journal article·2024-11Open access

Influences of ion bombardment, grain size, and gamma irradiation on surface topography, microstructural, and mechanical characteristics of Cu-2 wt% Sb alloy

H. N. Soliman, M. Sobhy

Applied Physics A· Volume 130· Issue 11

Abstract

Abstract The Cu-2 wt% Sb alloy was prepared and exposed to various heat treatments at temperatures ranging from 573 to 973 K to get distinct grain diameters. Different samples of various grain diameters were individually sputtered in an argon glow discharge for various times (0.5, 1, 2 h) using a DC magnetron sputtering device. The surface topography and microstructural features of a Cu-2 wt% Sb alloy were examined utilizing an optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD). The $$Cu3 Sb$$ IMC phase was found to segregate at the grain boundaries. Results showed that the topographical features of sputtered samples (grain boundaries, tiny cones, cratered cones, and etch pits) were mainly affected by grain size and sputtering time. Moreover, the mechanical properties of a Cu-2 wt% Sb alloy were examined. The parameters of the stress–strain curves (Young modulus Y, 0.2% offset stress σy0.2, fracture stress σf, parabolic work-hardening coefficient $${\upchi }_{{\text{p}}}$$, and ductility $${\upvarepsilon }_{{\text{f}}} {\text{\% }}$$) were measured under different testing conditions. Generally, these stress parameters decrease as the grain diameter increases. These parameters, with the exception of $${\upvarepsilon }_{{\text{f}}} {\text{\% }}$$, increase as the strain rate increases, while $${\upvarepsilon }_{{\text{f}}} {\text{ \% }}$$ decreases as the strain rate increases. Additionally, selective samples of the present alloy were irradiated using γ-radiation with different doses 0.5, 1, 1.5, and 2 MGy. The Vickers microhardness of annealed and irradiated samples lowered as the grain size augmented, while it increased as the irradiation dose increased. Based on the obtained activation energy Q value of 20.65 kJ/mol., it is indicated that the predominant deformation mechanism in the Cu-2 wt% Sb alloy is the motion of dislocation through the Cu-matrix.
Source: crossref · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ion-surface interactions and analysis · Fusion materials and technologies · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. L. Li, X. Du, J. Chen, Y. Wu, Thermal fatigue failure of micro-solder joints in electronic packaging devices: a review. Materials 17(10), 2365 (2024). https://doi.org/10.3390/ma1710236510.3390/ma17102365 ↗
2. T.T. Dele-Afolabi, M.N.M. Ansari, M.A. Azmah Hanim, A.A. Oyekanmi, O.J. Ojo-Kupoluyi, A. Atiqah, Recent advances in Sn-based lead-free solder interconnects for microelectronics packaging: materials and technologies. J. Mater. Res. Technol. 25, 4231–4263 (2023). https://doi.org/10.1016/j.jmrt.2023.06.19310.1016/j.jmrt.2023.06.193 ↗
3. S.H. Rajendran, D.H. Jung, J.P. Jung, Investigating the physical, mechanical, and reliability study of high entropy alloy reinforced Sn–3.0 Ag–0.5 Cu solder using 1608 chip capacitor/ENIG joints. J. Mater. Sci. Mater. Electron. 33(7), 3687–3710 (2022). https://doi.org/10.1007/s10854-021-07562-210.1007/s10854-021-07562-2 ↗
4. M. Zhao, L. Zhang, L. Sun, M.Y. Xiong, N. Jiang, K.K. Xu, Effects of nanoparticles on properties and interface reaction of Sn solder for microelectronic packaging. Int. J. Mod. Phys. B 34(8), 2050064 (2020). https://doi.org/10.1142/S021797922050064210.1142/S0217979220500642 ↗
