journal article·2026-02Open access

Image brightness analysis as a tool for strain measurement in photo-elastic compression tests on PDMS granulate

Danuta Leśniewska, Justyna Sławińska-Budzich, Barbara Świtała, Muzafar Ali Kalwar, Magdalena Pietrzak

Granular Matter· Volume 28· Issue 1

Abstract

Abstract The paper presents the behaviour of samples made of self-manufactured polydimethylsiloxane (PDMS) grains in a photo-elastic confined uniaxial compression test. PDMS particles were produced using the water-based method, resulting in grain shapes that are close to spherical, with diameters ranging from 2.0 to 16.0 mm. The samples tested were of the same size; however, they consisted of grains of different fractions, diameter spans, and aspect ratios relative to the dimensions of the test box. They were subjected to a load-unload cycle according to several scenarios, first to determine the load that induces a measurable photo-elastic effect. To study the potential relationship between the uniaxial strain calculated based on the change in a sample’s height and the corresponding optical parameters, a parallel analysis was conducted using the average image brightness. It led to the proposal of standardised strain and brightness parameters, which reduced the influence of loading scenarios and camera settings on the test results, allowing for the study of the other factors. On this basis, a unique relationship has been found between normalised uniaxial strain and normalised relative average image brightness, encompassing both loading and unloading regimes. In contrast, two calibration curves are required to calculate stress from brightness. The most interesting finding is that, despite the different force network structures observed in the uniaxial compression test, they do not appear to affect the behaviour of the granular samples on a macro-scale. Graphical abstract
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Optical measurement and interference techniques · Soft Robotics and Applications · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Dantu, P.: Contribution a l’etiudemecanique et geometrique des milieuxpulverulents. In: Publications, B.S. (ed.) Proceedings of the 4th International Conference on Soil Mechanics and Foundation Engineering, London, pp. 144–148 (1957)
2. Drescher, A.: An experimental investigation of flow rules for granular materials using optically sensitive glass particles. Géotechnique 26(4), 591–601 (1976). https://doi.org/10.1680/geot.1976.26.4.59110.1680/geot.1976.26.4.591 ↗
3. Dyer, M.: Observation of the stress distribution in crushed glass with applications to soil reinforcement. PhD thesis, University of Oxford (1985)
4. Allersma, H.: Optical analysis of stress and strain in photoelastic particle assemblies. PhD thesis, Delft University of Technology (1987)
5. Roux, J.N., Chevoir, F.: Discrete numerical simulation and the mechanical behaviour of granular materials. Bullet.des Laboratoires des Ponts et Chaussees 254, 109–138 (2005)
6. Daniels, K.E.: The role of force networks in granular materials. In: EPJ Web of Conferences, vol. 140, p. 01006 (2017). https://doi.org/10.1051/epjconf/201714001006 . EDP Sciences10.1051/epjconf/201714001006 ↗
