journal article·2015-12-01

Investigation on gypsum plaster waste recycling: an eco-friendly material

Gladis Camarini, Karla Danielle dos Santos Lima, Sayonara M. M. Pinheiro

Green Materials· Volume 3· Issue 4
Publisher page

Abstract

Reducing the anthropogenic impacts on the environment is an important task, one that must be tackled in the building sector, which has considerable responsibility for such impacts. The amount of construction and demolition waste is increasing, and, consequently, so is gypsum plaster waste. This waste is due to the increase of using gypsum plaster in buildings as renderings and plates. This paper presents results that can enhance the value of gypsum waste recycling, thus reducing the damage the building sector does to the environment. Both the energy consumed in recycling and the way to recycle in stationary kilns were studied in order to establish the best calcination temperature and the residence time. With this result (calcination time and temperature), the properties of the recycled plaster were evaluated in powder, fresh state and hardened state. The results obtained are better than for commercial gypsum plaster, thus indicating that this a good way to recycle and add value to this waste material.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Innovations in Concrete and Construction Materials · Recycled Aggregate Concrete Performance · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Architecture and Construction, School of Civil Engineering, Architecture and Urban Design, University of Campinas, Campinas, Brazil

Federal University of Espírito Santo, Vitória, Brazil

References (33)

Show source-provided references
1. 10.1016/j.conbuildmat.2011.04.04810.1016/j.conbuildmat.2011.04.048 ↗
2. 10.1002/fam.111710.1002/fam.1117 ↗
3. 10.1002/fam.78610.1002/fam.786 ↗
4. 10.1007/BF0247317610.1007/BF02473176 ↗
5. 10.4028/www.scientific.net/AMM.71-78.124210.4028/www.scientific.net/AMM.71-78.1242 ↗
6. Dias AMN 1994 Gesso de construção: caracterização do pó, pasta e argamassas e aplicação como revestimento interno. MSc thesis University of São Paulo – São Paulo São Paulo, Brazil (in Portuguese)
7. 10.1016/S0713-2743(00)80045-810.1016/S0713-2743(00)80045-8 ↗
8. Alencar C · 2008 · 1 · 1
9. Schmitz IBTA · 2009 · 1 · 1
10. 10.1590/S1678-8621201100020001310.1590/S1678-86212011000200013 ↗
11. Cavalcanti RAA · 2012 · 1 · 1
12. Trovão APM 2012 Pasta de gesso com incorporação de resíduo de gesso e aditivo retardador de pega. MSc thesis Federal University of Espirito Santo Vitória, Espírito Santo, Brazil (in Portuguese)
13. Bardella PS · 2003 · 1 · 1
14. Pereira VM · 2007 · 1 · 1
15. 10.4028/www.scientific.net/AMR.374-377.130710.4028/www.scientific.net/AMR.374-377.1307 ↗
16. 10.4028/www.scientific.net/AMM.260-261.97710.4028/www.scientific.net/AMM.260-261.977 ↗
17. 10.4028/www.scientific.net/KEM.668.27510.4028/www.scientific.net/KEM.668.275 ↗
18. 10.7763/IJET.2015.V7.79410.7763/IJET.2015.V7.794 ↗
19. 10.4028/www.scientific.net/KEM.668.31210.4028/www.scientific.net/KEM.668.312 ↗
20. Pinheiro SMM 2011 Gesso reciclado: avaliação das propriedades para uso em componentes. PhD thesis University of Campinas Campinas, São Paulo, Brazil (in Portuguese)
21. Ribeiro AS 2011 Estudo e otimização do processo de produção de gesso reciclado a partir de resíduos de construção civil. PhD thesis Universidade Federal de Pernambuco, Recife Pernambuco, Brazil (in Portuguese)
22. Bardella PS 2011 Análise das propriedades de pastas de gesso de construção reciclado. PhD thesis University of Campinas Campinas, São Paulo, Brazil (in Portuguese)
23. Niglio F · 2005
24. ABNT (Associação Brasileira de Normas Técnicas) · 2000
25. ABNT · 1991
26. ABNT · 1991
27. 10.7763/IJET.2015.V7.79310.7763/IJET.2015.V7.793 ↗
28. ABNT · 1991
29. ABNT · 1994
30. Camarini G Pereira VM Bardella PS 2008 Evaluation of Thenoz methodology to measure concrete air permeability American Concrete Institute Farmington Hills, MI, USA special publication no. 253 201 216
31. 10.4028/www.scientific.net/AMR.224.13210.4028/www.scientific.net/AMR.224.132 ↗
32. Mukhopadhyaya P · Journal of ASTM International (JAI) · 2001 · 8 · 1
33. 10.1016/j.minpro.2013.08.00510.1016/j.minpro.2013.08.005 ↗