5. T. Meiners, T. Frolov, R.E. Rudd, G. Dehm, C.H. Liebscher, Observations of grain-boundary phase transformations in an elemental metal. Nature 579(7799), 375–378 (2020). https://doi.org/10.1038/s41586-020-2082-610.1038/s41586-020-2082-6 ↗
6. P.R. Cantwell, M. Tang, S.J. Dillon, J. Luo, G.S. Rohrer, M.P. Harmer, Grain boundary complexions. Acta Mater. 62, 1–48 (2014). https://doi.org/10.1016/j.actamat.2013.07.03710.1016/j.actamat.2013.07.037 ↗
7. C.J. Marvel, B.C. Hornbuckle, K.A. Darling, M.P. Harmer, Intentional and unintentional elemental segregation to grain boundaries in a Ni-rich nanocrystalline alloy. J. Mater. Sci. 54, 3496–3508 (2019). https://doi.org/10.1007/s10853-018-3056-z10.1007/s10853-018-3056-z ↗
8. W. Ye, M. Misra, P. Menezes, L.T. Mushongera, Influence of grain boundary character on dopants segregation in nanocrystalline aluminum. Met. Mater. Int. 29(1), 18–26 (2023). https://doi.org/10.1007/s12540-022-01203-x10.1007/s12540-022-01203-x ↗
9. V. Devulapalli, M. Hans, P.T. Sukumar, J.M. Schneider, G. Dehm, C.H. Liebscher, Microstructure, grain boundary evolution and anisotropic Fe segregation in (0001) textured Ti thin films. Acta Mater. 238, 118180 (2022). https://doi.org/10.1016/j.actamat.2022.11818010.1016/j.actamat.2022.118180 ↗
10. H. Xue, Y. Wu, F. Tang, X. Li, X. Lu, J. Ren et al., Zirconium-enhanced segregation tendency of solutes X and Zr-X cosegregation induced synergistic/antagonistic effects on Ni Σ5 [001](210) grain boundary. Mater. Today Commun. 31, 103319 (2022). https://doi.org/10.1016/j.mtcomm.2022.10331910.1016/j.mtcomm.2022.103319 ↗
11. R.K. Rajgarhia, A. Saxena, D.E. Spearot, K.T. Hartwig, K.L. More, E.A. Kenik et al., Microstructural stability of copper with antimony dopants at grain boundaries: experiments and molecular dynamics simulations. J. Mater. Sci. 45, 6707–6718 (2010). https://doi.org/10.1007/s10853-010-4764-110.1007/s10853-010-4764-1 ↗
12. D. McLean, J. Inst. Met. 81 (1952–1953) 121–123
13. L.M.T. Hopkin, J. Inst. Met. 84 (1955–1956) 102–108
14. R. Monzen, O. Matsuda, H. Miura, Embrittlement of Cu [001] symmetric tilt boundaries induced by Sb segregation. Int. J. Mater. Res. 93, 840–844 (2022). https://doi.org/10.3139/ijmr-2002-014010.3139/ijmr-2002-0140 ↗
15. K.S. Yu, A. Joshi, W.D. Nix, A study of the chemical composition of grain boundaries and creep cavity surfaces in a Cu-Sb alloy. Metall. Trans. A 14, 2447–2454 (1983). https://doi.org/10.1007/BF0266888610.1007/BF02668886 ↗
16. Ch. Li, M. Watanabe, D.W. Ackland, D.B. Williams, Effect of rapid quenching on Sb grain-boundary segregation in Cu. Mater. Lett. 57, 1345–1350 (2003). https://doi.org/10.1016/S0167-577X(02)00985-010.1016/S0167-577X(02)00985-0 ↗
17. R.K. Rajgarhia, A. Saxena, D.E. Spearot et al., Microstructural stability of copper with antimony dopants at grain boundaries: experiments and molecular dynamics simulations. J. Mater. Sci. 45, 6707–6718 (2010). https://doi.org/10.1007/s10853-010-4764-110.1007/s10853-010-4764-1 ↗
18. T.H. Chuang, W. Gust, L.A. Hetdt, M.B. Hintz, S. Hofmann, R. Lucic, B. Predel, Observations of fracture surface chemistry on Cu-0.5at.%Sb bicrystals. Scr. Met. 16, 1437–1441 (1982). https://doi.org/10.1016/0036-9748(82)90442-210.1016/0036-9748(82)90442-2 ↗
19. S. Fürtauer, H. Flandorfer, A new experimental phase diagram investigation of Cu–Sb. Monatsh. Chem. 143, 1275–1287 (2012). https://doi.org/10.1007/s00706-012-0737-110.1007/s00706-012-0737-1 ↗
