journal article·2022-08Open access

DEM simulations of agglomerates impact breakage using Timoshenko beam bond model

Xizhong Chen, Li Ge Wang, John P. Morrissey, Jin Y. Ooi

Granular Matter· Volume 24· Issue 3

Abstract

Abstract Attrition and breakage of agglomerates are prevalent during production and handling processes in many industries. Therefore, it is highly desirable to be able to model and analyse the agglomerate breakage process under various loading conditions. The ensemble strength and breakage patterns of agglomerates are still not well understood despite a significant amount of research being carried out. In this study, three-dimensional discrete element method (DEM) simulation of the impact breakage behaviour of agglomerates were performed using a Timoshenko beam bond model which considers axial, shear, twisting and bending behaviours on the bonds. An advantage of the Timoshenko beam bond model is the pertinent parameters of the bond contact have clear physical meaning and therefore could be determined through corresponding experimental characterisations. The mechanical properties of the bonds in this study were firstly calibrated using experimental measurements. The validation of the Timoshenko beam bond model was then undertaken by direct comparisons between the numerical simulation and experimental results of impact tests. It was shown that the time evolution of the agglomerate breakage process obtained from simulation had good agreement with experimental observations. Numerical results indicate that most of the damage happens at the early stage of the impact and a cone shape fracture zone is formed quickly inside the agglomerate where strong compressive stresses are concentrated. It is found that the exterior of the fracture zone is surrounded by an arch shape tensile stress which dominates the fracture propagation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Granular flow and fluidized beds · High-Velocity Impact and Material Behavior · Geotechnical and Geomechanical Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Ghadiri, M., Moreno-Atanasio, R., Hassanpour, A., Antony, S.J.: Analysis of agglomerate breakage. In: Handbook of Powder Technology, vol. 12, pp. 837–872 (2007)10.1016/S0167-3785(07)12022-4 ↗
2. Bika, D.G., Gentzler, M., Michaels, J.N.: Mechanical properties of agglomerates. Powder Technol. 117, 98–112 (2001)10.1016/S0032-5910(01)00318-7 ↗
3. Reynolds, G., Fu, J., Cheong, Y., Hounslow, M., Salman, A.: Breakage in granulation: a review. Chem. Eng. Sci. 60, 3969–3992 (2005)10.1016/j.ces.2005.02.029 ↗
4. Dosta, M., Dale, S., Antonyuk, S., Wassgren, C., Heinrich, S., Litster, J.D.: Numerical and experimental analysis of influence of granule microstructure on its compression breakage. Powder Technol. 299, 87–97 (2016)10.1016/j.powtec.2016.05.005 ↗
5. Potapov, A.V., Campbell, C.S.: The two mechanisms of particle impact breakage and the velocity effect. Powder Technol. 93, 13–21 (1997)10.1016/S0032-5910(97)03242-7 ↗
6. Kafui, K., Thornton, C.: Numerical simulations of impact breakage of a spherical crystalline agglomerate. Powder Technol. 109, 113–132 (2000)10.1016/S0032-5910(99)00231-4 ↗
7. Salman, A., Reynolds, G., Fu, J., Cheong, Y., Biggs, C., Adams, M., Gorham, D., Lukenics, J., Hounslow, M.: Descriptive classification of the impact failure modes of spherical particles. Powder Technol. 143, 19–30 (2004)10.1016/j.powtec.2004.04.005 ↗
8. Thornton, C., Liu, L.: How do agglomerates break? Powder Technol. 143, 110–116 (2004)10.1016/j.powtec.2004.04.035 ↗
9. Wang, L.G., Chen, J.-F., Ooi, J.Y.: A breakage model for particulate solids under impact loading. Powder Technol. 394, 669–684 (2021)10.1016/j.powtec.2021.08.056 ↗
10. Khanal, M., Schubert, W., Tomas, J.: Compression and impact loading experiments of high strength spherical composites. Int. J. Miner. Process. 86, 104–113 (2008)10.1016/j.minpro.2007.12.001 ↗
