On the creep problem of soft-rigid interfaces: analysis of the normal contact behavior and application of creep models
Source abstract
Abstract
In this study, we examined at the grain-scale the normal contact behavior of rigid-soft interfaces via a series of micromechanical experiments, in which “rigid” refers to quartz particle and “soft” refers to polymeric granules composed of recycled rubber. Emphasis was placed on the influence of creep by quantifying the creep deformations at the composite interface subjected to long-term loading. The experimental data suggested that the creep behavior of the sand-rubber interface subjected to different normal loads is not deterministic and that there is a correlation between creep and elastic deformations. We also examined the applicability of available creep models to the specific creep problem and the parametric study highlighted the heterogenous features of the creep contact behavior of the sand-rubber samples, which is dependent on the elastic properties of the rubber and the irregular geometry of the contact area. The ground-truth dataset suggested the Burgers model is the most suitable contact model for the creep problem at the sand-rubber interface. The parameters of the Burgers model were also calibrated for further exploration of constitutive models to be used in discrete-based computer analyses. This modeling also provided fundamental insights to understand the physics of the problem.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Geotechnical Engineering and Soil Mechanics · Adhesion, Friction, and Surface Interactions · Geotechnical Engineering and Soil Stabilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Edil, T.B.: A review of mechanical and chemical properties of shredded tires and soil mixtures. ASCE Geotech. Spec. Publ. 127, 1–21 (2004)
2. ASTM: Standard practice for use of scrap tires in civil engineering applications. ASTM, D6270-98, West Conshohoken, Pa, USA (2008)
3. ASTM: Testing and specification of recycled materials for sustainable geotechnical construction: Journal of ASTM International. In: Edil, T. (ed.) Selected Technical Papers STP 1540 ASTM, West Conshohochen, Pa, USA (2012)
4. Ma, Y., Wang, S., Zhou, H., Hu, W., Polaczyk, P., Zhang, M., Huang, B.: Compatibility and rheological characterization of asphalt modified with recycled rubber-plastic blends. Const. Build. Mater. 270, 121416 (2021)
5. Irtiseva, K., Lapkovskis, V., Mironovs, V., Ozolins, J., Thakur, V.K., Goel, G., Baronins, J., Shishkin, A.: Towards next-generation sustainable composites made of recycled rubber, cenospheres, and biobinder. Polymers 13, 574 (2021)10.3390/polym13040574 ↗
6. Burak Irez, A., Bayraktar, E., Miskioglu, I.: Fracture toughness analysis of epoxy-recycled rubber-based composite reinforced with graphene nanoplatelets for structural applications in automotive and aeronautics. Polymers 12, 448 (2020)10.3390/polym12020448 ↗
7. Li, W., Kwok, C.Y., Sandeep, C.S., Senetakis, K.: Sand type effect on the behaviour of sand-granulated rubber mixtures: integrated study from micro- to macro-scales. Powder Technol. 342, 907–916 (2019)10.1016/j.powtec.2018.10.025 ↗
8. Li, W., Kwok, C.Y., Senetakis, K.: Effects of inclusion of granulated rubber tyres on the mechanical behaviour of a compressive sand. Can. Geotech. J. 57(5), 763–769 (2019)10.1139/cgj-2019-0112 ↗
9. Lopera Perez, J.C., Kwok, C.Y., Senetakis, K.: Micromechanical analyses of the effect of rubber size and content on sand-rubber mixtures at the critical state. Geotext. Geomembr. 45, 1–17 (2017)10.1016/j.geotexmem.2016.11.005 ↗
10. Feng, Z.Y., Sutter, K.G.: Dynamic properties of granulated rubber/sand mixtures. Geotech. Test. J. 23(3), 338–344 (2000)10.1520/GTJ11055J ↗
11. Senetakis, K., Anastasiadis, A., Pitilakis, K.: Dynamic properties of dry sand/rubber (SRM) and gravel/rubber (GRM) mixtures in a wide range of shearing strain amplitudes. Soil Dyn. Earthq. Eng. 33, 38–53 (2012)10.1016/j.soildyn.2011.10.003 ↗
12. Tsang, H.H.: Seismic isolation by rubber–soil mixtures for developing countries. Earthq. Eng. Struct. Dyn. 37(2), 283–303 (2008)10.1002/eqe.756 ↗
13. Zhang, C., Ali, A.: The advancement of seismic isolation and energy dissipation mechanisms based on friction. Soil Dyn. Earthq. Eng. 146, 106746 (2021)