7. Abed Zadeh, A., Barés, J., Brzinski, T.A., Daniels, K.E., Dijksman, J., Docquier, N., Everitt, H.O., Kollmer, J.E., Lantsoght, O., Wang, D., et al.: Enlightening force chains: a review of photoelasticimetry in granular matter. Granul. Matter 21, 1–12 (2019). https://doi.org/10.1007/s10035-019-0942-210.1007/s10035-019-0942-2 ↗
8. Fischer, D., Stannarius, R., Tell, K., Yu, P., Sperl, M.: Force chains in crystalline and frustrated packing visualized by stress-birefringent spheres. Soft Matter 17(16), 4317–4327 (2021). https://doi.org/10.1039/D0SM02048F10.1039/D0SM02048F ↗
9. Wensrich, C., Kisi, E., Luzin, V., Rawson, A., Kirstein, O.: Evolution of a contact force network in a 2d granular assembly: an examination using neutron diffraction. Granul. Matter 23, 70 (2021). https://doi.org/10.1007/s10035-021-01135-010.1007/s10035-021-01135-0 ↗
10. Antony, S.J.: Power of photo-stress analysis in unravelling the mechanics of granular materials and its applications in interdisciplinary research. Opt. Lasers Eng. 183, 108512 (2024). https://doi.org/10.1016/j.optlaseng.2024.10851210.1016/j.optlaseng.2024.108512 ↗
11. Li, W., Juanes, R.: Dynamic imaging of force chains in 3d granular media. Proc. Natl. Acad. Sci. 121(14), 2319160121 (2024). https://doi.org/10.1073/pnas.231916012110.1073/pnas.2319160121 ↗
12. Leśniewska, D., Wood, D.M.: Observations of stresses and strains in a granular material. J. Eng. Mech. 135(9), 1038–1054 (2009). https://doi.org/10.1061/(ASCE)EM.1943-7889.000001510.1061/(ASCE)EM.1943-7889.0000015 ↗
13. Leśniewska, D., Muir Wood, D.: Photoelastic and photographic study of a granular material. Geotechnique 61(7), 605–611 (2011). https://doi.org/10.1680/geot.8.T.01710.1680/geot.8.T.017 ↗
14. Muir Wood, D., Leśniewska, D.: Stresses in granular materials. Granul. Matter 13, 395–415 (2011). https://doi.org/10.1007/s10035-010-0237-010.1007/s10035-010-0237-0 ↗
15. Leśniewska, D., Nitka, M., Tejchman, J., Pietrzak, M.: Contact force network evolution in active earth pressure state of granular materials: photo-elastic tests and DEM. Granul. Matter 22(71) (2020) https://doi.org/10.1007/s10035-020-01033-x10.1007/s10035-020-01033-x ↗
16. Abed Zadeh, A., Barés, J., Brzinski, T.A., Daniels, K.E., Dijksman, J., Docquier, N., Everitt, H.O., Kollmer, J.E., Lantsoght, O., Wang, D., et al.: Enlightening force chains: a review of photoelasticimetry in granular matter. Granul. Matter 21(4), 83 (2019). https://doi.org/10.1007/s10035-019-0942-210.1007/s10035-019-0942-2 ↗
17. Drescher, A., De Jong, G.D.J.: Photoelastic verification of a mechanical model for the flow of a granular material. Soil Mech. Transp. Porous Media Select. Works of G. de Josselin de Jong, 28–43 (2006) https://doi.org/10.1016/0022-5096(72)90029-410.1016/0022-5096(72)90029-4 ↗
18. Geng, J., Howell, D., Longhi, E., Behringer, R., Reydellet, G., Vanel, L., Clément, E., Luding, S.: Footprints in sand: the response of a granular material to local perturbations. Phys. Rev. Lett. 87(3), 035506 (2001). https://doi.org/10.1103/PhysRevLett.87.03550610.1103/PhysRevLett.87.035506 ↗
19. Howell, D., Behringer, R.P., Veje, C.: Stress fluctuations in a 2d granular couette experiment: a continuous transition. Phys. Rev. Lett. 82(26), 5241 (1999). https://doi.org/10.1103/PhysRevLett.82.524110.1103/PhysRevLett.82.5241 ↗
