An interpretation of the influence of particle shape on the mechanical behavior of granular material
Source abstract
Abstract
An earthquake refers to volcanic or magmatic activity or any other sudden stress changes in the earth which can result in instability, liquefaction and ground settlement. Past studies show that liquefaction and instability of granular soils are not the only consequence of earthquakes. Significant advances have been made in the past few decades to understand the effect of various soil characteristics (e.g. size, mineralogy, fines content) and boundary conditions on their role on the instability and liquefaction susceptibility of geomaterials. However, studies on the impact of particle shape on the mechanical characteristics of granular material has been relatively less documented and is therefore, unclear. The current experimental study deals with the above problem, where, three materials having different shapes (crushed glass, Rhein sand and round glass beads) but possessing the same uniformity coefficient and mean grain size were used. The materials were thoroughly washed in a 0.063 mm sieve to eliminate fines. Experiments were conducted using the monotonic triaxial (both drained and undrained) and direct shear devices available at the Ruhr-Universitat Bochum. No significant particle breakage was observed throughout the entire test program for the three materials. The results of our experiments showed the significant influence of the grain shape on the mechanical characteristics of sands (e.g. shear strength, peak friction and dilation angle). The analysis of results showed a possible correlation between the mechanical and intrinsic characteristics of granular material and the particle shapes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Geotechnical Engineering and Soil Mechanics · Geotechnical Engineering and Soil Stabilization · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Altuhafi, F., Coop, M.R., Georgiannou, V.N.: Effect of particle shape on the mechanical behavior of natural sands. J. Geotech. Geoenviron. Eng. 142(12), 04016071 (2016)10.1061/(ASCE)GT.1943-5606.0001569 ↗
2. Alshibli, K.A., Cil, M.B.: Influence of particle morphology on the friction and dilatancy of sand. J. Geotech. Geoenviron. Eng. 144(3), 04017118 (2018). https://doi.org/10.1061/(ASCE)GT.1943-5606.000184110.1061/(ASCE)GT.1943-5606.0001841 ↗
3. Baldi, G., Nova, R.: Membrane penetration effects in triaxial testing. J. Geotech. Eng. (ASCE) 110, 403–420 (1984)10.1061/(ASCE)0733-9410(1984)110:3(403) ↗
4. Been, K., Jefferies, M.G.: A state parameter for sands. Geotechnique 35(2), 99–112 (1985)10.1680/geot.1985.35.2.99 ↗
5. Been, K., Jefferies, M.G., Hachey, J.: The steady state of sand. Geotechnique 41(3), 365–381 (1991). https://doi.org/10.1680/geot.1991.41.3.36510.1680/geot.1991.41.3.365 ↗
6. Bishop, A.W.: The strength of soils as engineering materials. Geotechnique 16(2), 89–130 (1966)10.1680/geot.1966.16.2.91 ↗
7. Bolton, M.D.: The strength and dilatancy of sands. Geotechnique 36(1), 65–78 (1986)10.1680/geot.1986.36.1.65 ↗
8. Chakraborty, T., Salgado, R.: Dilatancy and shear strength of sand at low confining pressures. J. Geotech. Geoenviron. Eng. 136(3), 527–532 (2010). https://doi.org/10.1061/(ASCE)GT.1943-5606.000023710.1061/(ASCE)GT.1943-5606.0000237 ↗
9. Chan, L.C.Y., Page, N.W.: Particle fractal and load effects on internal friction in powders. Powder Technol. 90(3), 259–266 (1997)10.1016/S0032-5910(96)03228-7 ↗
10. Cho, G.C., Dodds, J., Santamarina, J.C.: Particle shape effects on packing density, stiffness, and strength: natural and crushed sands. J. Geotech. Geoenviron. Eng. 132(5), 591–602 (2006)10.1061/(ASCE)1090-0241(2006)132:5(591) ↗
11. Cornforth, D.H.: Some experiments on the influence of strain conditions on the strength of sand. Geotechnique 14(2), 143–167 (1964)10.1680/geot.1964.14.2.143 ↗
12. Doanh, T., Hoang, M.T., Roux, J.-N., Dequeker, C.: Stick-slip behaviour of model granular materials in drained triaxial compression. Granul. Matter 15(1), 1–23 (2013)10.1007/s10035-012-0384-6 ↗
13. DIN18123: Baugrund, Untersuchung von Bodenproben - Bestimmung der Korngrößenverteilung. Germany (2011)
