Thermoelectric Multiphase Ceramics Based on Layered Calcium Cobaltite, as Synthesized Using Two-Stage Sintering
Source abstract
Abstract
Multiphase ceramics are synthesized based on layered calcium cobaltite with a different cobalt oxide content by solid state synthesis followed by two-stage sintering. The phase composition is established, and the microstructure, electrical conductivity, and thermal electromotive force are investigated. The effect that the cation and phase compositions of ceramics have on its carrier transport properties and thermoelectric properties is established. The highest value for the power factor P is observed for multiphase ceramics with the composition Ca3Co3.4O9 + δ (0.7Ca3Co4O9 + δ + 0.3Ca3Co2O6), which is 265 μW/(m K2) at a temperature of 1100 K. This value is 20% higher than that for the Ca3Co4O9 + δ sample (P1100 = 218 μW/(m K2)) and exceeds the power factor value for low-density Ca3Co4O9 + δ ceramics prepared by the conventional solid state synthesis by a factor of 2.65.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Phase Change Materials Research · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Oxide Thermoelectrics. Research Signpost, Koumoto, K., Terasaki, I., and Murayama, N., Eds., Trivandrum, India: Research Signpost, 2002.
2. Masset, A.C., Michel, C., and Maignan, A., Misfit-layered cobaltite with an anisotropic giant magnetoresistance: Ca3Co4O9, Phys. Rev. B, 2000, vol. 62, no. 1, pp. 166–175.10.1103/PhysRevB.62.166 ↗
3. Tahashi, M., Tanimoto, T., Goto, H., Takahashi, M., and Ido, T., Sintering temperature dependence of thermoelectric performance and crystal phase of calcium cobalt oxide, J. Am. Ceram. Soc., 2010, vol. 93, no. 10, pp. 3046–3048.10.1111/j.1551-2916.2010.04026.x ↗
4. Tahashi, M., Takahashi, M., and Goto, H., Thermoelectric performance and crystal phase of calcium cobalt oxides sintered in oxygen gas, J. Am. Ceram. Soc., 2018, vol. 101, no. 4, pp. 1402–1406.10.1111/jace.15349 ↗
5. Woermann, E. and Muan, A., Phase equilibria in the system CaO-cobalt oxide in air, J. Inorg. Nucl. Chem., 1970, vol. 32, pp. 1455–1459.10.1016/0022-1902(70)80631-5 ↗
6. Sedmidubsky, D., Jakes, V., Jankovsky, O., Leitner, J., Sofer, Z., and Hejtmanek, J., Phase equilibria in Ca–Co–O system, J. Solid State Chem., 2012, vol. 194, pp. 199–205.10.1016/j.jssc.2012.05.014 ↗
7. Matsukevich, I.V. and Klyndyuk, A.I., Preparation of layered calcium cobaltite Ca3Co4O9 + δ by solution methods and its properties, Ukr. Khim. Zh., 2013, vol. 12, pp. 104–110.
8. Katsuyama, S., Takiguchi, Y., and Ito, M., Synthesis of Ca3Co4O9 ceramics by polymerized complex and hydrothermal hot-pressing processes and the investigation of its thermoelectric properties, J. Mater. Sci., 2008, vol. 43, pp. 3553–3559.10.1007/s10853-008-2561-x ↗
9. Klyndyuk, A.I., Matsukevich, I.V., Janek, M., Chizhova, E.A., Lenčéš, Z., Hanzel, O., and Veteška, P., Thermoelectric properties of phase inhomogeneous ceramics based on the Ca3Co4O9 + δ, obtained by means of hot-pressing method, Russ. J. Appl. Chem., 2020, vol. 93, no. 8, pp. 1126–1131.10.1134/S1070427220080030 ↗
10. Zhang, Y. and Zhang, J., Rapid reactive synthesis and sintering of textured Ca3Co4O9 ceramics by spark plasma sintering, J. Mater. Process. Technol., 2008, vol. 208, pp. 70–74.10.1016/j.jmatprotec.2007.12.093 ↗
11. Wu, N.Y., Holgate, T.C., Nong, N.V., Pryds, N., and Linderoth, S., High temperature thermoelectric properties of Ca3Co4O9 + δ by auto-combustion synthesis and spark plasma sintering, J. Eur. Ceram. Soc., 2014, vol. 34, pp. 925–931.10.1016/j.jeurceramsoc.2013.10.022 ↗
12. Królicka, A.K., Piersa, M., Mirowska, A., and Michalska, M., Effect of sol-gel and solid-state synthesis techniques on structural, morphological and thermoelectric performance of Ca3Co4O9, Ceram. Int., 2018, vol. 44, no. 12, pp. 13736–13743.10.1016/j.ceramint.2018.04.215 ↗