14. Tsiavos, A., Alexander, N.A., Diambra, A., Ibraim, E., Vardanega, P.J., Gonzalez-Buelga, A., Sextos, A.: A sand-rubber deformable granular layer as a low-cost seismic isolation strategy in developing countries: experimental investigation. Soil Dyn. Earthq. Eng. 125, 105731 (2019)10.1016/j.soildyn.2019.105731 ↗
15. Rizvi, S.M.F., Wang, K., Jalal, F.E., Tu, Y.: Evaluation of open and filled (TDA and RSM) trenches efficacy on vibration screening caused by transient loads. Transp. Geotech. 35, 100770 (2022)
16. Wu, M., Tian, W., Liu, F., Yang, J.: Dynamic behavior of geocell-reinforced rubber sand mixtures under cyclic simple shear loading. Soil Dyn. Earthq. Eng. 164, 107595 (2023)
17. He, H., Senetakis, K., Coop, M.R.: An investigation of the effect of shearing velocity on the inter-particle behavior of granular and composite materials with a new micromechanical dynamic testing apparatus. Tribol. Int. 134, 252–263 (2019)10.1016/j.triboint.2019.02.002 ↗
18. Kwok, C.Y., Bolton, M.D.: DEM simulations of thermally activated creep in soils. Geotechnique 60(6), 425–433 (2010)10.1680/geot.2010.60.6.425 ↗
19. Taghizadeh, K., Steeb, H., Luding, S., Magnanimo, V.: Elastic waves in particulate glass-rubber mixtures. Proc. R. Soc. A 477(2249), 20200834 (2021)10.1098/rspa.2020.0834 ↗
20. Evans, T.M., Valdes, J.R.: The microstructure of particulate mixtures in one-dimensional compression: numerical studies. Granul. Matter 13, 657–669 (2010)10.1007/s10035-011-0278-z ↗
21. Valdes, J.R., Evans, T.M.: Sand–rubber mixtures: experiments and numerical simulations. Can. Geotech. J. 45(4), 588–595 (2008)10.1139/T08-002 ↗
22. Giannis, K., Schilde, C., Finke, J.H., et al.: Stress based multi-contact model for discrete-element simulations. Granul. Matter 23, 1–14 (2021)10.1007/s10035-020-01060-8 ↗
23. Taghizadeh, K., Steeb, H., Magnanimo, V., Luding, S.: Elastic waves in particulate glass-rubber mixture: experimental and numerical investigations/studies[C] EPJ web of conferences. EDP Sci. 140, 12019 (2017)
24. Cárdenas-Barrantes, M., Cantor, D., Barés, J., Renouf, M., Azéma, E.: Compaction of mixtures of rigid and highly deformable particles: a micromechanical model. Phys. Rev. E 102(3), 032904 (2020)10.1103/PhysRevE.102.032904 ↗
25. Zhang, J., Wang, X., Yin, Z.: DEM-based study on the mechanical behaviors of sand-rubber mixture in critical state. Const. Build. Mater. 370, 130603 (2023)
26. Kuhn, M.R., Mitchell, J.K.: New perspectives on soilcreep. ASCE J. Geotech. Eng. 119(3), 507–524 (1993)10.1061/(ASCE)0733-9410(1993)119:3(507) ↗
27. Wang, Y.H., Xu, D., Tsui, K.Y.: Discrete element modeling of contact creep and aging in sand. J. Geotech. Geoenviron. Eng. 134(9), 1407–1411 (2008)10.1061/(ASCE)1090-0241(2008)134:9(1407) ↗
28. Wang, Y.H., Lau, Y.M., Gao, Y.: Examining the mechanisms of sand creep using DEM simulations. Granul. Matter 16(5), 733–750 (2014)10.1007/s10035-014-0514-4 ↗
29. Zhang, Z., Wang, Y.H.: DEM modeling of aging or creep in sand based on the effects of microfracturing of asperities and evolution of microstructural anisotropy during triaxial creep. Acta Geotech. 11, 1303–1320 (2016)10.1007/s11440-016-0483-3 ↗
30. Wang, J., Xia, Z.: DEM study of creep and stress relaxation behaviors of dense sand. Comput. Geotech. 134, 104142 (2021)
31. Gao, Y., Chen, Q., Yuan, Q., Wang, Y.H.: The kinematics and micro mechanism of creep in sand based on DEM simulations. Comput. Geotech. 153, 105082 (2023)
32. Gao, Y., Wang, Y.H., Su, J.C.P.: Mechanisms of aging-induced modulus changes in sand under isotropic and anisotropic loading. J. Geotech. Geoenviron. Eng. 139(3), 470–482 (2013)10.1061/(ASCE)GT.1943-5606.0000772 ↗
33. Ma, G., Xie, Y., Long, G., Tang, Z., Zhou, X., Zeng, X., Li, J.: Mesoscale investigation on concrete creep behaviors based on discrete element method. Const. Build. Mater. 342, 127957 (2022)
34. Popov, V.L.: Contact Mechanics and Friction. Springer, Berlin (2010)10.1007/978-3-642-10803-7 ↗
35. Reddy, N.S.C., He, H., Senetakis, K.: DEM analysis of small and small-to-medium strain shear modulus of sands. Comput. Geotech. 141, 104518 (2022)
