DEM and experimental study of bi-directional simple shear
Source abstract
Abstract
Stress–strain responses of granular material under bi-directional simple shear are comprehensively studied experimentally and numerically. The variable direction dynamic cyclic simple shear apparatus is used to test glass beads under various loading paths, and the DEM is used to reproduce experimental results. These two methods are complementary to each other. The glass beads are subject to the first shearing until a specified shear strain is reached, followed by the second shearing until the failure of samples, and the two shears are at various angles. The experimental results are in good agreement with the numerical results. Both experimental and numerical studies indicate that the development of shear stresses is dependent on the angle between the two shears in the early stage, and they approach the same ultimate values at the failure. The lateral stress, principal stress and non-coaxiality are also studied in the DEM simulation. While the lateral stress and principal stress are dependent on the angle, the orientations of principal stresses and plastic strain rate almost reach the same value at the failure. The contact force network and material fabric are also investigated to provide insight into the micro-scale responses and macro–micro relations regarding bi-directional simple shear.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Landslides and related hazards · Granular flow and fluidized beds · Geotechnical Engineering and Soil Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Adhikari, S., You, Z.P.: 3D discrete element models of the hollow cylindrical asphalt concrete specimens subject to the internal pressure. Int. J. Pavement Eng. 11(5), 429–439 (2010). https://doi.org/10.1080/10298436.2010.48911410.1080/10298436.2010.489114 ↗
2. Ai, J., Langston, P.A., Yu, H.-S.: Discrete element modelling of material non-coaxiality in simple shear flows. Int. J. Numer. Anal. Methods Geomech. 38(6), 615–635 (2014). https://doi.org/10.1002/nag.223010.1002/nag.2230 ↗
3. Asadzadeh, M., Soroush, A.: Fundamental investigation of constant stress simple shear test using DEM. Powder Technol. 292, 129–139 (2016). https://doi.org/10.1016/j.powtec.2016.01.02910.1016/j.powtec.2016.01.029 ↗
4. Barreto, D., O’Sullivan, C., Zdravkovic, L., Nakagawa, M., Luding, S.: Quantifying the evolution of soil fabric under different stress paths. Powders Grains 1145(1), 181–184 (2009). https://doi.org/10.1063/1.317988110.1063/1.3179881 ↗
5. Bjerrum, L., Landva, A.: Direct simple-shear tests on a norwegian quick clay. Géotechnique 16(1), 1–20 (1966). https://doi.org/10.1680/geot.1966.16.1.110.1680/geot.1966.16.1.1 ↗
6. Budhu, M.: Nonuniformities imposed by simple shear apparatus. Can. Geotech. J. 21(1), 125–137 (1984). https://doi.org/10.1139/t84-01010.1139/t84-010 ↗
7. Budhu, M.: Lateral stresses observed in two simple shear apparatus. J. Geotech. Eng. 111(6), 698–711 (1985). https://doi.org/10.1061/(ASCE)0733-9410(1985)111:6(698)10.1061/(ASCE)0733-9410(1985)111:6(698) ↗
8. Christoffersen, J., Mehrabadi, M.M., Nematnasser, S.: A micromechanical description of granular material behavior. J. Appl. Mech. 48(2), 339–344 (1981). https://doi.org/10.1115/1.315761910.1115/1.3157619 ↗
9. Cundall, P.A., Strack, O.D.L.: A discrete numerical model for granular assemblies. Géotechnique 29(1), 47–65 (1979). https://doi.org/10.1680/geot.1979.29.1.4710.1680/geot.1979.29.1.47 ↗
10. Coetzee, C.J.: Review: calibration of the discrete element method. Powder Technol. 310, 104–142 (2017). https://doi.org/10.1016/j.powtec.2017.01.01510.1016/j.powtec.2017.01.015 ↗
11. Dabeet, A., Wijewickreme, D., Byrne, P.: Evaluation of stress strain non-uniformities in the laboratory direct simple shear test specimens using 3D discrete element analysis. Geomech. Geoeng. 10(4), 249–260 (2015). https://doi.org/10.1080/17486025.2014.97988910.1080/17486025.2014.979889 ↗
12. Farhang, B., Mirghasemi, A.A.: A study of principle stress rotation on granular soils using DEM simulation of hollow cylinder test. Adv. Powder Technol. 28(9), 2052–2064 (2017). https://doi.org/10.1016/j.apt.2017.05.01110.1016/j.apt.2017.05.011 ↗
13. Hight, D.W., Gens, A., Symes, M.J.: The development of a new hollow cylinder apparatus for investigating the effects of principal stress rotation in soils. Géotechnique 33(4), 355–383 (1983). https://doi.org/10.1680/geot.1983.33.4.35510.1680/geot.1983.33.4.355 ↗
14. Härtl, J., Ooi, J.Y.: Experiments and simulations of direct shear tests: porosity, contact friction and bulk friction. Granular Matter 10(4), 263–271 (2008). https://doi.org/10.1007/s10035-008-0085-310.1007/s10035-008-0085-3 ↗
15. Ishihara, K., Yamazaki, F.: Cyclic simple shear tests on saturated sand in multi-directional loading. Soils Found. 20(1), 45–59 (1980). https://doi.org/10.3208/sandf1972.20.4510.3208/sandf1972.20.45 ↗
