Calculation of Stresses in Plasma-Deposited Amorphous Metallic Coatings
Source abstract
Abstract
The stresses in deposited amorphous metallic coatings prepared from quenched amorphous alloys are calculated. The calculations are performed under the assumption that amorphous coatings on a substrate can be considered glass seals with an elastic solid, for which available methods of calculating stresses work fairly well. It is shown that calculations based on such an approach can be useful in choosing the parameters and conditions for producing coatings and in predicting their service properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Metal and Thin Film Mechanics · Advanced Materials and Semiconductor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Sokolov, O.G. and Farmakovskii, B.V., High-Rate and High-Energy Technologies of Fabricating and Processing New Materials, Trudy XVII soveshchaniya po temperaturoustoichivym funktsional'nym pokrytiyam (Proceedings of XVII Conference on Heat-Resistant Functional Coatings), St. Petersburg, 1997, part 2, pp. 128–134.
2. Borisov, Yu.S., Current Trends in the Development of Gas-Thermal Evaporation of Coatings, V Mezhdunarodnaya konferentsiya "Plenki i Pokrytiya'98" (V International Conference "Films and Coatings'98"), St. Petersburg, 1998, pp. 14–19.
3. Kalita, V.I., Komlev, D.I., Korol'kov, N.V., and Leitus, G.M., Microstructure Formation in Plasma Deposition of Coatings with an Amorphous Structure, Fiz. Khim. Obr. Mater., 1996, no. 3, pp. 62–70.
4. Kalita, V.I. and Komlev, D.I., Specific Features in the Structure Formation of Amorphous and Crystalline Coatings upon Plasma Deposition, Fiz. Khim. Obr. Mater., 1996, no. 4, pp. 43–46.
5. Timofeev, V.N., Kalita, V.I., and Komlev, D.I., Formation of Coatings with an Amorphous Structure upon Plasma Deposition, Fiz. Khim. Obr. Mater., 1996, no. 4, pp. 47–49.
6. Kudryanshov, K.N., Farmakovskii, B.V., and Tyulyukovskii, E.V., High-Energy Technologies of Fabricating Electromagnetic Screens from Amorphous and Composite Materials, Trudy XVII soveshchaniya po temperaturoustoichivym funktsional'nym pokrytiyam (Proceedings of XVII Conference on Heat-Resistant Functional Coatings), St. Petersburg, 1997, part 2, pp. 215–221.
7. Il'inykh, S.A., Polukhin, V.A., and Belyakova, R.M., The Role of Chemical Composition of Plasma in the Formation of Amorphized Metallic Plasma Coatings, V Mezhdunarodnaya konferentsiya "Plenki i Pokrytiya'98" (V International Conference "Films and Coatings'98"), St. Petersburg, 1998, pp. 181–185.
8. Kozyakov, I.A., Borisov, Yu.S., and Korzhik, V.N., Application of Gas-Thermal Amorphous Coatings in Electrical Engineering, V Mezhdunarodnaya konferentsiya "Plenki i Pokrytiya'98" (V International Conference "Films and Coatings'98"), St. Petersburg, 1998, pp.–113–115.
9. Korzhik, V.N., Powders and AMOTEK Powder Wires for Gas-Thermal Evaporation, V Mezhdunarodnaya konferentsiya "Plenki i Pokrytiya'98" (V International Conference "Films and Coatings'98"), St. Petersburg, 1998, pp.–275–277.
10. Borisov, Yu.S. and Sviridova, I.S., Gas-Thermal Evaporation and Properties of Epoxy Coatings, V Mezhdunarodnaya konferentsiya "Plenki i Pokrytiya'98" (V International Conference "Films and Coatings'98"), St. Petersburg, 1998, pp. 186–188.
11. Gnesin, G.G., Lyashenko, B.A., Fomenko, B.A., and Rutkovskii, A.V., Ion-Plasma Technology of Evaporating Wear-Resistant Coating onto Si3Ni4-Based Ceramic Cutting Plates, V Mezhdunarodnaya konferentsiya "Plenki i Pokrytiya'98" (V International Conference "Films and Coatings'98"), St. Petersburg, 1998, pp. 89–91.
