A theoretical study on the hydraulic conductivity of anisotropic granular materials by implementing the microstructure tensor
Source abstract
Abstract
A theoretical study on the hydraulic conductivity of fully saturated anisotropic granular materials for a 2D fluid flow has been made by making use of the microstructure tensor as the anisotropy descriptor. The assemblage of particles was assumed to be the representative elementary volume of materials with void spaces as a multiply-connected continuum through which a Stokesian flow can pass. The Navier–Stokes equations have been then solved to find the mean velocity vector under different pressure boundary conditions. A tensorial form of the hydraulic conductivity with constants being functions of the invariants of the microstructure tensor, as the geometric measure of the anisotropy, has been presented based on a number of realizations for different GSD curves. Verifications with available experimental data exhibit a reasonable accuracy of the suggested equation. Graphical abstract
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Granular flow and fluidized beds · Lattice Boltzmann Simulation Studies · Hydraulic Fracturing and Reservoir Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Alyamani, M.S., Sen, Z.: Determination of hydraulic conductivity from grain-size distribution curves. Ground Water 31(4), 551–555 (1993)10.1111/j.1745-6584.1993.tb00587.x ↗
2. Bouteldja, F., Breul, P., Boissier, D.: Experimental validation of a method for in situ estimation of hydraulic conductivity of water treatment granular materials. Geotech Geological Eng 29, 1009–1021 (2011). https://doi.org/10.1007/s10706-011-9433-x10.1007/s10706-011-9433-x ↗
3. Carman, P.C.: The determination of the specific surface of powders. J Soc Chem Ind 57, 225–234 (1938)
4. Carman, P.C.: Flow of gases through porous media. Butterworths Scientific Publications, London (1956)
5. Chapuis, R.P.: Predicting the saturated hydraulic conductivity of sand and gravel using effective diameter and void ratio. Can. Geotech. J. 41(5), 787–795 (2004). https://doi.org/10.1139/T04-02210.1139/T04-022 ↗
6. Chin, D.A.: Estimation of dispersion coefficients in porous media. J. Hydraul. Eng. ASCE 112(7), 591–609 (1986). https://doi.org/10.1061/(ASCE)0733-9429(1986)112:7(591)10.1061/(ASCE)0733-9429(1986)112:7(591) ↗
7. Churchill, R.V., Brown, J.W., Verhey, R.F.: Complex variables and applications. McGraw-Hill, New York (1974)
8. Craig, C.F.: Soil Mechanics, 4th edn. Taylor and Francis Group, London (1987)
9. Cushman, J.H.: On measurement, scale and scaling. Water Resour. Res. 22(2), 129–134 (1986). https://doi.org/10.1029/WR022i002p0012910.1029/WR022i002p00129 ↗
10. Darcy, H.: Les Fontaines Publiques de la Ville de Dijon. Dalmont, Paris (1856)
11. Das, B.M.: Advanced Soil Mechanics, 3rd edn. Taylor and Francis Group, London (1983)
12. Fattah, Q.N., Hoopes, J.A.: Dispersion in anisotropic, homogeneous, porous media. J. Hydraul. Eng. ASCE 111(5), 810–827 (1985). https://doi.org/10.1061/(ASCE)0733-9429(1985)111:5(810)10.1061/(ASCE)0733-9429(1985)111:5(810) ↗
13. Fujikura, Y.: Estimation of permeability for sand and gravel based on pore-size distribution model. J. Mater. Civ. Eng. ASCE (2019). https://doi.org/10.1061/(ASCE)MT.1943-5533.000294510.1061/(ASCE)MT.1943-5533.0002945 ↗
14. Gad-el-Hak, M.: The fluid mechanics of microdevices: the freeman scholar lecture. J. Fluids Eng. ASME 121(1), 5–33 (1999). https://doi.org/10.1115/1.282201310.1115/1.2822013 ↗
15. Ghabezloo, S., Sulem, J., Saint-Marc, J.: Evaluation of a permeability-porosity relationship in a low-permeability creeping material using a single transient test. Int. J. Rock Mech. Min. Sci. 46(4), 761–768 (2009). https://doi.org/10.1016/j.ijrmms.2008.10.00310.1016/j.ijrmms.2008.10.003 ↗
