journal article·2024-12

Ceramic Composites Based on Zircon and Hafnium Oxide

V. L. Ugolkov, N. A. Koval’chuk, A. V. Osipov, L. P. Mezentseva

Glass Physics and Chemistry· Volume 50· Issue 6
Publisher page

Abstract

Abstract By sintering nanosized powders in air in the range of 1000–1300°C, ceramic composites (1 – x)ZrSiO4–xHfO2 with low thermal conductivity are obtained. It is shown that at a temperature of 1300°C the composites are a mixture of monoclinic solid solutions of HfxZr1 – xO2 and SiO2. For the first time, the temperature–concentration dependencies of the thermal conductivity of the obtained ceramic samples are presented. Using electron microscopy, the fracture surface of ceramic samples after sintering at 1300°C is investigated, their thermal behavior is studied using dilatometry, and the temperature coefficient of linear expansion is estimated.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Nuclear materials and radiation effects · Advanced ceramic materials synthesis · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Grechanovsky, A.E., Urusov, V.S., and Eremin, N.N., Molecular dynamics study of self-radiation damage in mineral matrices, J. Struct. Chem., 2016, vol. 57, no. 6, pp. 1243–1262. https://doi.org/10.1134/s002247661606026310.1134/s0022476616060263 ↗
2. Ferriss, E.D.A., Ewing, R.C., and Becker, U., Simulation of thermodynamic mixing properties of actinide-containing zircon solid solutions, Am. Mineral., 2010, vol. 95, nos. 2–3, pp. 229–241. https://doi.org/10.2138/am.2010.331810.2138/am.2010.3318 ↗
3. Burakov, B.E., Ojovan, M.I., and Lee, W.(B.).E., Crystalline Materials for Actinide Immobilisation, Materials for Engineering, vol. 1, London: Imperial College Press, 2011. https://doi.org/10.1142/978184816419210.1142/9781848164192 ↗
4. Williford, R.E., Begg, B.D., Weber, W.J., and Hess, N.J., Computer simulation of Pu3+ and Pu4+ substitutions in zircon, J. Nucl. Mater., 2000, vol. 278, nos. 2–3, pp. 207–211. https://doi.org/10.1016/s0022-3115(99)00244-510.1016/s0022-3115(99)00244-5 ↗
5. Wang, L. and Liang, T., Ceramics for high level radioactive waste solidification, J. Adv. Ceram., 2012, vol. 1, no. 3, pp. 194–203. https://doi.org/10.1007/s40145-012-0019-810.1007/s40145-012-0019-8 ↗
6. Rosado, E., Alcázar, C., Recio, P., and Moreno, R., Consolidation of complex-shape zircon compacts through agar gelation, Eur. J. Mater., 2022, vol. 2, no. 1, pp. 407–421. https://doi.org/10.1080/26889277.2022.208162110.1080/26889277.2022.2081621 ↗
7. Orlova, A.I. and Ojovan, M.I., Ceramic mineral waste-forms for nuclear waste immobilization, Materials, 2019, vol. 12, no. 16, p. 2638. https://doi.org/10.3390/ma1216263810.3390/ma12162638 ↗
8. Ewing, R.C., The design and evaluation of nuclear-waste forms: Clues from mineralogy, Can. Mineral., 2001, vol. 39, no. 3, pp. 697–715. https://doi.org/10.2113/gscanmin.39.3.69710.2113/gscanmin.39.3.697 ↗
9. Ugolkov, V.L., Koval’chuk, N.A., Osipov, A.V., and Mezentseva, L.P., Sol-gel synthesis of nano-sized powders and fabrication of ceramic composites based on zircon and hafnium oxide, Glass Phys. Chem., 2024, vol. 50, no. 3, pp. 277–285. https://doi.org/10.1134/s108765962460056x10.1134/s108765962460056x ↗
10. Ugolkov, V.L., Koval’chuk, N.A., Osipov, A.V., Mezentseva, L.P., and Akatov, A.A., Ceramic composites based on zircon and zirconium dioxide, Refract. Ind. Ceram., 2024, vol. 64, no. 5, pp. 492–496. https://doi.org/10.1007/s11148-024-00877-710.1007/s11148-024-00877-7 ↗
11. Tang, J., Fabbri, J., Robinson, R.D., Zhu, Yi., Herman, I.P., Steigerwald, M.L., and Brus, L.E., Solid-solution nanoparticles: Use of a nonhydrolytic sol−gel synthesis to prepare HfO2 and HfxZr1 – xO2 nanocrystals, Chem. Mater., 2004, vol. 16, no. 7, pp. 1336–1342. https://doi.org/10.1021/cm049945w10.1021/cm049945w ↗