11. Antonyuk, S., Khanal, M., Tomas, J., Heinrich, S., Mörl, L.: Impact breakage of spherical granules: experimental study and DEM simulation. Chem. Eng. Process. 45, 838–856 (2006)10.1016/j.cep.2005.12.005 ↗
12. Metzger, M.J., Glasser, B.J.: Numerical investigation of the breakage of bonded agglomerates during impact. Powder Technol. 217, 304–314 (2012)10.1016/j.powtec.2011.10.042 ↗
13. Thornton, C., Ciomocos, M., Adams, M.: Numerical simulations of agglomerate impact breakage. Powder Technol. 105, 74–82 (1999)10.1016/S0032-5910(99)00120-5 ↗
14. Ning, Z., Boerefijn, R., Ghadiri, M., Thornton, C.: Distinct element simulation of impact breakage of lactose agglomerates. Adv. Powder Technol. 8, 15–37 (1997)10.1016/S0921-8831(08)60477-X ↗
15. Johnson, K., Kendall, K., Roberts, A.: Surface energy and the contact of elastic solids. Proc. R. Soc. Lond. A 324, 301–313 (1971)10.1098/rspa.1971.0141 ↗
16. Thornton, C., Yin, K.: Impact of elastic spheres with and without adhesion. Powder Technol. 65, 153–166 (1991)10.1016/0032-5910(91)80178-L ↗
17. Mishra, B., Thornton, C.: Impact breakage of particle agglomerates. Int. J. Miner. Process. 61, 225–239 (2001)10.1016/S0301-7516(00)00065-X ↗
18. Tong, Z.B., Yang, R.Y., Yu, A.B., Adi, S., Chan, H.K.: Numerical modelling of the breakage of loose agglomerates of fine particles. Powder Technol. 196, 213–221 (2009)10.1016/j.powtec.2009.08.001 ↗
19. Subero, J.: Impact breakage of agglomerates. University of Surrey (United Kingdom) (2001)10.1016/S0032-5910(01)00276-5 ↗
20. Iveson, S.M., Litster, J.D., Hapgood, K., Ennis, B.J.: Nucleation, growth and breakage phenomena in agitated wet granulation processes: a review. Powder Technol. 117, 3–39 (2001)10.1016/S0032-5910(01)00313-8 ↗
21. Cho, N., Martin, C., Sego, D.: A clumped particle model for rock. Int. J. Rock Mech. Min. Sci. 44, 997–1010 (2007)10.1016/j.ijrmms.2007.02.002 ↗
22. Potyondy, D., Cundall, P.: A bonded-particle model for rock. Int. J. Rock Mech. Min. Sci. 41, 1329–1364 (2004)10.1016/j.ijrmms.2004.09.011 ↗
23. Carmona, H., Wittel, F., Kun, F., Herrmann, H.: Fragmentation processes in impact of spheres. Phys. Rev. E 77, 051302 (2008)10.1103/PhysRevE.77.051302 ↗
24. Khanal, M., Raghuramakrishnan, R., Tomas, J.: Discrete element method simulation of effect of aggregate shape on fragmentation of particle composite. Chem. Eng. Technol. 31, 1526–1531 (2008)10.1002/ceat.200800055 ↗
25. Le Bouteiller, C., Naaim, M.: Aggregate breakage under dynamic loading. Granul. Matter 13, 385–393 (2011)10.1007/s10035-010-0235-2 ↗
26. Brown, N.J., Chen, J.-F., Ooi, J.Y.: A bond model for DEM simulation of cementitious materials and deformable structures. Granul. Matter 16, 299–311 (2014)10.1007/s10035-014-0494-4 ↗
27. Brown, N.J.: Discrete Element Modelling of Cementitious Materials. The University of Edinburgh (2013)
28. Wang, L.G.: Particle Breakage Mechanics in Milling Operation. The University of Edinburgh (2016)
29. Chen, X., Peng, D., Morrissey, J.P., Ooi, J.Y.: A comparative assessment and unification of bond models in DEM simulations. Granul. Matter 24, 1–20 (2022)10.1007/s10035-021-01187-2 ↗
30. Mindlin, R.D., Deresiewica, H.: Elastic spheres in contact under varying oblique forces. J. Appl. Mech. 20, 327–344 (1953)10.1115/1.4010702 ↗
31. Tsuji, Y., Tanaka, T., Ishida, T.: Lagrangian numerical simulation of plug flow of cohesionless particles in a horizontal pipe. Powder Technol. 71, 239–250 (1992)10.1016/0032-5910(92)88030-L ↗
32. Sakaguchi, H., Ozaki, E., Igarashi, T.: Plugging of the flow of granular materials during the discharge from a silo. Int. J. Mod. Phys. B 7, 1949–1963 (1993)10.1142/S0217979293002705 ↗
33. Ai, J., Chen, J.-F., Rotter, J.M., Ooi, J.Y.: Assessment of rolling resistance models in discrete element simulations. Powder Technol. 206, 269–282 (2011)10.1016/j.powtec.2010.09.030 ↗
34. Timoshenko, S.P.: LXVI. On the correction for shear of the differential equation for transverse vibrations of prismatic bars. Lond. Edinb. Dublin Philos. Mag. J. Sci. 41, 744–746 (1921)10.1080/14786442108636264 ↗