16. Gray, W.G., Miller, C.T.: A generalization of averaging theorems for porous medium analysis. Adv. Water Resour. 62(B), 227–237 (2013). https://doi.org/10.1016/j.advwatres.2013.06.00610.1016/j.advwatres.2013.06.006 ↗
17. Gurtin, M.E., Fried, E., Anand, L.: The Mechanics and Thermodynamics of Continua. Cambridge University Press, UK (2010)10.1017/CBO9780511762956 ↗
18. Hassanizadeh, M., Gray, W.G.: General conservation equations for multi-phase systems: 1. Averaging procedure. Adv. Water Resour. 2, 131–144 (1979). https://doi.org/10.1016/0309-1708(79)90025-310.1016/0309-1708(79)90025-3 ↗
19. Hazen, A.: Some physical properties of sands and gravels, with special reference to their use in filtration. In: 24th Annual Rep. Publication No. 34, Massachusetts State Board of Health, 539–556 (1892)
20. Hoffman, K., Kunze, R.: Linear Algebra, 2nd edn. Prentice-Hall, Englewood Cliffs (1971)
21. Hu, H., Braun, P., Delage, P., Ghabezloo, S.: Evaluation of anisotropic poroelastic properties and permeability of the opalinus clay using a single transient experiment. Acta Geotech. 16, 2131–2142 (2021). https://doi.org/10.1007/s11440-021-01147-310.1007/s11440-021-01147-3 ↗
22. Inglis, D., Pietruszczak, S.: Characterization of anisotropy in porous media by means of linear intercept measurements. Int. J. Solids Struct. 40(5), 1243–1264 (2003). https://doi.org/10.1016/S0020-7683(02)00595-410.1016/S0020-7683(02)00595-4 ↗
23. Jaafar, R., Likos, W.J.: Pore-scale model for estimating saturated and unsaturated hydraulic conductivity from grain size distribution. J. Geotech. Geoenviron. Eng. ASCE (2014). https://doi.org/10.1061/(ASCE)GT.1943-5606.000103110.1061/(ASCE)GT.1943-5606.0001031 ↗
24. Kanatani, K.: Distribution of directional data and fabric tensors. Int. J. Eng. Sci. 22(2), 149–164 (1984)10.1016/0020-7225(84)90090-9 ↗
25. Kedir, S.A.: Evaluation of hydraulic conductivity methods using laboratory, field and empirical equations: a case study in Mojo River Stream Bed. M.Sc., Addis Ababa Science and Technology University, Ethiopia, Thesis, (Supervisor: Argaw Asha) (2018)
26. Kenney, T.C., Lau, D., Ofoegbu, G.I.: Permeability of compacted granular materials. Can. Geotech. J. 21(4), 726–729 (1984)10.1139/t84-080 ↗
27. Kozeny, J.: Ueber kapillare Leitung Des Wassers Im Boden. Wien, Akad. Wiss. 136(2a), 271 (1927)
28. Kresic, N.: Quantitative Solutions in Hydrogeology and Groundwater Modeling. CRC Press, Boca Raton (1998)
29. Mishra, G.C., Siva Reddy, A.: Exit gradient in anisotropic porous medium. J. Hydraul. Eng. ASCE 109(6), 897–904. https://doi.org/10.1061/(ASCE)0733-9429(1983)109:6(897) (1983)10.1061/(ASCE)0733-9429(1983)109:6(897 ↗
30. Molaei, H., Veiskarami, M., Pietruszczak, S.: Localization of deformation in anisotropic granular materials utilizing the microstructure tensor’. Int. J. Geomech. ASCE 21(7), 55 (2021). https://doi.org/10.1061/(ASCE)GM.1943-5622.000201510.1061/(ASCE)GM.1943-5622.0002015 ↗
31. Moulton, L.K.: Highway Subdrainage Design. Federal Highway Administration Office of Research and Development, Washington, DC (1980)
32. Nemes, A., Schapp, M.G., Leij, F.J.: UNSODA Database Version 2.0. USDA Agricultural Research Service. Washington DC, USA (1999)
33. Neuman, S.P.: Theoretical derivation of Darcy’s law. Acta Mech. 25(3–4), 153–170 (1977). https://doi.org/10.1007/BF0137698910.1007/BF01376989 ↗
34. Oboudi, M.: Characterization of inherent and induced anisotropy in granular materials, Ph.D. Dissertation (Supervised by S. Pietruszczak and A. G. Razaqpur), McMaster University, Hamilton, ON, Canada (2014)
35. Oboudi, M., Pietruszczak, S., Razaqpur, A.G.: Description of inherent and induced anisotropy in granular media with particles of high sphericity. Int. J. Geomech. ASCE 16(4), 04016006 (2016). https://doi.org/10.1061/(ASCE)GM.1943-5622.000063510.1061/(ASCE)GM.1943-5622.0000635 ↗
36. Oda, M.: Initial fabrics and their relations to mechanical properties of granular material. Soils Found. 12(1), 18–36 (1972)10.3208/sandf1960.12.17 ↗
