journal article·2025-12

Effect of neodymium addition on the structural, mechanical, and magnetic properties of FeCoNiCu(MnCr)0.5 high entropy alloys

Nihal Yayla, Telem Şimşek, Mustafa Boyrazlı, Ömer Güler

Applied Physics A· Volume 131· Issue 12
Publisher page

Abstract

Neodymium (Nd), a rare earth element, was incorporated into the [FeCoNiCu(MnCr)0.5] high-entropy alloy (HEA) at weight percentages of 0.5%, 1%, 2%, and 5%. The alloys were synthesized successfully using the arc melting method. X-ray diffraction (XRD) analysis confirmed that both the undoped and Nd-doped alloys exhibit a single-phase solid solution with a face-centered cubic (FCC) crystal structure, consistent with thermodynamic predictions derived from the Miedema model. Scanning electron microscopy (SEM) revealed a dendritic structure in the undoped alloy, which was replaced by Cu- and Cr-rich regions in the 5% Nd-doped alloy, as confirmed by energy dispersive spectroscopy (EDS). Differential scanning calorimetry (DSC) indicated an endothermic peak in the undoped alloy and minor thermal responses in Nd-doped samples, without distinct phase transitions within the 0-800 degrees C range. Mechanical testing demonstrated substantial enhancements in both hardness and tensile strength with increasing Nd content. The 5% Nd-doped alloy exhibited the highest performance, achieving a Vickers hardness of 370 HV and a tensile strength of 1186 MPa. Magnetic testing indicated ferromagnetic behavior in all samples, with Nd additions significantly enhancing magnetic properties. Notably, the 5% Nd-doped alloy achieved a saturation magnetization (Ms) of 41 emu/g and a coercivity (Hc) of 6.3 Oe, highlighting improved magnetic softness and rapid magnetization loss characteristic of soft magnetic materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (97)

Show source-provided references
1. Q. He et al., Design of high-entropy alloy: a perspective from nonideal mixing. JOM 69, 2092–2098 (2017)10.1007/s11837-017-2452-1 ↗
2. H. Inui, K. Kishida, Z. Chen, Recent progress in our Understanding of phase stability, atomic structures and mechanical and functional properties of high-entropy alloys. Mater. Trans. 63(3), 394–401 (2022)10.2320/matertrans.MT-M2021234 ↗
3. R. Motallebi, Z. Savaedi, H. Mirzadeh, Superplasticity of high-entropy alloys: a review. Arch. Civ. Mech. Eng. 22, 1–14 (2022)
4. I. Baker, B. Cantor, J.-W. Yeh, High entropy alloys and materials. High Entropy Alloys & Materials 1(1), 1–3 (2023)10.1007/s44210-023-00019-7 ↗
5. E.P. George, W.A. Curtin, C.C. Tasan, High entropy alloys: a focused review of mechanical properties and deformation mechanisms. Acta Mater. 188, 435–474 (2020)10.1016/j.actamat.2019.12.015 ↗
6. J.-T. Ren et al., High-entropy alloys in electrocatalysis: from fundamentals to applications. Chem. Soc. Rev. (2023). https://doi.org/10.1039/D3CS00557G10.1039/D3CS00557G ↗
7. C.-H. Yeh et al., High-entropy alloys as magnetic shielding materials in low-frequency wireless power transmission. Mater. Today Adv. 24, 100540 (2024)10.1016/j.mtadv.2024.100540 ↗
8. W. Li et al., Mechanical behavior of high-entropy alloys. Prog. Mater. Sci. 118, 100777 (2021)10.1016/j.pmatsci.2021.100777 ↗