20. T.B. Massalski (Ed.), Binary Alloy Phase Diagrams, ASM International, Materials Park, OH, 1990.
21. J.M. Mosby, A.L. Prieto, Direct electrodeposition of Cu2Sb for lithium-ion battery anodes. J. Am. Chem. Soc. 130(32), 10656–10661 (2008). https://doi.org/10.1021/ja801745n10.1021/ja801745n ↗
22. J. Chen, Z. Yin, D. Sim, Y.Y. Tay, H. Zhang, J. Ma, H.H. Hng, Q. Yan, Controlled CVD growth of Cu–Sb alloy nanostructures. Nanotechnology 22(32), 325602 (2011). https://doi.org/10.1088/0957-4484/22/32/32560210.1088/0957-4484/22/32/325602 ↗
23. S. Hamdi, A. Hafs, T. Hafs, Cu–Sb solder alloy by combustion synthesis: structural characterization and magnetic properties. Int. J. Self Propag. High Temp. Synth. 30(1), 30–35 (2021). https://doi.org/10.3103/S106138622101004010.3103/S1061386221010040 ↗
24. F. Guo, H. Zheng, J. Qin, X. Qin, T. Lu, Y. Jia, R. Xu, X. Tian, Medium-range order and physical properties of Cu–20at.%Sb melts. J. Noncryst. Solids 358(23), 3327–3331 (2012). https://doi.org/10.1016/j.jnoncrysol.2012.09.00710.1016/j.jnoncrysol.2012.09.007 ↗
25. Maissel & Glang, Hand book of Thin Film Technology, (1970) p. 3–2
26. R. Garg, S. Gonuguntla, S. Sk, M.S. Iqbal, A.O. Dada, U. Pal, M. Ahmadipour, Sputtering thin films: Materials, applications, challenges and future directions. Adv. Coll. Interface. Sci. 330, 103203 (2024). https://doi.org/10.1016/j.cis.2024.10320310.1016/j.cis.2024.103203 ↗
27. A.A. Anber, J.F. Odah, M.M. Mawat, Novel applications using magnetron sputtering and atmospheric pressure plasma jet techniques: a review. Iraqi J. Nanotechnol. Synth. Appl. 4, 28–39 (2023). https://doi.org/10.47758/ijn.vi4.9810.47758/ijn.vi4.98 ↗
28. M. Kheradmandfard, O.V. Penkov, S.F. Kashani-Bozorg, J.S. Lee, Ch. Kim, M. Khadem, S. Cho, A.Z. Hanzaki, D, Kim, Exceptional improvement in the wear resistance of biomedical β-type titanium alloy with the use of a biocompatible multilayer Si/DLC nanocomposite coating. Ceram. Int. 48, 17376–17384 (2022). https://doi.org/10.1016/j.ceramint.2022.03.00210.1016/j.ceramint.2022.03.002 ↗
29. H. Gao, X. Yan, J. Niu, Y. Zhang, M. Song, Y. Shi, W. Ma, J. Qin, Zh. Zhang, Scalable structural refining via altering working pressure and in-situ electrochemically-driven Cu-Sb alloying of magnetron sputtered Sb anode in sodium ion batteries. Chem. Eng. J. 388, 124299 (2020). https://doi.org/10.1016/j.cej.2020.12429910.1016/j.cej.2020.124299 ↗
30. H. Mehmood, G. Bektaş, İ Yıldız, T. Tauqeer, H. Nasser, R. Turan, Electrical, optical and surface characterization of reactive RF magnetron sputtered molybdenum oxide films for solar cell applications. Mater. Sci. Semicond. Process. 101, 46–56 (2019). https://doi.org/10.1016/j.mssp.2019.05.01810.1016/j.mssp.2019.05.018 ↗
31. V.S. Bhati, S. Ranwa, M. Fanetti, M. Valant, M. Kumar, Efficient hydrogen sensor based on Ni-doped ZnO nanostructures by RF sputtering. Sens. Actuators B Chem. 255(1), 588–597 (2018). https://doi.org/10.1016/j.snb.2017.08.10610.1016/j.snb.2017.08.106 ↗