36. Tian, Y., Kasyap, S.S., Senetakis, K.: Influence of loading history and soil type on the normal contact behavior of natural sand grain-elastomer composite interfaces. Polymers 13(11), 1830 (2021)10.3390/polym13111830 ↗
37. Greenwood, J.A., Tripp, H.: The elastic contact of rough sphere. J. Appl. Mech. 34, 153–159 (1967)10.1115/1.3607616 ↗
38. Johnson, K.L.: Contact Mechanics. Cambridge University Press (1987)
39. Tian, Y., Senetakis, K.: On the contact problem of soft-rigid interfaces: incorporation of Mindlin-Deresiewicz and self-deformation concepts. Granul. Matter 24(1), 1–17 (2022)10.1007/s10035-021-01186-3 ↗
40. Senetakis, K., Coop, M.R.: The development of a new micro-mechanical inter-particle loading apparatus. Geotech. Test. J. 37(6), 1028–1039 (2014)10.1520/GTJ20120187 ↗
41. Imole, O.I., Paulick, M., Magnanimo, V., Morgeneyer, M., Chávez Montes, B.E., Ramaioli, M., Kwade, A., Luding, S.: Slow stress relaxation behavior of cohesive powders. Powder Technol. 293, 82–93 (2016)10.1016/j.powtec.2015.12.023 ↗
42. Kasyap, S.S., Senetakis, K.: Interface load-displacement behaviour of sand grains coated with clayey powder: experimental and analytical studies. Soils Found. 59(6), 1695–1710 (2019)10.1016/j.sandf.2019.07.010 ↗
43. Hertz, H.: Ueber die Berührung fester elastischer Körper. Journal für die reine und angewandte Mathematik 1882(92), 156–171 (1882)10.1515/crll.1882.92.156 ↗
44. Michalowski, R.L., Wang, Z., Nadukuru, S.S.: Maturing of contacts and ageing of silica sand. Géotechnique 68(2), 133–145 (2018)10.1680/jgeot.16.P.321 ↗
45. Sandeep, C.S., Senetakis, K.: Grain-scale mechanics of quartz sand under normal and tangential loading. Tribol. Int. 117, 261–271 (2018)10.1016/j.triboint.2017.09.014 ↗
46. Bower, A.F., Fleck, N.A., Needleman, A., Ogbonna, N.: Indentation of a power law creeping solid. Proc. R. Soc. A. 441(1911), 97–124 (1993)
47. Xia, Z., Shen, X., Ellyin, F.: Cyclic deformation behavior of an epoxy polymer. Part II: predictions of viscoelastic constitutive models. Polym. Eng. Sci. 45(1), 103–113 (2005)10.1002/pen.20235 ↗
48. Brot, C.C., Etsion, I., Kligerman, Y.: A contact model for a creeping sphere and a rigid flat. Wear 265(5–6), 598–605 (2008)10.1016/j.wear.2007.12.003 ↗
49. Yang, X.S., Zhai, H., Ruan, H., Shi, S., Zhang, T.: Multi-temperature indentation creep tests on nanotwinned copper. Int. J. Plast. 104, 68–79 (2018)10.1016/j.ijplas.2018.01.016 ↗
50. Tian, Y., Senetakis, K.: Influence of creep and sand type on the compression behavior of sand-rubber composites. Int. J. Geomech. 22(8), 04022116 (2022)10.1061/(ASCE)GM.1943-5622.0002491 ↗
51. Wu, M., Huang, R., Wang, J.: DEM simulations of cemented sands with a statistical representation of micro-bond parameters. Powder Technol. 379, 96–107 (2021)10.1016/j.powtec.2020.10.047 ↗
52. Nie, J., Cui, Y., Yang, Z., Yin, Y., Cao, Z., Li, D.: Effect of heterogeneity of particle properties on variability of laboratory sandy soil properties: a random discrete element perspective. Comput. Geotech. 141, 104497 (2022)
53. Liu, D., Lyu, M.: Uncertainty quantification for granular materials with a stochastic discrete element method. Comput. Geotech. 161, 105560 (2023)
54. Mitchell, J.K., Campanella, R.G., Singh, A.: Soil creep as a rate process. ASCE J. Soil Mech. Found. Div. 94(1), 231–253 (1968)10.1061/JSFEAQ.0001085 ↗
55. Merry, S.M., Bray, J.D.: Time-dependent mechanical response of HDPE geomembranes. J. Geotech. Geoenviron. Eng. 123(1), 57–65 (1997)10.1061/(ASCE)1090-0241(1997)123:1(57) ↗
56. Ngo, A.T., Valdes, J.R.: Creep of sand–rubber mixtures. J. Mater. Civil. Eng. 19(12), 1101–1105 (2007)10.1061/(ASCE)0899-1561(2007)19:12(1101) ↗
57. Su, C., Herbert, E.G., Sohn, S., LaManna, J.A., Liver, W.C., Pharr, G.M.: Measurement of power-law creep parameters by instrumented indentation methods. J. Mech. Phys. Sol. 61(2), 517–536 (2013)10.1016/j.jmps.2012.09.009 ↗
58. Itasca, M.: Particle flow code in three dimensions (PFC3D), Minneapolis (2014)
59. Zhang, Z., Yang, J., Friedrich, K.: Creep resistant polymeric nanocomposites. Polymer 45(10), 3481–3485 (2004)10.1016/j.polymer.2004.03.004 ↗
60. Sandström, R.: Basic model for primary and secondary creep in copper. Acta Mater. 60(1), 314–322 (2012)10.1016/j.actamat.2011.09.052 ↗