journal article·2018-03-01Open access

Dry-spinning of cellulose nanocrystal/polylactic acid composite fibers

Caitlyn M Clarkson, Jeffrey P Youngblood

Green Materials· Volume 6· Issue 1

Abstract

In the present study, the authors explored the viability of dry-spinning to produce cellulose nanocrystal (CNC) and polylactic acid composite fibers from dimethylformamide solutions. Fiber surface morphology, crystallinity and mechanical properties were assessed for fibers with 0, 1, 3 and 5 wt% CNCs. The fiber morphology transitioned from smooth to sharkskin to severe melt fracture with increasing extrusion speed. Surface morphology appeared to be weakly dependent on CNC content and addition of CNCs did not reduce melt fracture. Addition of 1 wt% CNC resulted in the highest crystallinity, an approximately 30% increase for the dry-spun composite fibers. Fibers exhibited a mixture of ductile and brittle-like behavior during mechanical testing. The elastic modulus and strength at failure were measured for three fiber diameter ranges and for increasing CNC content. A maximum average elastic modulus of 6·5 GPa and 100 MPa increase in strength at failure are reported for dry-spun composite fibers.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Cellulose Research Studies · Natural Fiber Reinforced Composites · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Engineering, Purdue University, West Lafayette, IN, USA

References (38)

Show source-provided references
1. 10.1039/c0cs00108b10.1039/c0cs00108b ↗
2. 10.1680/jgrma.15.0001310.1680/jgrma.15.00013 ↗
3. 10.1039/C6NR09494E10.1039/C6NR09494E ↗
4. 10.1021/acs.biomac.7b0002610.1021/acs.biomac.7b00026 ↗
5. 10.1021/bm501131a10.1021/bm501131a ↗
6. 10.1021/bm400794e10.1021/bm400794e ↗
7. 10.1007/s10570-014-0411-310.1007/s10570-014-0411-3 ↗
8. 10.1021/bm501161v10.1021/bm501161v ↗
9. 10.1016/j.polymer.2017.06.07210.1016/j.polymer.2017.06.072 ↗
10. 10.1021/acsbiomaterials.5b0016110.1021/acsbiomaterials.5b00161 ↗
11. 10.1021/bm901254n10.1021/bm901254n ↗
12. Ureña-Benavides EE · Biomacromolecules · 2011 · 122 · 13022
13. 10.1080/15421406.2012.63597710.1080/15421406.2012.635977 ↗
14. 10.1016/j.polymer.2012.12.03510.1016/j.polymer.2012.12.035 ↗
15. 10.1021/bm101280f10.1021/bm101280f ↗
16. 10.1016/0032-3861(82)90176-810.1016/0032-3861(82)90176-8 ↗
17. 10.1016/0032-3861(87)90012-710.1016/0032-3861(87)90012-7 ↗
18. 10.1002/app.1994.07054111810.1002/app.1994.070541118 ↗
19. 10.1002/app.1990.07039060510.1002/app.1990.070390605 ↗
20. 10.1002/app.1989.07037082410.1002/app.1989.070370824 ↗
21. 10.1002/app.1994.07054111710.1002/app.1994.070541117 ↗
22. 10.1002/app.1983.07028031210.1002/app.1983.070280312 ↗
23. 10.3390/ma812544710.3390/ma8125447 ↗
24. 10.1016/j.progpolymsci.2007.01.00510.1016/j.progpolymsci.2007.01.005 ↗
25. 10.4236/mme.2012.2402010.4236/mme.2012.24020 ↗
26. 10.1007/BF0036650410.1007/BF00366504 ↗
27. 10.1122/1.144518610.1122/1.1445186 ↗
28. 10.1007/s00397-004-0393-410.1007/s00397-004-0393-4 ↗
29. 10.1016/S0377-0257(96)01507-810.1016/S0377-0257(96)01507-8 ↗
30. 10.1016/j.polymer.2007.09.02010.1016/j.polymer.2007.09.020 ↗
31. 10.1016/S0032-3861(01)00086-610.1016/S0032-3861(01)00086-6 ↗
32. 10.1007/s10570-013-0058-510.1007/s10570-013-0058-5 ↗
33. 10.1021/ma971545p10.1021/ma971545p ↗
34. 10.1002/polb.1067410.1002/polb.10674 ↗
35. 10.1680/gmat.14.0001510.1680/gmat.14.00015 ↗
36. 10.1021/la102216v10.1021/la102216v ↗
37. 10.1002/app.4197010.1002/app.41970 ↗
38. 10.1016/j.compositesa.2015.10.04110.1016/j.compositesa.2015.10.041 ↗