16. Itasca Consulting Group Inc.: PFC (particle flow code in 2 and 3 dimensions), version 5.0 [User’s manual]. Minneapolis (2014)
17. Iwashita, K., Oda, M.: Rolling resistance at contacts in simulation of shear band development by DEM. J. Eng. Mech. 124(3), 285–292 (1998). https://doi.org/10.1061/(Asce)0733-9399(1998)124:3(285)10.1061/(Asce)0733-9399(1998)124:3(285) ↗
18. Jiang, M.J., Harris, D., Yu, H.S.: Kinematic models for non-coaxial granular materials. Part II: evaluation. Int. J. Numer. Anal. Methods Geomech. 29(7), 663–689 (2005). https://doi.org/10.1002/nag.43110.1002/nag.431 ↗
19. Kammerer, A.M., Pestana, J.M., Seed, R.B.: Undrained Response of Monterey 030 Sand Under Multidirectional Cyclic Simple Shear Loading Conditions. University of California, Berkeley (2002)
20. Li, Y., Yang, Y., Yu, H.S., Roberts, G.: Monotonic direct simple shear tests on sand under multidirectional loading. Int. J. Geomech. 17(1), 04016038 (2016). https://doi.org/10.1061/(asce)gm.1943-5622.000067310.1061/(asce)gm.1943-5622.0000673 ↗
21. Li, B., Chen, L., Gutierrez, M.: Influence of the intermediate principal stress and principal stress direction on the mechanical behavior of cohesionless soils using the discrete element method. Comput. Geotech. 86, 52–66 (2017). https://doi.org/10.1016/j.compgeo.2017.01.00410.1016/j.compgeo.2017.01.004 ↗
22. Ni, Q., Powrie, W., Zhang, X.: Effect of particle properties on soil behaviour: 3-D numerical modelling of shear box tests. Numer. Methods Geotech. Eng. 1, 58–70 (2000). https://doi.org/10.1061/40502(284)510.1061/40502(284)5 ↗
23. Oda, M., Konishi, J.: Rotation of principal stresses in granular material during simple shear. Soils Found. 14(4), 39–53 (1974). https://doi.org/10.3208/sandf1972.14.4_3910.3208/sandf1972.14.4_39 ↗
24. Oda, M., Konishi, J., Nemat-Nasser, S.: Some experimentally based fundamental results on the mechanical behaviour of granular materials. Géotechnique 30(4), 479–495 (1980). https://doi.org/10.1680/geot.1980.30.4.47910.1680/geot.1980.30.4.479 ↗
25. O’Sullivan, C., Cui, L., Bray, J.D.: Three-dimensional discrete element simulations of direct shear tests. Numer. Model. Micromech. Part. Methods 1, 373–382 (2004)
26. Roscoe, K.H.: An apparatus for the application to simple shear to soil samples. In: Proceedings of the 2nd International Conference on Soil Mechanics and Foundation Engineering, pp. 186–191 (1953)
27. Rudnicki, J.W., Rice, J.R.: Conditions for the localization of deformation in pressure-sensitive dilatant materials. J. Mech. Phys. Solids 23(6), 371–394 (1975). https://doi.org/10.1016/0022-5096(75)90001-010.1016/0022-5096(75)90001-0 ↗
28. Rutherford, C.: Development of a Multi-directional Direct Simple Shear Testing Device for Characterization of the Cyclic Shear Response of Marine Clays. Texas A&M University, College Station (2012)
29. Satake, M.: Fabric tensor in granular materials. In: IUTAM Conference on Deformation and Failure of Granular Materials, pp. 63–67 (1982)
30. Sassa, S., Sekiguchi, H.: Analysis of wave-induced liquefaction of sand beds. Géotechnique 51(2), 115–126 (2001). https://doi.org/10.1680/geot.51.2.115.4028810.1680/geot.51.2.115.40288 ↗
31. Spencer, A.J.M.: A theory of the kinematics of ideal soils under plane strain conditions. J. Mech. Phys. Solids 12(5), 337–351 (1964). https://doi.org/10.1016/0022-5096(64)90029-810.1016/0022-5096(64)90029-8 ↗
32. Shen, C.K., O’Sullivan, C., Jardine, R.J.: A micromechanical investigation of drained simple shear tests. In: Proceedings of the 5th International Symposium on Deformation Characteristics of Geomaterials, pp. 314–321 (2011)
33. Thornton, C., Zhang, L.: A numerical examination of shear banding and simple shear non-coaxial flow rules. Philos. Mag. 86(21–22), 3425–3452 (2006). https://doi.org/10.1080/1478643050019786810.1080/14786430500197868 ↗
34. Tordesillas, A., Walsh, D.C.S.: Incorporating rolling resistance and contact anisotropy in micromechanical models of granular media. Powder Technol. 124(1–2), 106–111 (2002). https://doi.org/10.1016/S0032-5910(01)00490-910.1016/S0032-5910(01)00490-9 ↗
35. Wang, Z., Yang, Y.M., Yu, H.S.: Effects of principal stress rotation on the wave-seabed interactions. Acta Geotech. 12(1), 97–106 (2017). https://doi.org/10.1007/s11440-016-0450-z10.1007/s11440-016-0450-z ↗
36. Yang, Y.M., Yu, H.S.: A non-coaxial critical state soil model and its application to simple shear simulations. Int. J. Numer. Anal. Methods Geomech. 30(13), 1369–1390 (2006). https://doi.org/10.1002/nag.53110.1002/nag.531 ↗
37. Yu, H.S., Yuan, X.: On a class of non-coaxial plasticity models for granular soils. Proc. R. Soc. Math. Phys. Eng. Sci. 2067, 725–748 (2006)10.1098/rspa.2005.1590 ↗
38. Zhou, Y.C., Xu, B.H., Yu, A.B., Zulli, P.: An experimental and numerical study of the angle of repose of coarse spheres. Powder Technol. 125(1), 45–54 (2002). https://doi.org/10.1016/S0032-5910(01)00520-410.1016/S0032-5910(01)00520-4 ↗