/B exhibited the greatest reduction in both Std-OIT and MFI, followed by GM-G and GM-B, suggesting a direct correlation between these properties. While GM-B appeared to be still in the antioxidant depletion stage (Stage I), GM-W/B and GM-G showed signs of degradation beyond Stage I. This study provides insights into the degradation of textured HDPE GMs in the face of weathering exposure effects and the durability of colored HDPE GMs.
Source: crossref · Quality: baseline
Affiliations
University of São Paulo (USP) 1 PhD Student, Department of Geotechnical Engineering, São Carlos School of Engineering (EESC), , São Carlos,
University of São Paulo (USP) 2 PhD, Department of Geotechnical Engineering, São Carlos School of Engineering (EESC), , São Carlos, , E-mail: mkobelnik@gmail.com
University of São Paulo (USP) 3 MSc, Department of Geotechnical Engineering, São Carlos School of Engineering (EESC), , São Carlos, , E-mail: cclever@sc.usp.br
Nortene Group 4 Polymer Engineer, , Barueri, , E-mail: carol.fofonka@hotmail.com
University of São Paulo (USP) 5 Full Professor, Department of Hydraulics and Sanitation, São Carlos School of Engineering (EESC), , São Carlos, , E-mail: lysaboga@sc.usp.br
University of São Paulo (USP) 6 Associate Professor, Department of Geotechnical Engineering, São Carlos School of Engineering (EESC), , São Carlos, , E-mail: jefferson@sc.usp.br
References (51)
Show source-provided references
2. Performance benefits of white formulation HDPE GMs
3. ASTM
4. ASTM
5. ASTM
6. ASTM
7. ASTM
8. ASTM
9. ASTM
10. ASTM
11. ASTM
12. ASTM
13. Clay desiccation of a single-composite liner system
14. White-surfaced HDPE geomembranes: Assessing their significance to liner design and installation
19. Geosynthetics: the solution for managing nuclear power generation water supply in an arid environment
20. GRI (Geosynthetic Research Institute) · 2024
21. GRI · 2024
24. ISO · 2020
25. Koerner · 1995
31. Martins · 2017
34. Muñoz Gómez, M. (2016). GM stress cracking resistance using various polymers, In: Proceedings of the 3rd Pan American Conference on Geosynthetics, Miami, ME, USA. pp. 10–13.
36. Ramsey · 2016
40. Antioxidant depletion in high-density polyethylene (HDPE) GM with hindered amine light stabilizers (HALS) in low-pH heap leach environment
10.1139/cgj-2016-0026 ↗44. An approach to high-density polyethylene (HDPE) GM selection for challenging design requirements
10.1139/cgj-2019-0572 ↗45. Effects of exposure conditions on the depletion of antioxidants from high-density polyethylene (HDPE) GMs
10.1139/t02-074 ↗48. Struve, F. (1994). Extrusion of GMs. In: Proceedings of the 8th GRI Conference, Geosynthetic Resins, Formulation and Manufacturing. G. Hsuan and RM Koerner, Editors, Industrial Fabrics Association International (IFAI), St. Paul, Minn. pp. 94–112.