35. Subero, J., Pascual, D., Ghadiri, M.: Production of agglomerates of well-defined structures and bond properties using a novel technique. Chem. Eng. Res. Des. 78, 55–60 (2000)10.1205/026387600527077 ↗
36. Subero, J., Ghadiri, M.: Breakage patterns of agglomerates. Powder Technol. 120, 232–243 (2001)10.1016/S0032-5910(01)00276-5 ↗
37. Ketterhagen, W.R., Curtis, J.S., Wassgren, C.R., Kong, A., Narayan, P.J., Hancock, B.C.: Granular segregation in discharging cylindrical hoppers: a discrete element and experimental study. Chem. Eng. Sci. 62, 6423–6439 (2007)10.1016/j.ces.2007.07.052 ↗
38. Parab, N.D., Guo, Z., Hudspeth, M.C., Claus, B.J., Fezzaa, K., Sun, T., Chen, W.W.: Fracture mechanisms of glass particles under dynamic compression. Int. J. Impact Eng. 106, 146–154 (2017)10.1016/j.ijimpeng.2017.03.021 ↗
39. Delenne, J.Y., El Youssoufi, M.S., Cherblanc, F., Bénet, J.C.: Mechanical behaviour and failure of cohesive granular materials. Int. J. Numer. Anal. Methods Geomech. 28, 1577–1594 (2004)10.1002/nag.401 ↗
40. Bardella, L.: Mechanical behavior of glass-filled epoxy resins: experiments, homogenization methods for syntactic foams, and applications. Université de Brescia (2000)
41. Wittel, F.K., Carmona, H.A., Kun, F., Herrmann, H.J.: Mechanisms in impact fragmentation. Int. J. Fract. 154, 105–117 (2008)10.1007/s10704-008-9267-6 ↗
42. Antonyuk, S., Heinrich, S., Tomas, J., Deen, N.G., van Buijtenen, M.S., Kuipers, J.: Energy absorption during compression and impact of dry elastic-plastic spherical granules. Granul. Matter 12, 15–47 (2010)10.1007/s10035-009-0161-3 ↗
43. Labra, C., Escolano, E., Pasenau, M.: GID features for discrete element simulations. In: 5th Conference on Advances and Applications of GiD, Barcelona (2010)
44. Escolano, E., Coll, A., Melendo, A., Monròs, A., Pasenau, M.A.: GiD User Manual & GiD Reference Manual. CIMNE (2010)
45. Ghadiri, M.: Particle Impact Breakage. Powder Technology Handbook 205–212 (2006)10.1201/9781420044119.ch2.10 ↗
46. Arbiter, N., Harris, C., Stamboltzis, G.: Single fracture of brittle spheres. Trans AIME 244, 118–133 (1969)
47. Shipway, P., Hutchings, I.: Fracture of brittle spheres under compression and impact loading. II. Results for lead-glass and sapphire spheres. Philos. Mag. A 67, 1405–1421 (1993)10.1080/01418619308225363 ↗
48. Salman, A., Gorham, D.: The fracture of glass spheres. Powder Technol. 107, 179–185 (2000)10.1016/S0032-5910(99)00186-2 ↗
49. Irwin, G.R., Kies, J.: Critical energy rate analysis of fracture strength. SPIE Milestone Series MS 137, 136–141 (1997)
50. Labra, C., Ooi, J., Sun, J.: Spatial and temporal coarse-graining for DEM analysis. AIP Conference Proceedings: AIP, pp. 1258–1261 (2013)10.1063/1.4812167 ↗
51. Weinhart, T., Labra, C., Luding, S., Ooi, J.Y.: Influence of coarse-graining parameters on the analysis of DEM simulations of silo flow. Powder Technol. 293, 138–148 (2016)10.1016/j.powtec.2015.11.052 ↗
52. Wang, L.G., Morrissey, J.P., Barrasso, D., Slade, D., Clifford, S., Reynolds, G., Ooi, J.Y., Litster, J.D.: Model driven design for twin screw granulation using mechanistic-based population balance model. Int. J. Pharm. 607, 120939 (2021)10.1016/j.ijpharm.2021.120939 ↗
53. O’Sullivan, C., Bray, J.D.: Selecting a suitable time step for discrete element simulations that use the central difference time integration scheme. Eng. Comput. 21, 278–303 (2004)10.1108/02644400410519794 ↗
54. Brown, N.J., Morrissey, J.P., Ooi, J. EDEM Contact Model: Timoshenko Beam Bond Model. TUo Edinburgh, Editor (2015)
55. Lisjak, A., Grasselli, G.: A review of discrete modeling techniques for fracturing processes in discontinuous rock masses. J. Rock Mech. Geotech. Eng. 6, 301–314 (2014)10.1016/j.jrmge.2013.12.007 ↗
56. Craig, J.I., Bauchau, O.A.: Structural Analysis. Springer Netherlands, Dordrecht (2009)