journal article·2026-03-03

Rheological properties and viscoelastic model of sensor-enabled piezoelectric geocable

Z. Liu, G. Cai, J. Wang, M. Wu, C. Wang, Z. Lu, Q. Fang

Geosynthetics International· Volume 33· Issue 1
Publisher page

Abstract

Sensor-enabled piezoelectric geocables (SPGC) have attracted widespread attention as an emerging technology due to their effective strain and vibration monitoring effects. However, the mechanical and electrical properties of SPGC during long-term rheological processing remain unclear. In this study, the stepped isothermal method (SIM) was used to perform creep tests under different constant loads, and stress relaxation tests were conducted under different initial strains and strain rates. The creep test results show that SPGCs exhibit a decaying creep curve and are a typical viscoelastic-plastic material. The time-strain and the time-normalized impedance change value curves of SPGC conform to the logarithmic creep empirical model and viscoelastic constitutive model. The normalized impedance change value of SPGC increased with the increase of initial stress level and creep strain. At initial stress levels of 30%, 50%, and 60%σT, the creep strains of SPGC after 51.3 years were expected to reach 1.08%, 3.29%, and 5.31%, and the corresponding normalized impedance change values would reach 0.0771, 0.1704, and 0.2246. The results of the stress relaxation test showed that the normalized impedance change value of SPGC decreased with stress relaxation. The normalized impedance change value had a linear functional relationship with both the initial strain and the strain rate. The tensile strain and strain rate of SPGC caused by the sliding surface of the soil can be determined by monitoring the rate of growth of the normalized impedance change value. The research results fill a gap in the long-term rheological properties of SPGC and provide support for further practical applications of SPGC.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Fiber Optic Sensors · Smart Materials for Construction · Transport Systems and Technology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Southeast University 1 Institute of Geotechnical Engineering, , Nanjing, , E-mail: liuzhiming680@163.com

Southeast University 2 Institute of Geotechnical Engineering, , Nanjing, PR

Wenzhou University 3 College of Civil Engineering and Architecture, , Wenzhou, PR , E-mail: junwangx9s@163.com

Hohai University 4 School of Earth Science and Engineering, , Nanjing, , E-mail: wm542779989@gmail.com

Xinjiang University 5 College of Civil Engineering and Architecture, , Urumqi, , E-mail: wangcaijin_xju@163.com

Southeast University 6 Institute of Geotechnical Engineering, , Nanjing, , E-mail: george_lu@seu.edu.cn

Wenzhou University 7 College of Civil Engineering and Architecture, , Wenzhou, , E-mail: 200917317@qq.com

Funding

National Natural Science Foundation of China for Distinguished Young Scholars · National Natural Science Foundation of China · International Cooperation and Exchange of the National Natural Science Foundation of China · Wenzhou City Major Scientific and Technological Innovation Project · Southeast University Innovation Capability Enhancement Plan for Doctoral Students

References (40)

