journal article·2019-12-01

Using chloroprene rubber waste in rubber blends: optimizing performance by adding fillers

Nabil Hayeemasae, Siti Zuliana Salleh, Hanafi Ismail

Green Materials· Volume 7· Issue 4
Publisher page

Abstract

In the present study, chloroprene rubber waste (CRW) was used in an attempt to extend its use and create a value-added material based on natural rubber (NR) and CRW blends. Conventional fillers including carbon black (CB), silica (SS) and calcium carbonate (CC) were used individually to optimize the performance of the rubber blends. The properties evaluated were the curing characteristics, physical and dynamic properties and thermal stability. From the results obtained, it is clear that the type and amount of filler play a crucial role in promoting the performance of the blend. A faster curing rate was observed for the blends containing CB and CC, while SS-filled NR/CRW blends showed the opposite trend. SS-filled NR/CRW blends exhibited tremendously improved tensile properties compared with CB- and CC-filled blends. This is because two types of competing interactions/reactions take place: the dipole–dipole interaction between SS and CRW and the silane coupling reactions. The tensile properties are also in good agreement with the observed dynamic properties. A higher storage modulus and a lower damping factor were found in the blends containing CB and SS, indicating more restricted molecular mobility caused by rubber–filler interactions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Polymer crystallization and properties · Polymer composites and self-healing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Rubber Technology and Polymer Science, Faculty of Science and Technology, Prince of Songkla University, Pattani, Thailand

School of Materials and Mineral Resources Engineering, Universiti Sains Malaysia, Nibong Tebal, Malaysia

References (48)

Show source-provided references
1. 10.1021/ie50369a00410.1021/ie50369a004 ↗
2. 10.1080/03602559.2012.76202010.1080/03602559.2012.762020 ↗
3. 10.1080/0360255090341380510.1080/03602550903413805 ↗
4. 10.1002/vnl.2029110.1002/vnl.20291 ↗
5. 10.1081/PPT-12001439210.1081/PPT-120014392 ↗
6. 10.1080/1023666X.2013.81402510.1080/1023666X.2013.814025 ↗
7. 10.1177/009524431561362010.1177/0095244315613620 ↗
8. 10.1002/pat.129310.1002/pat.1293 ↗
9. 10.1002/app.141110.1002/app.1411 ↗
10. 10.1016/S0142-9418(00)00067-210.1016/S0142-9418(00)00067-2 ↗
11. 10.1002/pen.2447710.1002/pen.24477 ↗
12. ASTM · 2017
13. ASTM · 2016
14. ASTM · 2015
15. JIS · 2001
16. ASTM · 2018
17. 10.1063/1.172379110.1063/1.1723791 ↗
18. 10.1002/app.1151410.1002/app.11514 ↗
19. 10.1002/app.1165910.1002/app.11659 ↗
20. 10.1016/j.polymertesting.2013.07.01510.1016/j.polymertesting.2013.07.015 ↗
21. Ansarifar MA · Iranian Polymer Journal · 2000 · 9 · 81
22. 10.1177/009524431140550310.1177/0095244311405503 ↗
23. 10.1016/j.polymertesting.2006.12.00310.1016/j.polymertesting.2006.12.003 ↗
24. 10.1016/S0032-3861(96)00993-710.1016/S0032-3861(96)00993-7 ↗
25. 10.5254/1.353861510.5254/1.3538615 ↗
26. 10.1002/app.1085810.1002/app.10858 ↗
27. 10.1080/03602559.2014.88611710.1080/03602559.2014.886117 ↗
28. 10.1002/app.1024910.1002/app.10249 ↗
29. Chuayjuljit S · Journal of Metals, Materials and Minerals · 2002 · 12 · 51
30. 10.1002/pen.2394910.1002/pen.23949 ↗
31. 10.5254/1.354826210.5254/1.3548262 ↗
32. 10.1361/105994906X8342010.1361/105994906X83420 ↗
33. 10.1002/pc.75008020810.1002/pc.750080208 ↗
34. Therattil SJ · Iranian Polymer Journal · 2008 · 17 · 419
35. 10.1002/app.3696910.1002/app.36969 ↗
36. 10.1016/0014-3057(94)00156-110.1016/0014-3057(94)00156-1 ↗
37. 10.1016/j.polymertesting.2007.07.00410.1016/j.polymertesting.2007.07.004 ↗
38. 10.1002/pc.2234010.1002/pc.22340 ↗
39. 10.1016/S0168-583X(03)00638-410.1016/S0168-583X(03)00638-4 ↗
40. 10.1016/j.polymdegradstab.2006.11.01310.1016/j.polymdegradstab.2006.11.013 ↗
41. 10.1016/j.matchemphys.2016.01.04110.1016/j.matchemphys.2016.01.041 ↗
42. 10.1016/j.tca.2011.06.01010.1016/j.tca.2011.06.010 ↗
43. 10.1016/j.tca.2008.07.00410.1016/j.tca.2008.07.004 ↗
44. 10.1177/009524431141344210.1177/0095244311413442 ↗
45. 10.1016/j.matdes.2013.02.08610.1016/j.matdes.2013.02.086 ↗
46. 10.1002/pc.2025010.1002/pc.20250 ↗
47. 10.1016/j.compositesa.2005.03.00410.1016/j.compositesa.2005.03.004 ↗
48. 10.1002/app.1206710.1002/app.12067 ↗