20. Geng, J., Reydellet, G., Clément, E., Behringer, R.: Green’s function measurements of force transmission in 2d granular materials. Phys. D 182(3–4), 274–303 (2003). https://doi.org/10.1016/S0167-2789(03)00137-410.1016/S0167-2789(03)00137-4 ↗
21. Majmudar, T.S., Behringer, R.P.: Contact force measurements and stress-induced anisotropy in granular materials. Nature 435(7045), 1079–1082 (2005). https://doi.org/10.1038/nature0380510.1038/nature03805 ↗
22. Aben, H.: Integrated Photoelasticity. McGraw-Hill International Book Company, London (1979). https://doi.org/10.1002/zamm.1981061102610.1002/zamm.19810611026 ↗
23. Aben, H., Guillement, C.: Photoelasticity of Glass. Springer, Berlin (1992)
24. Heywood, R.: Designing by Photoelasticity. Chapman Hall, London (1952)
25. Frocht, M.: Photoelasticity, vol. 2. Wiley, New York (1948)
26. Ramesh, K.: Transmission photoelasticity. In: Digital Photoelasticity: Advanced Techniques and Applications, pp. 1–46. Springer, Berlin (2000). https://doi.org/10.1007/978-3-642-59723-7_110.1007/978-3-642-59723-7_1 ↗
27. Amon, A., Born, P., Daniels, K.E., Dijksman, J.A., Huang, K., Parker, D., Schröter, M., Stannarius, R., Wierschem, A.: Preface: Focus on imaging methods in granular physics. Review of Scientific Instruments 88(5) (2017)https://doi.org/10.1063/1.498305210.1063/1.4983052 ↗
28. Russell, A.R., Wood, D.M.: Point load tests and strength measurements for brittle spheres. Int. J. Rock Mech. Min. Sci. 46(2), 272–280 (2009). https://doi.org/10.1016/j.ijrmms.2008.04.00410.1016/j.ijrmms.2008.04.004 ↗
29. Dijksman, J.A., Brodu, N., Behringer, R.P.: Refractive index matched scanning and detection of soft particles. Review of Scientific Instruments 88(5) (2017) https://doi.org/10.1063/1.498304710.1063/1.4983047 ↗
30. Daniels, K.E., Kollmer, J.E., Puckett, J.G.: Photoelastic force measurements in granular materials. Review of Scientific Instruments 88(5) (2017) https://doi.org/10.1063/1.498304910.1063/1.4983049 ↗
31. Leśniewska, D., Radosz, I., Pietrzak, M.: Photo-elastic observation of loading and crushing of a single grain. In: Micro to MACRO Mathematical Modelling in Soil Mechanics, pp. 213–223 (2019). Springer10.1007/978-3-319-99474-1_22 ↗
32. Carrillo, F., Gupta, S., Balooch, M., Marshall, S.J., Marshall, G.W., Pruitt, L., Puttlitz, C.M.: Nanoindentation of polydimethylsiloxane elastomers: effect of crosslinking, work of adhesion, and fluid environment on elastic modulus. J. Mater. Res. 20(10), 2820–2830 (2005). https://doi.org/10.1557/JMR.2005.035410.1557/JMR.2005.0354 ↗
33. Mata, A., Fleischman, A.J., Roy, S.: Characterization of polydimethylsiloxane (PDMS) properties for biomedical micro/nanosystems. Biomed. Microdev. 7(4), 281–293 (2005). https://doi.org/10.1007/s10544-005-6070-210.1007/s10544-005-6070-2 ↗
34. Khanafer, K., Duprey, A., Schlicht, M., Berguer, R.: Effects of strain rate, mixing ratio, and stress-strain definition on the mechanical behavior of the polydimethylsiloxane (pdms) material as related to its biological applications. Biomed. Microdev. 11(2), 503–508 (2009). https://doi.org/10.1007/s10544-008-9256-610.1007/s10544-008-9256-6 ↗