9. D.B. Miracle, O.N. Senkov, A critical review of high entropy alloys and related concepts. Acta Mater. 122, 448–511 (2017)10.1016/j.actamat.2016.08.081 ↗
10. W. Xiong et al., Refractory high-entropy alloys: a focused review of preparation methods and properties. J. Mater. Sci. Technol. 142, 196–215 (2023)10.1016/j.jmst.2022.08.046 ↗
11. B. Cantor et al., Microstructural development in equiatomic multicomponent alloys. Mater. Sci. Engineering: A 375, 213–218 (2004)10.1016/j.msea.2003.10.257 ↗
12. I. Basu, J.T.M. De Hosson, Strengthening mechanisms in high entropy alloys: fundamental issues. Scripta Mater. 187, 148–156 (2020)10.1016/j.scriptamat.2020.06.019 ↗
13. Y. Zhang et al., Microstructures and properties of high-entropy alloys. Prog. Mater. Sci. 61, 1–93 (2014)10.1016/j.pmatsci.2013.10.001 ↗
14. E.P. George, D. Raabe, R.O. Ritchie, High-entropy alloys. Nat. Rev. Mater. 4(8), 515–534 (2019)10.1038/s41578-019-0121-4 ↗
15. B. Yu et al., Recent progress in high-entropy alloys: a focused review of preparation processes and properties. J. Mater. Res. Technol. (2024). https://doi.org/10.1016/j.jmrt.2024.01.24610.1016/j.jmrt.2024.01.246 ↗
16. Z.-S. Nong, J.-C. Zhu, R.-D. Zhao, Prediction of structure and elastic properties of AlCrFeNiTi system high entropy alloys. Intermetallics 86, 134–146 (2017)10.1016/j.intermet.2017.03.014 ↗
17. X. Yang, Y. Zhang, Prediction of high-entropy stabilized solid-solution in multi-component alloys. Mater. Chem. Phys. 132(2–3), 233–238 (2012)10.1016/j.matchemphys.2011.11.021 ↗
18. U. Anamu et al., Fundamental design strategies for advancing the development of high entropy alloys for thermo-mechanical application: a critical review. J. Mater. Res. Technol. (2023). https://doi.org/10.1016/j.jmrt.2023.11.00810.1016/j.jmrt.2023.11.008 ↗
19. X. Du et al., Enhance the mechanical properties of CoCrFeNi high entropy alloy: rare-earth element Gd was employed as a cladding structure to refine grains. Mater. Today Commun. (2024). https://doi.org/10.1016/j.mtcomm.2024.11073210.1016/j.mtcomm.2024.110732 ↗
20. W.-L. Hsu et al., Clarifying the four core effects of high-entropy materials. Nat. Reviews Chem. pp. 1–15 (2024)
21. L. Rosenkranz et al., Tensile behavior of hexagonal rare-earth-based low, medium, and high entropy alloys: strengthening effect of configurational entropy. Intermetallics 155, 107835 (2023)10.1016/j.intermet.2023.107835 ↗
22. H.-C. Liu, C.-W. Tsai, Effect of ge addition on the microstructure, mechanical properties, and corrosion behavior of CoCrFeNi high-entropy alloys. Intermetallics. 132, 107167 (2021)10.1016/j.intermet.2021.107167 ↗
23. H. Hu et al., High temperature oxidation behavior of the dual-phase AlCoCr0. 5Fe2. 5Ni2. 5 and single phase Al0. 25CoCrFeNi high entropy alloys. Intermetallics 176, 108553 (2025)10.1016/j.intermet.2024.108553 ↗
24. P. Rasoulnia, R. Barthen, A.-M. Lakaniemi, A critical review of bioleaching of rare Earth elements: the mechanisms and effect of process parameters. Crit. Rev. Environ. Sci. Technol. 51(4), 378–427 (2021)10.1080/10643389.2020.1727718 ↗
25. T. Xu et al., Green recovery of rare Earth elements under sustainability and low carbon: a review of current challenges and opportunities. Sep. Purif. Technol. 330, 125501 (2024)10.1016/j.seppur.2023.125501 ↗