14. DIN18124: Baugrund, Untersuchung von Bodenproben - Bestimmung der Korndichte - Kapillarpyknometer, Weithalspyknometer, Gaspyknometer. Germany (2011)
15. DIN18126: Baugrund, Untersuchung von Bodenproben - Bestimmung der Dichte nichtbindiger Böden bei lockerster und dichtester Lagerung. Germany (1996)
16. Hammad, W. I. (1991) Modelisation non lineare et etude experimentale des bandes de cisaillement dans les sable. DSc thesis, Universite Grenoble Alpes
17. Hayman, N.W., Ducloue, L., Foco, K.L., Daniels, K.E.: Granular controls on periodicity of stick-slip events: kinematics and forcechains in an experimental fault. Pure. appl. Geophys. 168(12), 2239–2257 (2011)10.1007/s00024-011-0269-3 ↗
18. Ishihara, K.: Liquefaction and flow failure during earthquakes. Geotechnique 43(3), 351–415 (1993)10.1680/geot.1993.43.3.351 ↗
19. Islam, M.N., Siddika, A., Hossain, M.B., Rahman, A., Asad, M.A.: Effect of particle size on the shear strength behavior of sands. Aust. Geomech. J. 46(3), 75–85 (2011)
20. Jefferies, M., Been, K.: Soil Liquefaction: A Steady State Approach, 2nd edn. CRC Press, Taylor and Francis Group, LLC, Boca Raton (2016)
21. Jensen, R.P., Edil, T.B., Bosscher, P.J., Plesha, M.E., Kahla, N.B.: Effect of particle shape on interface behavior of DEM-simulated granular materials. Int. J. Geomech. 1(1), 1–19 (2001)10.1061/(ASCE)1532-3641(2001)1:1(1) ↗
22. Jerves, A.X., Kawamoto, R.Y., Andrade, J.E.: Effects of grain morphology on steady state: a computational analysis. Acta Geotech. 11, 493–503 (2015). https://doi.org/10.1007/s11440-015-0422-810.1007/s11440-015-0422-8 ↗
23. Jiang, M., Zhang, A., Fu, C.: 3-D DEM simulations of drained triaxial tests on inherently anisotropic granulates. Eur. J. Environ. Civ. Eng. (2017). https://doi.org/10.1080/19648189.2017.138554110.1080/19648189.2017.1385541 ↗
24. Kumara, J., Hayano, K., Ogiwara, K.: Image analysis techniques on evaluation of particle size distribution of gravel. Int. J. GEOMATE 3(1), 290–297 (2012)
25. Lade, P. V. and Ibsen, L. B. (1997), “A study of the phase transformation and the characteristic lines of sand behavior”, Proceedings of the International Symposium on Deformation and Progressive Failure in Geomechanics, Nagoya, Japan, Oct. 1997
26. Li, X.S., Dafalias, Y.F.: Dilatancy for cohesionless soils. Geotechnique 50(4), 449–460 (2000)10.1680/geot.2000.50.4.449 ↗
27. Murthy, T.G., Loukidis, D., Carraro, J.A.H., Prezzi, M., Salgado, R.: Undrained monotonic response of clean and silty sands. Geotechnique 57(3), 273–288 (2007)10.1680/geot.2007.57.3.273 ↗
28. Ng, T.T.: Fabric evolution of ellipsoidal arrays with different particle shapes. J. Eng. Mech. 127(10), 994–999 (2001)10.1061/(ASCE)0733-9399(2001)127:10(994) ↗
29. Ng, T., Zhou, W., Chang, X.: Effect of particle shape and fine content on the behavior of binary mixture. J. Eng. Mech. (2016). https://doi.org/10.1061/(ASCE)EM.1943-7889.000107010.1061/(ASCE)EM.1943-7889.0001070 ↗
30. Nguyen, H.B.K., Rahman, M.M., Fourie, A.B.: Characteristic behavior of drained and undrained triaxial compression tests: DEM study. J. Geotech. Geoenviron. Eng. 144(9), 04018060 (2018)10.1061/(ASCE)GT.1943-5606.0001940 ↗
31. Olson, S.M., Mattson, B.B.: Mode of shear effects on yield and liquefied strength ratios. Can. Geotech. J. 45(4), 574–587 (2008)10.1139/T07-114 ↗
32. Omar, T., Sadrekarimi, A.: Effects of multiple corrections on triaxial compression testing of sands. J. GeoEng. 9(2), 75–83 (2014)
33. Phan, V.T., Hsiao, D., Nguyen, P.T.: Effects of fines contents on engineering properties of sand-fines mixtures. In: Proceedings of Sustainable Development of Civil, Urban and Transportation Engineering Conference, Procedia Engineering, vol. 142, pp. 213–220 (2016)10.1016/j.proeng.2016.02.034 ↗
34. Rowe, P.W.: The stress–dilatancy relation for static equilibrium of an assembly of particles in contact. Proc. R. Soc. Lond. A 269, 500–527 (1962)10.1098/rspa.1962.0193 ↗
35. Sadrekarimi, A., Olson, S.M.: Steady state friction angle of sands. Geotechnique 61(9), 771–783 (2011). https://doi.org/10.1680/geot.9.P.09010.1680/geot.9.P.090 ↗
36. Santamarina, J.C., Cho, G.C.: Determination of steady state parameters in sandy soils: simple procedure. Geotech. Test. J. 24(2), 185–192 (2001)10.1520/GTJ11338J ↗