35. Le Rouzic, J., Delobelle, P., Vairac, P., Cretin, B.: Comparison of three different scales techniques for the dynamic mechanical characterization of two polymers (PDMS and su8). Eur. Phys. J. Appl. Phys. 48(1), 11201 (2009). https://doi.org/10.1051/epjap/200912410.1051/epjap/2009124 ↗
36. Liu, M., Sun, J., Sun, Y., Bock, C., Chen, Q.: Thickness-dependent mechanical properties of polydimethylsiloxane membranes. J. Micromech. Microeng. 19(3), 035028 (2009). https://doi.org/10.1088/0960-1317/19/3/03502810.1088/0960-1317/19/3/035028 ↗
37. Liu, M., Sun, J., Chen, Q.: Influences of heating temperature on mechanical properties of polydimethylsiloxane. Sens. Actuators A 151(1), 42–45 (2009). https://doi.org/10.1016/j.sna.2009.02.01610.1016/j.sna.2009.02.016 ↗
38. Schneider, F., Draheim, J., Kamberger, R., Wallrabe, U.: Process and material properties of polydimethylsiloxane (PDMS) for optical mems. Sens. Actuators A 151(2), 95–99 (2009). https://doi.org/10.1016/j.sna.2009.01.02610.1016/j.sna.2009.01.026 ↗
39. Kim, T.K., Kim, J.K., Jeong, O.C.: Measurement of nonlinear mechanical properties of PDMS elastomer. Microelectron. Eng. 88(8), 1982–1985 (2011). https://doi.org/10.1016/j.mee.2010.12.10810.1016/j.mee.2010.12.108 ↗
40. Seghir, R., Arscott, S.: Extended PDMS stiffness range for flexible systems. Sens. Actuators A 230, 33–39 (2015). https://doi.org/10.1016/j.sna.2015.04.01110.1016/j.sna.2015.04.011 ↗
41. Lee, W., Yeo, K., Andriyana, A., Shee, Y., Adikan, F.M.: Effect of cyclic compression and curing agent concentration on the stabilization of mechanical properties of PDMS elastomer. Mater. Des. 96, 470–475 (2016). https://doi.org/10.1016/j.matdes.2016.02.04910.1016/j.matdes.2016.02.049 ↗
42. Rubino, E., Ioppolo, T.: Young’s modulus and loss tangent measurement of polydimethylsiloxane using an optical lever. J. Polym. Sci. Part B Polym. Phys. 54(7), 747–751 (2016). https://doi.org/10.1002/polb.2397210.1002/polb.23972 ↗
43. Fitzgerald, M.L., Tsai, S., Bellan, L.M., Sappington, R., Xu, Y., Li, D.: The relationship between the young’s modulus and dry etching rate of polydimethylsiloxane (PDMS). Biomed. Microdev. 21(1), 26 (2019). https://doi.org/10.1007/s10544-019-0379-810.1007/s10544-019-0379-8 ↗
44. Kim, J.-H., Lee, J., Kim, W., Kim, J., Kang, S.-K., Kwon, D.: Characterization of viscoelastic behavior of poly (dimethylsiloxane) by nanoindentation. Korean J. Metals Mater. 57(5), 289–294 (2019). https://doi.org/10.3365/KJMM.2019.57.5.28910.3365/KJMM.2019.57.5.289 ↗
45. Zhang, G., Sun, Y., Qian, B., Gao, H., Zuo, D.: Experimental study on mechanical performance of polydimethylsiloxane (PDMS) at various temperatures. Polym. Test. 90, 106670 (2020). https://doi.org/10.1016/j.polymertesting.2020.10667010.1016/j.polymertesting.2020.106670 ↗
46. Cho, H.S., Moon, H.-Y., Lee, H.S., Kim, Y.T., Jeoung, S.C.: Formulation prediction for young’s modulus of poly (dimethylsiloxane) by spectroscopic methods. Bull. Korean Chem. Soc. 42(9), 1225–1231 (2021). https://doi.org/10.1002/bkcs.1235210.1002/bkcs.12352 ↗
47. Miranda, I., Souza, A., Sousa, P., Ribeiro, J., Castanheira, E.M., Lima, R., Minas, G.: Properties and applications of PDMS for biomedical engineering: A review. J. Funct. Biomater. 13(1), 2 (2021). https://doi.org/10.3390/jfb1301000210.3390/jfb13010002 ↗