26. S. Zhang et al., Rare-earth incorporated alloy catalysts: synthesis, properties, and applications. Adv. Mater. 33(16), 2005988 (2021)10.1002/adma.202005988 ↗
27. V. Baranovskaya et al., Actual trends in the application of rare-earth metals and their compounds in the production of magnetic and luminescent materials: a review. Russ. J. Non-Ferr. Met. 62, 10–31 (2021)10.3103/S1067821221010041 ↗
28. S. Mokhliss et al., Low-temperature catalytic oxidation of ethanol over doped nickel phosphates. Environ. Sci. Pollut. Res. 32(5), 2606–2623 (2025)10.1007/s11356-024-35856-5 ↗
29. S. Cheng et al., Recent process developments in beneficiation and metallurgy of rare earths: a review. J. Rare Earths 42(4), 629–642 (2024)10.1016/j.jre.2023.03.017 ↗
30. A. Bhattarai et al., Recovery of Rare Earth Elements (REEs) from Different Sources of E-waste and Their Potential Applications: A Critical Review (2024)10.20944/preprints202404.1659.v1 ↗
31. R.R. Reddy, Prospective Potential Applications and Emerging Tendencies in Rare Earth Materials. Rare Earth: A tribute to the late Mr. Rare Earth Professor Karl Gschneidner. 164, 177–210 (2024)10.21741/9781644903056-4 ↗
32. H. Fu et al., High-entropy rare earth materials: synthesis, application and outlook. Chem. Soc. Rev. (2024). https://doi.org/10.1039/D2CS01030E10.1039/D2CS01030E ↗
33. V. Gromov et al., Application of high-entropy alloys. Steel in Translation 51(10), 700–704 (2021)10.3103/S096709122110003X ↗
34. L. Meng et al., Microstructure and properties of typical equiatomic crmnfeconi high entropy alloy doped with different rare earth elements. Intermetallics 175, 108477 (2024)10.1016/j.intermet.2024.108477 ↗
35. S. Uporov et al., Magnetocaloric effect in ScGdTbDyHo high-entropy alloy: impact of synthesis route. Intermetallics 151, 107678 (2022)10.1016/j.intermet.2022.107678 ↗
36. S. Mokhliss et al., Theoretical and experimental investigation of ZrO2 incorporated in nickel phosphate matrix for hydrogen production: Catalytic efficiency and electronic properties. Vacuum, 2025: p. 11468510.1016/j.vacuum.2025.114685 ↗
37. P.K. Sarswat et al., Additive manufactured new hybrid high entropy alloys derived from the AlCoFeNiSmTiVZr system. Appl. Surf. Sci. 476, 242–258 (2019)10.1016/j.apsusc.2018.12.300 ↗
38. F. He et al., Phase separation of metastable CoCrFeNi high entropy alloy at intermediate temperatures. Scripta Mater. 126, 15–19 (2017)10.1016/j.scriptamat.2016.08.008 ↗
39. Ö. Güler et al., Oxides dispersion-strengthened (ODS) FeCoNiCuZn high entropy alloys through different rare Earth elements: synthesis, structural, physical, and experimental radiation transmission properties. Ceram. Int. 49(22), 35021–35033 (2023)10.1016/j.ceramint.2023.08.176 ↗
40. C. Wang et al., Hardness and strength enhancements of CoCrFeMnNi high-entropy alloy with Nd doping. Materials Science and Engineering: A 764, 138192 (2019)10.1016/j.msea.2019.138192 ↗
41. J. Zhu et al., Effect of neodymium and yttrium addition on microstructure and DC soft magnetic property of dual-phase feconi (CuAl) 0.8 high-entropy alloy. J. Rare Earths 41(10), 1562–1567 (2023)10.1016/j.jre.2022.06.005 ↗
42. H.-W. Peng, C.-H. Hsueh, Effects of silicon and neodymium additions on microstructures and mechanical properties of CoCrNi medium entropy alloy films. Surf. Coat. Technol. 476, 130206 (2024)10.1016/j.surfcoat.2023.130206 ↗