32. H.N. Soliman, A. Rizk, Effects of annealing temperatures on surface microtexturing and composition of Cu-10 wt% Ni-2 wt% Sn alloy due to Ar+ bombardment in a magnetron sputtering system. Curr. Sci. Int. 4, 216–224 (2015)
33. H.N. Soliman, A. Rizk, Surface structure, composition and hardenability of Cu-10Ni-2Al alloy developed in a magnetron sputtering system. Int. J. Res. Appl. Nat. Soc. Sci. 2, 49–58 (2014)
34. B.K. Parida, A. Kundu, K.S. Hazra et al., Anisotropic electrical conduction on ion induced nanorippled CoSi surface. Appl. Phys. A 127, 972 (2021). https://doi.org/10.1007/s00339-021-05117-010.1007/s00339-021-05117-0 ↗
35. Q. Guan, C. Hang, G. Yao, S. Li, D. Yu, Y. Ding, Y. Tian, Effect of gamma irradiation on microstructural evolution and mechanical properties of Sn3Ag0.5Cu solder joints. J. Mater. Res. Technol. 24, 6022–6033 (2023). https://doi.org/10.1016/j.jmrt.2023.04.14810.1016/j.jmrt.2023.04.148 ↗
36. N.R. Rahmat, W.Y.W. Yusoff, A. Jaler, A. Amat, I.A. Rahman, N.S.S. Ibrahim, Effect of gamma radiation on micromechanical behaviour of SAC305 solder. Solid State Phenom. 317, 535–540 (2021). https://doi.org/10.4028/www.scientific.net/SSP.317.53510.4028/www.scientific.net/SSP.317.535 ↗
37. P. Kumar, Study of gamma radiation induced hardening and embrittlement in commercial steel alloys—a brief review. J. Emerg. Technol. Innov. Res. 6, 1145–1149 (2019)
38. J.H. Wang, S.B. Xue, Z.P. Lu, H. Liu, L. Wen, Effect of gamma-ray irradiation on microstructure and mechanical property of Sn63Pb37 solder joints. J. Mater. Sci. Mater. Electron. 29, 20726–20733 (2018). https://doi.org/10.1007/s10854-018-0213-810.1007/s10854-018-0213-8 ↗
39. G. Graiss, G. Saad, A. Fawzy, M.A. Kenawy, Gzechoslovak. J. Phys. 41, 149 (1991)
40. P. Max Hansen and rer. nat. Kurt Anderko, Constitution of Binary Alloys, McGraw-Hill Book Company, Inc. New York, (1958), p. 62210.1149/1.2428700 ↗
41. G. Petzow, Metallographic etching. Am. Soc. Met. 59, 61 (1978)
42. J.E. Burke, The formation of annealing twins. J. Met. 2, 1324–1328 (1950). https://doi.org/10.1007/BF0339915710.1007/BF03399157 ↗
43. N. Bozzolo, M. Bernacki, Viewpoint on the formation and evolution of annealing twins during thermomechanical processing of FCC metals and alloys. Metall. Mater. Trans. A 51, 2665–2684 (2020). https://doi.org/10.1007/s11661-020-05772-710.1007/s11661-020-05772-7 ↗
44. G. Saad, S.A. Fayek, A. Fawzy, H.N. Soliman, Gh. Mohammed, Deformation characteristics of Al-4043 alloy. Mater. Sci. Eng. A 527, 904–910 (2010). https://doi.org/10.1016/j.msea.2009.09.01810.1016/j.msea.2009.09.018 ↗
45. R.E. Smallman, R.J. Bishop, Metals and Materials (Butterworth-Heinemann, Ltd, Oxford, 1995), p. 136, 138, 150, 156.
46. A. Rizk, S.B. Youssef, S.K. Habib, Glow discharge characteristics when magnetron sputtering copper in different plasma atmospheres operated at low input power. Vacuum 38, 93–95 (1988). https://doi.org/10.1016/0042-207X(88)90603-310.1016/0042-207X(88)90603-3 ↗
47. "Metallurgy for Engineers", E.C. Rollason, Edward Arnold (Publisher) Ltd. (1973), p. 314