12. Ugolkov, V.L., Koval’chuk, N.A., Osipov, A.V., and Mezentseva, L.P., Sol-gel synthesis of nanosized powders and obtaining ceramic composites based on zircon and zirconium oxide, Glass Phys. Chem., 2023, vol. 49, no. 5, pp. 503–509. https://doi.org/10.1134/s108765962360054010.1134/s1087659623600540 ↗
13. Huang, Sh., Li, Q., Wang, Zh., Cheng, X., and Wen, H., Effect of sintering aids on the microstructure and oxidation behavior of hot-pressed zirconium silicate ceramic, Ceram. Int., 2017, vol. 43, no. 1, pp. 875–879. https://doi.org/10.1016/j.ceramint.2016.09.15210.1016/j.ceramint.2016.09.152 ↗
14. Antsiferov, V.N., Kul’met’eva, V.B., Porozova, S.E., and Krokhaleva, E.G., Effect of nanodispersed zirconium dioxide on the consolidation and properties of a zircon-based ceramic, Refract. Ind. Ceram., 2011, vol. 52, no. 2, pp. 151–154. https://doi.org/10.1007/s11148-011-9385-y10.1007/s11148-011-9385-y ↗
15. Stansfield, M., Thermal expansion of polycrystalline HfO2—ZrO2 solid sohtions, J. Am. Ceram. Soc., 1965, vol. 48, no. 8, pp. 436–437. https://doi.org/10.1111/j.1151-2916.1965.tb14787.x10.1111/j.1151-2916.1965.tb14787.x ↗
16. Bakradze, M.M., Doronin, O.N., Artemenko, N.I., Stekhov, P.A., Marakhovskii, P.S., and Stolyarova, V.L., Physicochemical properties of Sm2O3–ZrO2–HfO2 ceramics for the development of promising thermal barrier coatings, Russ. J. Inorg. Chem., 2021, vol. 66, no. 5, pp. 789–797. https://doi.org/10.1134/s003602362105003x10.1134/s003602362105003x ↗
17. Haggerty, R.P., Sarin, P., Apostolov, Z.D., Driemeyer, P.E., and Kriven, W.M., Thermal expansion of HfO2 and ZrO2, J. Am. Ceram. Soc., 2014, vol. 97, no. 7, pp. 2213–2222. https://doi.org/10.1111/jace.1297510.1111/jace.12975 ↗
18. Rendtorff, N.M., Grasso, Salvatore., Hu, Ch., Suarez, G., Aglietti, E.F., and Sakka, Yo., Dense zircon (ZrSiO4) ceramics by high energy ball milling and spark plasma sintering, Ceram. Int., 2012, vol. 38, no. 3, pp. 1793–1799. https://doi.org/10.1016/j.ceramint.2011.10.00110.1016/j.ceramint.2011.10.001 ↗
19. Musyarofah, Nurlaila, R., Muwwaqor, N.F., Saukani, M., Kuswoyo, A., Triwikantoro, and Pratapa, S., Phase study of SiO2–ZrO2 composites prepared from polymorphic combination of starting powders via a ball-milling followed by calcination, J. Phys.: Conf. Ser., 2017, vol. 817, no. 1, p. 012033. https://doi.org/10.1088/1742-6596/817/1/01203310.1088/1742-6596/817/1/012033 ↗
20. Rendtorff, N.M., Garrido, L.B., and Aglietti, E.F., Effect of the addition of mullite–zirconia to the thermal shock behavior of zircon materials, Mater. Sci. Eng., A, 2008, vol. 498, nos. 1–2, pp. 208–215. https://doi.org/10.1016/j.msea.2008.08.03610.1016/j.msea.2008.08.036 ↗
21. Nakamori, F., Ohishi, Yu., Muta, H., Kurosaki, K., Fukumoto, K.-I., and Yamanaka, Sh., Mechanical and thermal properties of ZrSiO4, J. Nucl. Sci. Technol., 2017, vol. 54, no. 11, pp. 1267–1273. https://doi.org/10.1080/00223131.2017.135911710.1080/00223131.2017.1359117 ↗
22. Xiang, X., Fan, H., and Zhou, Ya., The lattice thermal conductivity of hafnia: The influence of high-order scatterings and phonon coherence, J. Appl. Phys., 2024, vol. 135, no. 12, p. 125102. https://doi.org/10.1063/5.019004710.1063/5.0190047 ↗
23. Li, Ch., Ma, Yu., Xue, Zh., Yang, Yo., Chen, J., and Guo, H., Effect of Y doping on microstructure and thermophysical properties of yttria stabilized hafnia ceramics, Ceram. Int., 2018, vol. 44, no. 15, pp. 18213–18221. https://doi.org/10.1016/j.ceramint.2018.07.03010.1016/j.ceramint.2018.07.030 ↗
24. Chaubey, G.S., Yao, Yu., Makongo, J.P.A., Sahoo, P., Misra, D., Poudeu, P.F.P., and Wiley, J.B., Microstructural and thermal investigations of HfO2 nanoparticles, RSC Adv., 2012, vol. 2, no. 24, p. 9207. https://doi.org/10.1039/c2ra21003g10.1039/c2ra21003g ↗