48. Sales, F.C., Ariati, R.M., Noronha, V.T., Ribeiro, J.E.: Mechanical characterization of PDMS with different mixing ratios. Proced. Struct. Integr. 37, 383–388 (2022). https://doi.org/10.1016/j.prostr.2022.01.09910.1016/j.prostr.2022.01.099 ↗
49. Frank-Richter, S.: Disordered binary granular packings in three dimensions. PhD thesis, PhD thesis, Heinrich-Heine-Universität, Düsseldorf (2014)
50. Tsai, J.-C., Huang, G.-H., Tsai, C.-E.: Signature of transition between granular solid and fluid: rate-dependent stick slips in steady shearing. Phys. Rev. Lett. 126(12), 128001 (2021). https://doi.org/10.1103/PhysRevLett.126.12800110.1103/PhysRevLett.126.128001 ↗
51. Rosenthal, A.J.: Contact stresses in gelatin spheres under compressive die loading. J. Text. Stud. 47(6), 457–460 (2016). https://doi.org/10.1111/jtxs.1219610.1111/jtxs.12196 ↗
52. Mirbagheri, S.A., Ceniceros, E., Jabbarzadeh, M., McCormick, Z., Fu, H.C.: Sensitively photoelastic biocompatible gelatin spheres for investigation of locomotion in granular media. Exp. Mech. 55(2), 427–438 (2015). https://doi.org/10.1007/s11340-014-9958-z10.1007/s11340-014-9958-z ↗
53. Hopf, R., Bernardi, L., Menze, J., Zündel, M., Mazza, E., Ehret, A.E.: Experimental and theoretical analyses of the age-dependent large-strain behavior of sylgard 184 (10: 1) silicone elastomer. J. Mech. Behav. Biomed. Mater. 60, 425–437 (2016). https://doi.org/10.1016/j.jmbbm.2016.02.02210.1016/j.jmbbm.2016.02.022 ↗
54. Moučka, R., Sedlačík, M., Osička, J., Pata, V.: Mechanical properties of bulk sylgard 184 and its extension with silicone oil. Sci. Rep. 11(1), 19090 (2021). https://doi.org/10.1038/s41598-021-98694-210.1038/s41598-021-98694-2 ↗
55. DaVis11 DaVis Version 11.0 [Computer Software], LaVision GmbH, Göttingen (2023). https://www.lavision.de/en/products/davis-software/
56. Sławińska-Budzich, J., Świtała, B.: Experimental and numerical study of stick-slip phenomenon in granular materials. Sci. Rep. 15(1), 28157 (2025). https://doi.org/10.1038/s41598-025-13859-710.1038/s41598-025-13859-7 ↗
57. Sławińska-Budzich, J.: Characteristic parameters of soil failure criteria for plane strain conditions–experimental and semi-theoretical study. Stud. Geotech. Mech.43(3) (2021) https://doi.org/10.2478/sgem-2021-001510.2478/sgem-2021-0015 ↗
58. Sławińska-Budzich, J., Świtała, B., Leśniewska, D., Kalwar, M.: Characterisation of pdms granulate in geotechnical model tests. In: IOP Conference Series: Earth and Environmental Science, vol. 1480, p. 012005 (2025). https://doi.org/10.1088/1755-1315/1480/1/012005 . IOP Publishing10.1088/1755-1315/1480/1/012005 ↗
59. Terzaghi, K., Peck, R.B., Mesri, G.: Soil Mechanics in Engineering Practice. John wiley & sons, New York (1996)
60. Mitchell, J.K., Soga, K.: Fundamentals of Soil Behavior, 3rd edn. John Wiley & Sons, New York (2005)
61. Lambe, T.W., Whitman, R.V.: Soil Mechanics SI Version. John Wiley & Sons, New York (2008)
62. Cantor, D., Ovalle, C.: Sample size effects on the critical state shear strength of granular materials with varied gradation and the role of column-like local structures. Géotechnique 75(1), 29–40 (2023). https://doi.org/10.1680/jgeot.23.0003210.1680/jgeot.23.00032 ↗