37. Oda, M.: The mechanism of fabric changes during compressional deformation of sand. Soils Found. 12(2), 1–18 (1972)10.3208/sandf1972.12.1 ↗
38. Oda, M.: Inherent and induced anisotropy in plasticity theory of granular soils. Mech. Mater. 16(1), 35–45 (1993)10.1016/0167-6636(93)90025-M ↗
39. Odong, J.: Evaluation of empirical formulae for determination of hydraulic conductivity based on grain-size analysis. J. Am. Sci. 3(3), 54–60 (2007)
40. Pietruszczak, S.: Fundamentals of Plasticity in Geomechanics. CRC Press, London (2010)
41. Pietruszczak, S., Krucinski, S.: Considerations on soil response to the rotation of principal stress directions. Comput. Geotech. 8(2), 89–110 (1989)10.1016/0266-352X(89)90059-1 ↗
42. Pietruszczak, S., Krucinski, S.: Description of anisotropic response of clays using a tensorial measure of structural disorder. Mech. Mater. 8(2), 237–249 (1989)10.1016/0167-6636(89)90014-8 ↗
43. Pietruszczak, S., Mróz, Z.: Formulation of anisotropic failure criteria incorporating a microstructure tensor. Comput. Geotech. 26(2), 105–112 (2000). https://doi.org/10.1016/S0266-352X(99)00034-810.1016/S0266-352X(99)00034-8 ↗
44. Pietruszczak, S., Mróz, Z.: On failure criteria for anisotropic cohesive-frictional materials. Int. J. Numer. Anal. Meth. Geomech. 25(5), 509–524 (2001). https://doi.org/10.1002/nag.14110.1002/nag.141 ↗
45. Pietruszczak, S., Oboudi, M.: Description of induced anisotropy in microstructure of granular soils. Soils Found. 57(4), 514–526 (2017). https://doi.org/10.1016/j.sandf.2017.06.00310.1016/j.sandf.2017.06.003 ↗
46. Qiu, Z.-F., Wang, J.-J.: Experimental study on the anisotropic hydraulic conductivity of a sandstone-mudstone particle mixture. J. Hydrol. Eng. ASCE (2015). https://doi.org/10.1061/(ASCE)HE.1943-5584.000122010.1061/(ASCE)HE.1943-5584.0001220 ↗
47. Ranaivomanana, H., Razakamanantsoa, A., Amiri, O.: Permeability prediction of soils including degree of compaction and microstructure. International Journal of Geomechanics, ASCE (2016). https://doi.org/10.1061/(ASCE)GM.1943-5622.000079210.1061/(ASCE)GM.1943-5622.0000792 ↗
48. Reddy, J.N.: An Introduction to the Finite Element Method, 2nd edn. McGraww Hill, New York, NY (1993)
49. Rivlin, R.S., Ericksen, J.I.: Stress-deformation for isotropic materials. J. Rat. Mech. Anal. 4, 323–425 (1955). https://doi.org/10.1007/978-1-4612-2416-7_6110.1007/978-1-4612-2416-7_61 ↗
50. Rosas, J., Lopez, O., Missimer, T.M., Coulibaly, K.M., Dehwah, A.H.A., Sesler, K., Lujan, L.R., Mantilla, D.: Determination of hydraulic conductivity from grain-size distribution for different depositional environments. Ground Water 52(3), 399–413 (2014). https://doi.org/10.1111/gwat.1207810.1111/gwat.12078 ↗
51. Saffman, P.G.: A theory of dispersion in a porous medium. J. Fluid Mech. 6(3), 321–349 (1959). https://doi.org/10.1017/S002211205900067210.1017/S0022112059000672 ↗
52. Slichter, C.S.: Theoretical Investigation of the Motion of Ground Waters. US. Geological Survey 19th Annual Rep., Part II, 295–384 (1898)
53. Truesdell, C.A., Noll, W.: The Nonlinear Field Theories of Mechanics. (Edited by Flügge). Springer, Berlin, Germany (1965)10.1007/978-3-642-46015-9_1 ↗
54. Veiskarami, M., Roshanali, L., Habibagahi, G.: Effect of particles shape on the hydraulic conductivity of Stokesian flow in granular materials. Geotech. Geol. Eng. (2022). https://doi.org/10.1007/s10706-022-02175-w10.1007/s10706-022-02175-w ↗
55. Vukovic, M., Soro, A.: Determination of Hydraulic Conductivity of Porous Media from Grain-Size Composition. Littleton, CO, US (1992)
56. Whitaker, S.: Flow in porous media I: a theoretical derivation of Darcy’s law. Transp. Porous Media 1(1), 3–25 (1986). https://doi.org/10.1007/BF0103652310.1007/BF01036523 ↗
57. Zienkiewicz, O.C., Taylor, R.L.: The Finite Element Method, 5th edn. Butterworth Heinemann, Oxford (2005)