Show source-provided references
1. Application of novel distributed fibre-optic sensing for slope deformation monitoring: a comprehensive review10.1007/s13762-022-04697-5 ↗
2. Accelerated creep testing of polymers using the stepped isothermal method10.1016/j.polymertesting.2013.01.014 ↗
3. ASTM D5262-21
4. Comparison of accelerated compressive creep behavior of virgin HDPE using thermal and energy approaches10.1007/s11665-010-9743-9 ↗
5. Conventional and accelerated creep tests on nonwoven needle-punched geotextiles10.1680/gein.2005.12.6.276 ↗
6. Monitoring performance of a new smart geosynthetic under drawing test10.1680/jgein.24.00022 ↗
7. Experimental research on geological fissure monitoring based on distributed piezoelectric sensing technology10.1016/J.ENGGEO.2025.107941 ↗
8. Impact of engineering geological environment on sensor-enabled piezoelectric geocable (SPGC) monitoring performance—accelerated aging test10.1016/j.enggeo.2025.107970 ↗
9. Laboratory tests on the engineering properties of sensor-enabled geobelts (SEGB)10.1680/gein.2005.12.6.276 ↗
10. Viscoelastic behavior with damage evolution of a new smart geosynthetic in service temperature range10.1007/s11771-022-5011-z ↗
11. Linear-least-squares initialization of multilayer perceptrons through backpropagation of the desired tesponse10.1109/TNN.2004.841777 ↗
12. Effect of carbon black structure on low-strain conductivity of polypropylene and low-density polyethylene composites10.1002/pen.22115 ↗
13. Creep behavior of geosynthetics using confined-accelerated tests10.3233/978-1-61499-297-4-90 ↗
14. Sensor-enabled geosynthetics: use of conducting carbon networks as geosynthetic sensors10.1061/(ASCE)GT.1943-5606.0000062 ↗
15. Creep characteristics of composite geomembrane based on viscoelastic models10.1061/JMCEE7.MTENG-16225 ↗
16. Recent progress of using brillouin distributed fiber optic sensors for geotechnical health monitoring10.1016/j.sna.2017.03.017 ↗
17. Theoretical framework to analyse the behaviour of polymer geosynthetic reinforcement in temperature-accelerated creep tests10.1680/gein.2007.14.1.23 ↗
18. Laboratory investigation of the durability of a new smart geosynthetic material10.1016/j.conbuildmat.2018.02.187 ↗
19. Unified elastoplastic-viscoplastic bounding surface model of geosynthetics and its applications to geosynthetic reinforced soil-retaining wall analysis10.1061/(ASCE)0733-9399(2007)133:7(801) ↗
20. Evaluation of mechanical and electrical properties of a new sensor-enabled piezoelectric geocable for landslide monitoring10.1016/j.measurement.2023.112667 ↗
21. Landslide monitoring suitability of sensor-enabled piezoelectric geocables based on drawing tests10.1109/JSEN.2023.3310589 ↗
22. Comprehensive study on fatigue degradation of road piezoelectric energy harvesters under thermal-mechanical coupling effect10.1088/1361-665X/acb186 ↗
23. Evaluating the subgrade deformation monitoring effect of sensor-enabled piezoelectric geocables based on cyclic dynamic shear tests10.1007/s11440-023-01965-7 ↗
24. Experimental and theoretical research on deformation monitoring of distributed piezoelectric inclinometer tube10.1016/j.measurement.2024.115774 ↗
25. Visco-elastic response of combined footings on earth beds with geocell-geomembrane inclusions10.1007/s12517-020-06127-7 ↗
26. Response of sensor-enabled piezoelectric geobelt reinforced soil pullout friction signals10.1680/jgein.23.00108 ↗
27. Laboratory preparation and tensile signal response of sensor-enabled piezoelectric geobelt10.1680/jgein.23.00003 ↗
28. DFOS applications to Geo-Engineering monitoring10.1007/s13320-021-0620-y ↗
29. Radial stresses and resilient deformations of geogrid-stabilized unpaved roads under cyclic plate loading tests10.1016/j.geotexmem.2015.04.018 ↗
30. Geohazards in the three gorges reservoir area, China lessons learned from decades of research10.1016/j.enggeo.2019.105267 ↗
31. Development and performance analysis of hemispherical piezoelectric transducer for road applications10.1080/00150193.2021.1984760 ↗
32. Indoor tests of sensor-enabled piezoelectric geocable-geogrid composite structure for slope rehabilitation and monitoring10.1016/J.ENGGEO.2024.107780 ↗
33. Creep characteristics and model study of composite geomembrane with different film thicknesses
34. Electrical conductivity and mechanical performance of multiwalled CNT-filled polyvinyl chloride composites subjected to tensile load10.1002/app.43665 ↗
35. Experimental study on road piezoelectric energy harvesters' power generation performance under erosive environments10.1002/er.8713 ↗
36. Properties of PSN-PZT piezoelectric ceramic powder prepared by fastsolid-phase reaction method10.1016/j.mtcomm.2023.106086 ↗
37. Experimental study on axial compression monitoring of pile foundation based on sensor-enabled piezoelectric geocable10.1088/1361-665X/acfad7 ↗
38. Experimental study of a 3D printed geogrid embedded with FBG sensor for reinforcement of subgrade with underlying cave10.1016/j.geotexmem.2023.05.001 ↗
39. A fast and precise methodology of creep master curve construction for geosynthetics based on stepped isothermal method (SIM)10.1016/j.geotexmem.2021.01.005 ↗
40. Output performance of a road energy harvester based on piezoelectric ceramic recycling technology10.1007/s11664-023-10323-y ↗