12. Gavrilenko, T.P., Nikolaev, Yu.A., and Ul'yanitskii, V.Yu., Residual Stresses in Detonation Coatings, V Mezhdunarodnaya konferentsiya "Plenki i Pokrytiya'98" (V International Conference "Films and Coatings'98"),St. Petersburg, 1998, pp. 189–192.
13. Akulova, Yu.O., Gonchukova, N.O., Larionova, T.V., and Tolochko, O.V., Structural Relaxation in Amorphous Substances with Highly Non-Equilibrium Structure, J. Non-Cryst. Solids, 2000, vol. 261, no. 1, pp. 252–259.10.1016/S0022-3093(99)00585-2 ↗
14. Gonchukova, N.O., Akulova, Yu.O., Moshnikov, A.V., and Tolochko, O.V., Structural Relaxation in Amorphous Magnetic Screens, Fiz. Khim. Stekla, 2001, vol. 27, no. 3, pp. 347–352 [Glass Phys. Chem. (Engl. transl.), 2001, vol. 27, no. 3, pp. 228–232].
15. Mazurin, O.V., Otzhig spaev stekla s metallom (Annealing of Glass-to-Metal Seals), Leningrad: Energiya, 1980.
16. Kudinov, V.V., Pekshev, P.Yu., Belashchenko, V.E., et al., Nanesenie pokrytii plazmoi (Plasma Deposition of Coatings), Moscow: Nauka, 1990.
17. Rekhson, S.M. and Startsev, Yu.K., A Relaxation Model of Changes in Stresses under Annealing a Glass Seal with an Elastic Solid, Fiz. Khim. Stekla, 1977, vol. 3, no. 2, pp. 140–148.
18. Mazurin, O.V., Lebedeva, R.B., and Startsev, Yu.K., A Method of Calculating Stresses in Glass-to-Glass Seals, Fiz. Khim. Stekla, 1980, vol. 6, no. 2, pp. 190–194.
19. Gonchukova, N.O., A Quantitative Description of Structural Relaxation Phenomena in Amorphous Alloys, Fiz. Met. Metalloved., 1994, vol. 77, no. 3, pp. 70–80.
20. Novikov, V.N. and Khar'kov, E.I., Thermal Expansion Coefficients and Grüneisen Constants for Metallic Glasses Based on Fe, Ni, and Co, Fiz. Khim. Stekla, 1987, vol. 13, no. 5, pp. 764–768.
21. Sverkhbystraya zakalka zhidkikh splavov (Ultrafast Quenching of Liquid Alloys), German, G., Ed., Moscow: Metallurgiya, 1986.
22. Alkhimov, A.P., Klinkov, S.V., Kosarev, V.F., and Nesterovich, N.I., Gas-Dynamic Deposition: The Current State and Prospects, V Mezhdunarodnaya konferentsiya "Plenki i Pokrytiya'98" (V International Conference "Films and Coatings'98"), St. Petersburg, 1998, pp. 20–25.
23. Ferry, J.D., Visco-Elastic Properties of Polymers, New York: Wiley, 1961. Translated under the title Vyazkouprugie svoistva polimerov, Moscow: Inostrannaya Literatura, 1963.
24. Klyuev, V.P. and Chernousov, M.A., An Automated Dilatometer with a Low Measuring Load, Tezisy dokladov III Vsesoyuznogo soveshchaniya "Metody i pribory dlya tochnykh dilatometricheskikh issledovanii materialov v shirokom diapazone temperatur" (Proceedings of the III All-Union Conference "Methods and Instruments for Precision Dilatometric Investigations of Materials over a Wide Range of Temperatures"), Leningrad: VNIIM, 1984, pp. 53–54.
25. Spravochnik metallurga po tsvetnym metallam (A Metallurgist Handbook on Nonferrous Metals), Murach, N.N., Ed., Moscow: Gos. Nauchno-Tekh. Izd. Chern. Tsvet. Met., 1953.