43. V. Zepf, Rare Earth Elements: a New Approach To the Nexus of supply, Demand and Use: Exemplified along the Use of Neodymium in Permanent Magnets (Springer Science & Business Media) (2013)10.1007/978-3-642-35458-8 ↗
44. M.E. McHenry, D.E. Laughlin, Magnetic Properties of Metals and alloys, in Physical Metallurgy (Elsevier), pp. 1881–2008 (2014)10.1016/B978-0-444-53770-6.00019-8 ↗
45. D. Talan, Q. Huang, A review of environmental aspect of rare Earth element extraction processes and solution purification techniques. Miner. Eng. 179, 107430 (2022)10.1016/j.mineng.2022.107430 ↗
46. J.-R. Riba et al., Rare-earth-free propulsion motors for electric vehicles: a technology review. Renew. Sustain. Energy Rev. 57, 367–379 (2016)10.1016/j.rser.2015.12.121 ↗
47. B. Xiao et al., Geochemical characteristics of soil rare earth elements within spontaneous combustion coalfields of Rujigou coal mine. Minerals 14(6), 592 (2024)10.3390/min14060592 ↗
48. S. Gražulis et al., Crystallography open database (COD): an open-access collection of crystal structures and platform for world-wide collaboration. Nucleic Acids Res. 40(D1), D420–D427 (2012)10.1093/nar/gkr900 ↗
49. A. Vaitkus, A. Merkys, S. Gražulis, Validation of the crystallography open database using the crystallographic information framework. J. Appl. Crystallogr. 54(2), 661–672 (2021)10.1107/S1600576720016532 ↗
50. L. Zhang et al., Microstructure and mechanical behaviors of GdxCoCrCuFeNi high-entropy alloys. Materials Science and Engineering: A 707, 708–716 (2017)10.1016/j.msea.2017.09.102 ↗
51. C. Li et al., Modification and verification of miedema model for predicating thermodynamic properties of binary precipitates in multi-element alloys. Physica B: Condensed Matter 627, 413540 (2022)10.1016/j.physb.2021.413540 ↗
52. N. Das et al., Miedema model based methodology to predict amorphous-forming-composition range in binary and ternary systems. J. Alloys Compd. 550, 483–495 (2013)10.1016/j.jallcom.2012.10.124 ↗
53. R. Zhang et al., Miedema calculator: A thermodynamic platform for predicting formation enthalpies of alloys within framework of miedema’s theory. Comput. Phys. Commun. 209, 58–69 (2016)10.1016/j.cpc.2016.08.013 ↗
54. B.S. Murty et al., High-entropy Alloys (Elsevier) (2019)10.1016/B978-0-12-816067-1.00009-6 ↗
55. J.-W. Yeh, Physical metallurgy of high-entropy alloys. JOM 67(10), 2254–2261 (2015)10.1007/s11837-015-1583-5 ↗
56. J.W. Yeh et al., High-entropy alloys–a new era of exploitation. Materials Science Forum. Trans. Tech. Publ. (2007)10.4028/0-87849-446-4.1 ↗
57. K. Yin et al., Prediction of phase stabilities of solid solutions for high entropy alloys. Acta Mater. 263, 119445 (2024)10.1016/j.actamat.2023.119445 ↗
58. F. Tian et al., Empirical design of single phase high-entropy alloys with high hardness. Intermetallics 58, 1–6 (2015)10.1016/j.intermet.2014.10.010 ↗
59. P. Guzman et al., Tribocorrosion behavior of niobium-based thin films for biomedical applications. Tribol. Ind. 40(4), 624 (2018)10.24874/ti.2018.40.04.09 ↗
60. S. Gražulis et al., Crystallography open database–an open-access collection of crystal structures. J. Appl. Crystallogr. 42(4), 726–729 (2009)10.1107/S0021889809016690 ↗