37. Sarkar, D., König, D., Goudarzy, M.: On the influence of particle characteristics on the index void ratios in granular materials. Particuology (2019). https://doi.org/10.1016/j.partic.2018.09.01010.1016/j.partic.2018.09.010 ↗
38. Schanz, T., Vermeer, P.A.: Angles of friction and dilatancy of sand. Geotechnique 46(1), 145–151 (1996)10.1680/geot.1996.46.1.145 ↗
39. Schofield, A., Wroth, C.P.: Critical State Soil Mechanics, pp. 1–310. McGraw-Hill, New York (1968)
40. Sladen, J.A., D’Hollander, R.D., Krahn, J.: Back analysis of the Nerlerk berm liquefaction slides. Can. Geotech. J. 22(4), 579–588 (1985)10.1139/t85-077 ↗
41. Strahler, A., Stuedlein, A.W., Arduino, P.: Stress–strain response and dilatancy of sandy gravel in triaxial compression and plane strain. J. Geotech. Geoenviron. Eng. (2015). https://doi.org/10.1061/(asce)gt.1943-5606.000143510.1061/(asce)gt.1943-5606.0001435 ↗
42. Sukumaran, B., Ashmawy, A.K.: Quantitative characterization of the geometry of discrete particles. Geotechnique 51(7), 171–179 (2001)10.1680/geot.2001.51.7.619 ↗
43. Tatsuoka, F., Toki, S., Miura, S., Kato, H., Okamoto, M., Yamada, S., Yasuda, S., Tanizawa, F.: Some factors affecting cyclic undrained triaxial strength of sand. Soils Found. 26(3), 99–116 (1986)10.3208/sandf1972.26.3_99 ↗
44. Thevanayagam, S.: Effect of fines and confining stress on undrained shear strength of silty sands. J. Geotech. Geoenviron. Eng. 124(6), 479–491 (1998)10.1061/(ASCE)1090-0241(1998)124:6(479) ↗
45. Thornton, C.: Numerical simulations of deviatoric shear deformation of granular media. Geotechnique 50(1), 43–53 (2000). https://doi.org/10.1680/geot.2000.50.1.4310.1680/geot.2000.50.1.43 ↗
46. Tordesillas, A., Walker, D.M., Lin, Q.: Force cycles and force chains. Phys. Rev. E (2011). https://doi.org/10.1103/physreve.81.01130210.1103/physreve.81.011302 ↗
47. Tordesillas, A., Hilton, J.E., Tobin, S.T.: Stick-slip and force chain evolution in a granular bed in response to a grain intruder. Phys. Rev. E (2014). https://doi.org/10.1103/physreve.89.04220710.1103/physreve.89.042207 ↗
48. Wang, G., Wei, J.: Microstructure evolution of granular soils in cyclic mobility and post-liquefaction process. Granul. Matter 18, 51 (2016)10.1007/s10035-016-0621-5 ↗
49. Wang, J., Zhang, H., Tang, S., Liang, Y.: Effects of particle size distribution on shear strength of accumulated soil. J. Geotech. Geoenviron. Eng. (2013). https://doi.org/10.1061/(asce)gt.1943-5606.000093110.1061/(asce)gt.1943-5606.0000931 ↗
50. Wei, J., Huang, D., Wang, G.: Micro-scale descriptors for particle-void distribution and jamming transition in pre- and post-liquefaction of granular soils. J. Eng. Mech. 144(8), 04018067 (2018)10.1061/(ASCE)EM.1943-7889.0001482 ↗
51. Wichtmann, T. (2005) Explicit accumulation model for non-cohesive soils under cyclic loading. Ph.D. Thesis, Ruhr-Universität Bochum
52. Wu, Y., Yamamoto, H., Izumi, A.: Experimental investigation on crushing of granular material in one-dimensional test. Period. Polytech. Civ. Eng. 60(1), 27–36 (2016). https://doi.org/10.3311/PPci.802810.3311/PPci.8028 ↗
53. Yang, J., Dai, B.B.: Is the quasi-steady state a real behavior? A micromechanical perspective. Géotechnique 61(2), 175–183 (2011)10.1680/geot.8.P.129 ↗
54. Yang, J., Luo, X.D.: Exploring the relationship between steady state and particle shape for granular materials. J. Mech. Phys. Solids 84, 196–213 (2015)10.1016/j.jmps.2015.08.001 ↗
55. Zhang, H., Garga, V.K.: Quasi-steady state: a real behavior? Can. Geotech. J. 34, 749–761 (1997)10.1139/t97-046 ↗
56. Zhao, Y., Liu, Z.: Study of material composition effects on the mechanical properties of soil-rock mixtures. Adv. Civ. Eng. (2018). https://doi.org/10.1155/2018/385472710.1155/2018/3854727 ↗
57. Zheng, J., Hryciw, R.D.: Traditional soil particle sphericity, roundness and surface roughness by computational geometry. Géotechnique 65(6), 494–506 (2015)10.1680/geot.14.P.192 ↗
58. Zheng, J., Hryciw, R.D.: Index void ratios of sands from their intrinsic properties. J. Geotech. Geoenviron. Eng. (2016). https://doi.org/10.1061/(asce)gt.1943-5606.000157510.1061/(asce)gt.1943-5606.0001575 ↗