Effects of laser-textured surface pattern on the wetting behavior and composition optimization of brazing filler: experimental study and numerical simulation
Source abstract
Abstract
To reduce interface brittle compounds of brazed joints, laser-textured surface pattern was used instead of excessive active element to enhance the wetting behavior of brazing filler on Ti3SiC2 ceramic substrate. The cylindrical surface pattern was designed by theoretical calculation and examined by numerical simulation. The numerical simulation results showed that the cylindrical surface pattern can not only effectively reduce the wetting angle on the substrate surface, but also greatly accelerate the spreading process of brazing filler. The results of wetting experiment showed that the wettability of Ag–Cu–2Ti (wt. %) brazing filler on Ti3SiC2 with cylindrical surface pattern sufficiently increased compared with that on smooth surface, which were consistent with the theoretical calculation and numerical simulation results. The titanium content in Ag–Cu–Ti that suitable for the brazing of Ti3SiC2 even could be reduced from 4.5 to 2.0 wt. %. The novel method provides a feasible route for promoting the wetting behavior and achieving composition optimization of brazing filler.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · High-Temperature Coating Behaviors · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. X.Y. Dai, J. Cao, Z. Chen, X.G. Song, J.C. Feng, Brazing SiC ceramic using novel B4C reinforced Ag–Cu–Ti composite filler. Ceram. Int. 42(5), 6319–6328 (2016)10.1016/j.ceramint.2016.01.021 ↗
2. J. Li, G.M. Sheng, H. Li, Additional active metal Nb in Cu–Ni system filler metal for brazing of TiC cermet/steel. Mater. Lett. 156, 10–13 (2015)10.1016/j.matlet.2015.04.126 ↗
3. Y.Q. Qin, J.C. Feng, Microstructure and mechanical properties of C/C composite/TC4 joint using AgCuTi filler metal. Mater. Sci. Eng. A. 454–455, 322–327 (2007)10.1016/j.msea.2006.11.056 ↗
4. H.Y. Chen, J.K. Peng, L. Fu, Effects of interfacial reaction and atomic diffusion on the mechanical property of Ti3SiC2 ceramic to Cu brazing joints. Vacuum 130, 56–62 (2016)10.1016/j.vacuum.2016.05.002 ↗
5. J.K. Liu, J. Cao, X.G. Song, Y.F. Wang, J.C. Feng, Evaluation on diffusion bonded joints of TiAl alloy to Ti3SiC2 ceramic with and without Ni interlayer: interfacial microstructure and mechanical properties. Mater. Des. 57, 592–597 (2014)10.1016/j.matdes.2014.01.029 ↗
6. C. Nituca, Thermal analysis of electrical contacts from pantograph-catenary system for power supply of electric vehicles. Electr. Pow. Syst. Res. 96, 211–217 (2013)10.1016/j.epsr.2012.11.009 ↗
7. O. Dezellus, B. Gardiola, J. Andrieux, S. Lay, Experimental evidence of copper insertion in a crystallographic structure of Ti3SiC2 MAX phase. Scr. Mater. 104, 17–20 (2015)10.1016/j.scriptamat.2015.03.015 ↗
8. W. Barthlott, C. Neinhuis, Purity of the sacred lotus, or escape from contamination in biological surfaces. Planta 202, 1–8 (1997)10.1007/s004250050096 ↗
9. L.G. Qin, P. Lin, Y.L. Zhang, G.N. Dong, Q.F. Zeng, Influence of surface wettability on the tribological properties of laser textured Co-Cr-Mo alloy in aqueous bovine serum albumin solution. Appl. Surf. Sci. 268, 79–86 (2013)10.1016/j.apsusc.2012.12.003 ↗
10. K.C. Xu, H.P. Yan, C.F. Tan, Y.Y. Lu, Y. Li, G.W. Ho, R. Ji, M.H. Hong, Hedgehog inspired CuO nanowires/Cu2O composites for broadband visible-light-driven recyclable surface enhanced raman scattering. Adv. Opt. Mater. 6, 1701167 (2018)10.1002/adom.201701167 ↗
11. P.Q. Wang, Z. Liu, K.C. Xu, D.J. Blackwood, M.H. Hong, A.G. Aberle, R. Stangl, I.M. Peters, Periodic upright nanopyramids for light management applications in ultrathin crystalline silicon solar cells. IEEE J. Photovolt. 7, 493–501 (2017)10.1109/JPHOTOV.2016.2641298 ↗
12. K.C. Xu, C.T. Zhang, R. Zhou, R. Ji, M.H. Hong, Hybrid micro/nano-structure formation by angular laser texturing of Si surface for surface enhanced Raman scattering. Opt. express. 24, 10352–10358 (2016)10.1364/OE.24.010352 ↗
13. K.C. Xu, R. Zhou, K. Takei, M.H. Hong, Toward flexible surface-enhanced Raman scattering(SERS) sensors for point-of-care diagnostics. Adv. Sci. 6, 1900925 (2019)10.1002/advs.201900925 ↗
14. K.C. Xu, Y.Y. Lu, S. Honda, T. Arie, S. Akita, K. Takei, Highly stable kirigami-structured stretchable strain sensors for perdurable wearable electronics. J. Mater. Chem. C. 7, 9609–9617 (2019)10.1039/C9TC01874C ↗
15. J. Subrahmanyam, M. Vijayakumar, Self-propagating high-temperature synthesis. J. Mater. Sci. 27, 6249–6273 (1992)10.1007/BF00576271 ↗
16. G. Kumar, K.N. Prabhu, Review of non-reactive and reactive wetting of liquids on surfaces. Adv. Colloid Interface. 133, 61–89 (2007)10.1016/j.cis.2007.04.009 ↗
17. C.W. Hirt, B.D. Nichols, Volume of fluid (VOF) method for the dynamics of free boundaries. J. Comput. Phys. 39, 201–225 (1981)10.1016/0021-9991(81)90145-5 ↗
18. S.F. Lunkad, V.V. Buwa, K.D.P. Nigam, Numerical simulations of drop impact and spreading on horizontal and inclined surfaces. Chem. Eng. Sci. 62(24), 7214–7224 (2007)10.1016/j.ces.2007.07.036 ↗
19. N. Malgarinos, M. Nikolopoulos, C. Marengo, M. Antonini, Gavaises, VOF simulations of the contact angle dynamics during the drop spreading: standard models and a new wetting force model. Adv. Colloid Interface 212, 1–20 (2014)10.1016/j.cis.2014.07.004 ↗
20. ŠIkalo S Wilhelm HD Roisman S IV Jakirlić C 2005 Tropea, dynamic contact angle of spreading droplets: experiments and simulations Phys. Fluids 17 06210310.1063/1.1928828 ↗