13. Kanas, N., Singh, S.P., Rotan, M., Saleemi, M., Bittner, M., Feldhoff, A., Norby, T., Wiik, K., Grande, T., and Einarsrud, M.-A., Influence of processing on stability, microstructure and thermoelectric properties of Ca3Co4 – xO9 + δ, J. Eur. Ceram. Soc., 2018, vol. 38, no. 4, pp. 1592–1599.10.1016/j.jeurceramsoc.2017.11.011 ↗
14. Madre, M.A., Costa, F.M., Ferreira, N.M., Sotelo, A., Torres, M.A., Constantinescu, G., Rasekh, Sh., and Diez, J.C., Preparation of high-performance Ca3Co4O9 thermoelectric ceramics produced by a new two-step method, J. Eur. Ceram. Soc., 2013, vol. 33, pp. 1747–1754.10.1016/j.jeurceramsoc.2013.01.029 ↗
15. Kang, M.-G., Cho, K.-H., Kim, J.-S., Nahm, S., Yoon, S.-J., and Kang, C.-Y., Post-calcination, a novel method to synthesize cobalt oxide-based thermoelectric materials, Acta Mater., 2014, vol. 73, pp. 251–258.10.1016/j.actamat.2014.04.008 ↗
16. Schulz, T. and Töpfer, J., Thermoelectric properties of Ca3Co4O9 ceramics prepared by an alternative pressure-less sintering/annealing method, J. Alloys Compd., 2016, vol. 659, pp. 122–126.10.1016/j.jallcom.2015.11.001 ↗
17. Shi, Z., Xu, J., Zhu, J., Zhang, R., Qin, M., Lou, Z., Gao, T., Reece, M., and Gao, F., High thermoelectric performance of Ca3Co4O9 ceramics with duplex structure fabricated via two-step pressureless sintering, J. Mater. Sci.: Mater. Electron., 2020, vol. 31, pp. 2938–2948.
18. Constantinescu, G., Sarabando, A.R., Rasekh, Sh., Lopes, D., Sergiienko, S., Amirkhizi, P., Frade, J.R., and Kovalevsky, A.V., Redox-promoted tailoring of the high-temperature electrical performance in Ca3Co4O9 thermoelectric materials by metallic cobalt addition, Materials, 2020, vol. 13, p. 1060.10.3390/ma13051060 ↗
19. Delorme, F., Diaz-Chao, P., Guilmeau, E., and Giovannelli, F., Thermoelectric properties of Ca3Co4O9–Co3O4 composites, Ceram. Int., 2015, vol. 41, no. 8, pp. 10038–10043.10.1016/j.ceramint.2015.04.091 ↗
20. Jankowski, O., Huber, S., Sedmidubsky, D., Nadherny, L., Hlasek, T., and Sofer, Z., Towards highly efficient thermoelectric: Ca3Co4O9 + δ–nCaZrO3 composite, Ceram.-Silikaty, 2014, vol. 58, no. 2, pp. 106–110.
21. Gupta, R.K., Sharma, R., Mahapatro, A.K., and Tandon, R.P., The effect of ZrO2 dispersion on the thermoelectric power factor of Ca3Co4O9, Phys. B (Amsterdam, Neth.), 2016, vol. 483, pp. 48–53.
22. Zhou, X.D., Pederson, L.R., Thomsen, E., Nie, Z., and Coffey, G., Nonstoichiometry and transport properties of Ca3Co4 ± xO9 + δ (x = 0–0.4), Electrochem. Solid-State Lett., 2009, vol. 12, no. 2, pp. F1–F3.10.1149/1.3039948 ↗
23. Matsukevich, I.V., Klyndyuk, A.I., Tugova, E.A., Tomkovich, M.V., Krasutskaya, N.S., and Gusarov, V.V., Synthesis and properties of materials based on layered calcium and bismuth cobaltites, Russ. J. Appl. Chem., 2015, vol. 88, no. 8, pp. 1241–1247.10.1134/S1070427215080030 ↗
24. Klyndyuk, A.I., Krasutskaya, N.S., Matsukevich, I.V., Tugova, E.A., and Chizhova, E.A., Phase equilibria in the BiO1.5–CaO–CoOy system, Russ. J. Gen. Chem., 2018, vol. 88, no. 6, pp. 1063–1065.10.1134/S1070363218060014 ↗
25. Klyndyuk, A.I., Krasutskaya, N.S., and Chizhova, E.A., Synthesis and thermoelectric properties of ceramics based on Bi2Ca2Co1.7Oy oxide, Glass Phys. Chem., 2018, vol. 44, no. 2, pp. 100–107.10.1134/S1087659618020086 ↗
26. Lu, D., Chen, G., Pei, J., Yang, X., and Xian, H., Effect of erbium substitution on thermoelectric properties of complex oxide Ca3Co2O6 at high temperatures, J. Rare Earths, 2008, vol. 26, no. 2, pp. 168–172.10.1016/S1002-0721(08)60059-9 ↗
27. Lin, Y.-H., Lan, J., Shen, Z., Liu, Y., Nan, C.-W., and Li, J.-F., High-temperature electrical transport behaviors in textured Ca3Co4O9-based polycrystalline ceramics, Appl. Phys. Lett., 2009, vol. 94, p. 072107.10.1063/1.3086875 ↗