journal article·2020-11Open access

Discrete element modelling of two-layered ballast in a box test

Huiqi Li, Glenn McDowell

Granular Matter· Volume 22· Issue 4

Abstract

Abstract It has been recently reported that ballast comprising differently graded layers helps to reduce track settlement. The main goal of this paper is to provide micro mechanical insight about how the differently layered ballasts reduce the settlement by employing DEM and thus propose an optimum design for two-layered ballast. The DEM simulations provide sufficient evidence that the two-layered ballast works by preventing particles from moving laterally through interlocking of the particles at the interface of the different layers in a similar way to geogrid. By plotting the lateral force acting on the side boundary as a function of the distance to the base, it is found that the walls in the region of 60–180 mm above the base always support the largest lateral forces and therefore this region might be the best location for an interface layer. However, considering the weak improvement in performance by increasing the thickness of the layer of scaled (small) ballast from 100 to 200 mm, it is suggested that it is best to use the sample comprising 100 mm scaled ballast on top of 200 mm standard ballast as the most cost effective solution.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Railway Engineering and Dynamics · Geotechnical Engineering and Underground Structures · Soil Mechanics and Vehicle Dynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Selig, E.T., Waters, J.M.: Track Geotechnology and Sub-structure Management. Thomas Telford, London (1994)10.1680/tgasm.20139 ↗
2. Cerasi, P., Mills, P.: Insights in erosion instabilities in nonconsolidated porous media. Phys. Rev. E. 58, 6051–6060 (1998)10.1103/PhysRevE.58.6051 ↗
3. Foster, M., Fell, R., Spannagle, M.: The statistics of embankment dam failures and accidents. Can. Geotech. J. 37, 1000–1024 (2000)10.1139/t00-030 ↗
4. Lobo-Guerrero, S., Vallejo, L.E.: Discrete element method analysis of railtrack ballast degradation during cyclic loading. Granul. Matter 8, 195–204 (2006)10.1007/s10035-006-0006-2 ↗
5. Walls, J.C., Galbreath, L.L.: Railroad ballast reinforcement using geogrids. Presented at the Proceeding of Geosynthetics, Orleans (1987)
6. Brown, S.F., Kwan, J., Thom, N.H.: Identifying the key parameters that influence geogrid reinforcement of railway ballast. Geotext. Geomembr. 25, 326–335 (2007)10.1016/j.geotexmem.2007.06.003 ↗
7. Tutumluer, E., Huang, H., Bian, X.: Geogrid-aggregate interlock mechanism investigated through aggregate imaging-based discrete element modeling approach. Int. J. Geomech. 12, 391–398 (2012)10.1061/(ASCE)GM.1943-5622.0000113 ↗
8. Indraratna, B., Hussaini, S.K.K., Vinod, J.S.: The lateral displacement response of geogrid-reinforced ballast under cyclic loading. Geotext. Geomembr. 39, 20–29 (2013)10.1016/j.geotexmem.2013.07.007 ↗
9. Safari Baghsorkhi, M., Laryea, S., McDowell, G., Thom, N.: An investigation of railway sleeper sections and under sleeper pads using a box test apparatus. Proc. Inst. Mech. Eng. Part F J. Rail Rapid Transit 230, 1722–1734 (2016)10.1177/0954409715613818 ↗
10. Li, H., McDowell, G.R.: Discrete element modelling of under sleeper pads using a box test. Granul. Matter 20, 26 (2018)10.1007/s10035-018-0795-0 ↗
11. Witt, S.: The influence of under sleeper pads on railway track dynamics. Independent thesis advanced level (Degree of Magister), Linköping University (2008)
12. Lakušić, S., Ahac, M., Haladin, I.: Experimental investigation of railway track with under sleeper pad. 10th Slovenian Road and Transportation Congress, 20–22 Octobre (2010).
13. Ajayi, O., Le Pen, L., Zervos, A., Powrie, W.: Scaling relationships for strip fibre–reinforced aggregates. Can. Geotech. J. 54, 710–719 (2017)10.1139/cgj-2016-0346 ↗
14. Ajayi, O., Le Pen, L., Zervos, A., Powrie, W.: A behavioural framework for fibre-reinforced gravel. Géotechnique 67, 56–68 (2017)10.1680/jgeot.16.P.023 ↗
15. Anderson, W.F., Key, A.J.: Model testing of two-layer railway track ballast. J. Geotech. Geoenviron. Eng. 126, 317–323 (2000)10.1061/(ASCE)1090-0241(2000)126:4(317) ↗
16. Key, A.J.: Behaviour of two layer railway track ballast under cyclic and monotonic loading. PhD thesis, University of Sheffield (1999)
17. Claisse, P., Keedwell, M., Calla, C.: Tests on a two-layered ballast system. Proc. Inst. Civ. Eng. Transp. 156, 93–101 (2003)
18. Claisse, P., Calla, C.: Rail ballast: conclusions from a historical perspective. Proc. Inst. Civ. Eng. Transp. 159, 69–74 (2006)
