journal article·2016-12

Creation and transfer of gratings with designed spatially varying periodicity

Cuiping Zhang, Min Ji, Wenxin Shen, Haixiong Ge, Wen-Di Li

Applied Physics A· Volume 122· Issue 12
Publisher page

Abstract

Gratings with spatially varying periodicity have unique applications such as dispersive elements for compact spectrometers and spectrum splitting. However, large-area fabrication of spatially varying gratings, especially those featuring arbitrarily designed and accurate chirp factors, is challenging. In this paper, we develop a facile method that can arbitrarily modulate the spatial distribution of the periodicity in periodic patterns, by stretching shape-tailored elastomeric templates carrying the original periodic patterns and then transferring the deformed patterns onto rigid substrates. Periodicity-varying gratings transferred onto the rigid substrate were characterized by scanning electron microscopy to confirm the capability of our method on modifying and recording the spatial distribution of grating periodicity. As demonstration, we fabricated gratings with various chirp factors on stretched elastomeric molds and on rigid substrates, by varying processing parameters in our method. This work provides a low-cost and high-resolution fabrication technique for large-area chirped grating patterns and enables the exploration of practical applications of periodic structures with spatially varying periodicity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Photonic Crystals and Applications · Liquid Crystal Research Advancements · Optical Coatings and Gratings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. J. Wang, I. Glesk, L.R. Chen, Subwavelength grating devices in silicon photonics. Sci. Bull. 61(11), 879–888 (2016)10.1007/s11434-016-1077-z ↗
2. C. Holmes et al., Direct UV-written planar Bragg grating sensors. Meas. Sci. Technol. 26(11), 20 (2015)10.1088/0957-0233/26/11/112001 ↗
3. P. Bettini, E. Guerreschi, G. Sala, Development and experimental validation of a numerical tool for structural health and usage monitoring systems based on chirped grating sensors. Sensors 15(1), 1321–1341 (2015)10.3390/s150101321 ↗
4. Udd, E., et al. Ultrafast fiber grating sensor systems for velocity, position, pressure and temperature measurements, in SPIE Commercial + Scientific Sensing and Imaging. 2016. International Society for Optics and Photonics10.1117/12.2228309 ↗
5. P. Kanopoulos et al., Note: a concrete erosion sensor based on a chirped fibre optic Bragg grating. Rev. Sci. Instrum. 86(12), 126107 (2015)10.1063/1.4938177 ↗
6. G. Fortin, N. McCarthy, Chirped holographic grating used as the dispersive element in an optical spectrometer. Appl. Opt. 44(23), 4874–4883 (2005)10.1364/AO.44.004874 ↗
7. G. Kaur, G. Kaur, Mitigation of chromatic dispersion using different compensation methods in optical fiber communication: a review. Int. J. Eng. Manag. Res. 4(3), 21–25 (2014)
8. R. Kaur, M. Singh, Analysis on dispersion compensation with DCF based on optisystem—a review. Variations 6, 7 (2016)
9. V. Joshi, R. Mehra, An improvement in performance of optical communication system using linearly chirped apodized fiber Bragg grating, in Proceedings of International Conference on Ict for Sustainable Development, Ict4sd 2015, Vol 1, S.C. Satapathy, et al., Editors. 2016, Springer-Verlag Berlin: Berlin. p. 81–8810.1007/978-981-10-0129-1_9 ↗
10. C. Lu, R. Lipson, Interference lithography: a powerful tool for fabricating periodic structures. Laser Photonics Rev. 4(4), 568–580 (2010)10.1002/lpor.200810061 ↗
11. R. Steingrüber et al., Continuously chirped gratings for DFB-lasers fabricated by direct write electron-beam lithography. Microelectron. Eng. 61, 331–335 (2002)10.1016/S0167-9317(02)00517-8 ↗
12. J. Wang, L. Chen, Multichannel OADM using cascaded Bragg grating/Mach–Zehnder interferometers in SOI. Electron. Lett. 51(18), 1431–1433 (2015)10.1049/el.2015.1928 ↗
13. V.R. Manfrinato et al., Determining the resolution limits of electron-beam lithography: direct measurement of the point-spread function. Nano Lett. 14(8), 4406–4412 (2014)10.1021/nl5013773 ↗
14. L. Liu et al., A strain-tunable nanoimprint lithography for linear variable photonic crystal filters. Nanotechnology 27(29), 295301 (2016)10.1088/0957-4484/27/29/295301 ↗
15. Z. Li et al., Hybrid nanoimprint − soft lithography with sub-15 nm resolution. Nano Lett. 9(6), 2306–2310 (2009)10.1021/nl9004892 ↗
16. M. Qian et al., Tuning the period of nanogratings using mechanical stretching and nanoimprint lithography. Appl. Phys. A 122(6), 1–7 (2016)10.1007/s00339-016-0106-8 ↗
17. F. Schneider et al., Process and material properties of polydimethylsiloxane (PDMS) for Optical MEMS. Sens. Actuators A 151(2), 95–99 (2009)10.1016/j.sna.2009.01.026 ↗
18. Z. Wang, Polydimethylsiloxane mechanical properties measured by macroscopic compression and nanoindentation techniques, M.S. thesis, (University of South Florida, Florida, 2011)