48. R.A. Higgins, Engineering Metallurgy, Part 1, Fifth Edition (Hodder & Stoughton Ltd. U.K, 1984), p. 400.
49. F. Lang, H. Tanaka, O. Munegata, T. Taguchi, T. Narita, The effect of strain rate and temperature on the tensile properties of Sn–3.5Ag solder. Mater Charact 54, 223–229 (2005). https://doi.org/10.1016/j.matchar.2004.11.01310.1016/j.matchar.2004.11.013 ↗
50. S. Uddin, Md.A. Gafur, M.O. Rahman, Effect of strain rate on tensile behavior of Sn-9Zn-xAg-ySb; (x, y) = (0.2, 0.6), (0.2, 0.8), (0.6, 0.2), (0.8, 0.2) lead-free solder alloys. Mater. Sci. Appl. 14(4), 273–283 (2023). https://doi.org/10.4236/msa.2023.14401610.4236/msa.2023.144016 ↗
51. M. Farjamfar, S.M. Zebarjad, M.E. Bahrololoom, R. Bazargan-Lari, The effect of strain rate on the tensile properties of PMMA/hydroxyapatite composite. Iran. J. Mater. Form. 10(2), 35–43 (2023). https://doi.org/10.22099/IJMF.2023.47001.125410.22099/IJMF.2023.47001.1254 ↗
52. D. Xu, G. Zheng, Z. Qi, Y. Chen, B. Zhou, B. Wang, Y. Feng, G. Chen, Effect of strain rate on microstructure and mechanical properties of martensitic steel, 1st International Conference on Mechanical System Dynamics (ICMSD, 2022). https://doi.org/10.1049/icp.2022.199510.1049/icp.2022.1995 ↗
53. J.T. Benzing, W.A. Poling, D.T. Pierce, J. Bentley, K.O. Findley, D. Raabe, J.E. Wittig, Effects of strain rate on mechanical properties and deformation behavior of an austenitic Fe-25Mn-3Al-3Si TWIP-TRIP steel. Mater. Sci. Eng. A 711, 78–92 (2018). https://doi.org/10.1016/j.msea.2017.11.01710.1016/j.msea.2017.11.017 ↗
54. N.F. Mott, A theory of work-hardening of metal crystals. Philos. Mag. 43, 1151–1178 (1952). https://doi.org/10.1080/1478644110852102410.1080/14786441108521024 ↗
55. W.F. Hosford, Mechanical Behavior of Materials (Cambridge University Press, New York, 2005)10.1017/CBO9780511810930 ↗
56. R.W. Hertzberg, Deformation and Fracture Mechanics of Engineering Materials, 4th edn. (Wiley, New York, 1996)
57. G.E. Dieter, Mechanical Metallurgy, 3rd edn. (McGraw-Hill, Cambridge, 1986), p.297
58. T. Doğan, S. Gündüz, 2nd International Turkish World Engineering and Science Congress (November 7–10, Turkey, 2010).
59. X. Zhang, N. Hansen, Y. Gao, X. Huang, Acta Mater. 60, 5933 (2012)10.1016/j.actamat.2012.07.037 ↗
60. A. Fawzy, M. Sobhy, Effect of grain diameter on the work-hardening characteristics of Zn–1 wt% Cu alloy during phase transformation. Mater Charact 58, 122–131 (2007). https://doi.org/10.1016/j.matchar.2006.04.01610.1016/j.matchar.2006.04.016 ↗
61. M. Ahmed, T. Fouzder, A. Sharif, Influence of Ag micro-particle additions on the microstructure, hardness and tensile properties of Sn-9Zn binary eutectic solder alloy. Microelectron. Reliab. 50, 1134–1141 (2010). https://doi.org/10.1016/j.microrel.2010.03.01710.1016/j.microrel.2010.03.017 ↗
62. N. Hansen, Hall-Petch relation and boundary strengthening. Scr. Mater. 51, 801–806 (2004). https://doi.org/10.1016/j.scriptamat.2004.06.00210.1016/j.scriptamat.2004.06.002 ↗
63. W.Y.W. Yusoff, N.F.N.M. Lehan, N.S. Sobri, K.Z.K. Ahmad, A. Jalar, I.A. Rahman, Influences of low dose gamma radiation on hardness and microstructure properties of green solder joint. J. Phys. Conf. Ser. 1816, 012118 (2020). https://doi.org/10.1088/1742-6596/1816/1/01211810.1088/1742-6596/1816/1/012118 ↗
64. W. Paulus, I.A. Rahman, A. Jalar, I. Kamil, W.Y.W. Yusoff, M.A. Bakar, Effect of gamma radiation on micromechanical hardness of lead-free solder joint. AIP Conf. Proc. 1678, 040018 (2015). https://doi.org/10.1063/1.493127510.1063/1.4931275 ↗
65. W.Y.W. Yusoff, R. Ismail, A. Jalar, N.K. Othman, I.A. Rahman, Microstructural evolution and micromechanical properties of gamma-irradiated Au ball bonds. Mater Char 93, 129–135 (2014). https://doi.org/10.1016/j.matchar.2014.03.02410.1016/j.matchar.2014.03.024 ↗