19. Abadi, T., Pen, L.L., Zervos, A., Powrie, W.: Improving the performance of railway tracks through ballast interventions. Proc. Inst. Mech. Eng. Part F J. Rail Rapid Transit 232, 337–355 (2016)10.1177/0954409716671545 ↗
20. Baghsorkhi, M.S.: Experimental investigation of the effect of the ballast/sleeper interventions on railway track performance (2016)
21. Cundall, P.A., Strack, O.D.L.: A discrete numerical model for granular assemblies. Géotechnique 29, 47–65 (1979)10.1680/geot.1979.29.1.47 ↗
22. Gao, L., Luo, Q., Xu, Y., Jing, G., Jiang, H.: Discrete element method of improved performance of railway ballast bed using elastic sleeper. J. Cent. South Univ. 22, 3223–3231 (2015)10.1007/s11771-015-2860-8 ↗
23. Qian, Y., Mishra, D., Tutumluer, E., Kazmee, H.A.: Characterization of geogrid reinforced ballast behavior at different levels of degradation through triaxial shear strength test and discrete element modeling. Geotext. Geomembr. 43, 393–402 (2015)10.1016/j.geotexmem.2015.04.012 ↗
24. Liu, S., Qiu, T., Qian, Y., Huang, H., Tutumluer, E., Shen, S.: Simulations of large-scale triaxial shear tests on ballast aggregates using sensing mechanism and real-time (SMART) computing. Comput. Geotech. 110, 184–198 (2019)10.1016/j.compgeo.2019.02.010 ↗
25. McDowell, G.R., Li, H.: Discrete element modelling of scaled railway ballast under triaxial conditions. Granul. Matter 18, 66 (2016)10.1007/s10035-016-0663-8 ↗
26. Harkness, J., Zervos, A., Le Pen, L., Aingaran, S., Powrie, W.: Discrete element simulation of railway ballast: modelling cell pressure effects in triaxial tests. Granul. Matter 18, 65 (2016)10.1007/s10035-016-0660-y ↗
27. Lu, M., McDOWELL, G.R.: Discrete element modelling of railway ballast under monotonic and cyclic triaxial loading. Géotechnique 60, 459–467 (2010)10.1680/geot.2010.60.6.459 ↗
28. Chen, C.: Discrete element modelling of geogrid-reinforced railway ballast and track transition zones (2013)
29. Chen, C., McDowell, G.R., Thom, N.H.: Discrete element modelling of cyclic loads of geogrid-reinforced ballast under confined and unconfined conditions. Geotext. Geomembr. 35, 76–86 (2012)10.1016/j.geotexmem.2012.07.004 ↗
30. Chen, C., Indraratna, B., McDowell, G., Rujikiatkamjorn, C.: Discrete element modelling of lateral displacement of a granular assembly under cyclic loading. Comput. Geotech. 69, 474–484 (2015)10.1016/j.compgeo.2015.06.006 ↗
31. Huang, H., Tutumluer, E.: Discrete element modeling for fouled railroad ballast. Constr. Build. Mater. 25, 3306–3312 (2011)10.1016/j.conbuildmat.2011.03.019 ↗
32. Tutumluer, E., Huang, H., Hashash, Y.M.A.: Discrete element modeling of railroad ballast settlement. In: AREMA Annual Conference (2007)
33. Mishra, D., Mahmud, S.M.N.: Effect of particle size and shape characteristics on ballast shear strength: a numerical study using the direct shear test. In: 2017 Joint Rail Conference. American Society of Mechanical Engineers (2017)10.1115/JRC2017-2322 ↗
34. Lobo-guerrero, S., Vallejo, L.E.: Discrete element method evaluation of granular crushing under direct shear test conditions. J. Geotech. Geoenviron. Eng. 131, 1295–1300 (2005)10.1061/(ASCE)1090-0241(2005)131:10(1295) ↗
35. Indraratna, B., Ngo, N.T., Rujikiatkamjorn, C., Vinod, J.S.: Behavior of fresh and fouled railway ballast subjected to direct shear testing: discrete element simulation. Int. J. Geomech. 14, 34–44 (2014)10.1061/(ASCE)GM.1943-5622.0000264 ↗
36. Wang, Z., Jing, G., Yu, Q., Yin, H.: Analysis of ballast direct shear tests by discrete element method under different normal stress. Measurement 63, 17–24 (2015)10.1016/j.measurement.2014.11.012 ↗
37. McDowell, G.R., Lim, W.L., Collop, A.C., Armitage, R., Thom, N.H.: Laboratory simulation of train loading and tamping on ballast. Proc. Inst. Civ. Eng. Transp. 158, 89–95 (2005)
38. Itasca: PFC3D v5.0-User Manual, Minneapolis (2015)
39. Li, H., McDowell, G., Lowndes, I.: Discrete-element modelling of rock communition in a cone crusher using a bonded particle model. Géotech. Lett. 4, 79–82 (2014)10.1680/geolett.14.00006 ↗
40. Li, H., McDowell, G., Lowndes, I.: Discrete element modelling of a rock cone crusher. Powder Technol. 263, 151–158 (2014)10.1016/j.powtec.2014.05.004 ↗
41. Taghavi, R.: Automatic clump generation based on mid- surface. In: Presented at the 2nd International FLAC/DEM Symposium (2011)
42. Oh, J.: Parametric study on geogrid-reinforced track substructure. Int. J. Railw. 6, 59–63 (2013)10.7782/IJR.2013.6.2.059 ↗
43. Bathurst, R.: Geogrid Reinforcement of Ballasted Track. Transportation Research Journal of the Transportation Record Research Board, Washington, DC (1987)
44. Tensar: Railways: Mechanical Stabilisation of Track Ballast and Sub-ballast. Tensar International Limited, Blackburn (2013)