61. Y. Zhang et al., High-entropy alloys with high saturation magnetization, electrical resistivity and malleability. Sci. Rep. 3(1), 1455 (2013)10.1038/srep01455 ↗
62. P. Sathiyamoorthi et al., Thermal stability and grain boundary strengthening in ultrafine-grained CoCrFeNi high entropy alloy composite. Mater. Des. 134, 426–433 (2017)10.1016/j.matdes.2017.08.053 ↗
63. W. Dong et al., Effects of Y, GdCu, and al addition on the thermoelectric behavior of CoCrFeNi high entropy alloys. Metals 8(10), 781 (2018)10.3390/met8100781 ↗
64. T.-T. Shun, C.-H. Hung, C.-F. Lee, Formation of ordered/disordered nanoparticles in FCC high entropy alloys. J. Alloys Compd. 493(1–2), 105–109 (2010)10.1016/j.jallcom.2009.12.071 ↗
65. S. Shi et al., Optimization of magnetic domain structure and soft magnetic properties of FeCoNiGd medium-entropy alloys by gadolinium addition. J. Alloys Compd. 970, 172654 (2024)10.1016/j.jallcom.2023.172654 ↗
66. T. Şimşek et al., FeCoNiMnCr high-entropy alloys (HEAs): Synthesis, structural, magnetic and nuclear radiation absorption properties. Ceram. Int. 49(15), 25364–25370 (2023)10.1016/j.ceramint.2023.05.072 ↗
67. S. Konovalov et al., Evolution of microstructure, mechanical properties and phase stability of CoCrFeMnNi high entropy alloys. Vacuum 227, 113405 (2024)10.1016/j.vacuum.2024.113405 ↗
68. S.A. Speakman, Estimating crystallite size using XRD. MIT Cent. Mater. Sci. Eng. 2(14), 03–08 (2014)
69. A.B.P. Lever, Fundamentals: Physical methods, Theoretical analysis, and Case Studies (No Title) (2004)
70. H. Zheng et al., Microstructure evolution, Cu segregation and tensile properties of CoCrFeNiCu high entropy alloy during directional solidification. J. Mater. Sci. Technol. 38, 19–27 (2020)10.1016/j.jmst.2019.08.019 ↗
71. T. Abid et al., Design and development of porous CoCrFeNiMn high entropy alloy (Cantor alloy) with outstanding electrochemical properties. J. Alloys Compd. 970, 172633 (2024)10.1016/j.jallcom.2023.172633 ↗
72. L. Zhang et al., Effects of rare-earth element, Y, additions on the microstructure and mechanical properties of CoCrFeNi high entropy alloy. Materials Science and Engineering: A 725, 437–446 (2018)10.1016/j.msea.2018.04.058 ↗
73. J. Fan et al., A novel high-entropy alloy with a dendrite-composite microstructure and remarkable compression performance. Scripta Mater. 159, 18–23 (2019)10.1016/j.scriptamat.2018.09.008 ↗
74. H. Wu et al., Influence of cr content on the microstructure and mechanical properties of CrxFeNiCu high entropy alloys. Prog. Nat. Sci. Mater. Int. 30(2), 239–245 (2020)10.1016/j.pnsc.2020.01.012 ↗
75. T. Sonar et al., An overview of microstructure, mechanical properties and processing of high entropy alloys and its future perspectives in aeroengine applications. Mater. Sci. Energy Technol. 7, 35–60 (2024)
76. T. Zhang et al., Improvement of coercivity and its thermal stability of hot-deformed Nd-Fe-B magnets processed by Tb70Cu30 doping and subsequent Nd85Cu15 diffusion. Acta Mater. 220, 117296 (2021)10.1016/j.actamat.2021.117296 ↗
77. T.-H. Kim et al., Effects of Al/Cu co-doping on crystal structure and chemical composition of Nd-rich phases in Nd-Fe-B sintered magnet. Acta Mater. 133, 200–207 (2017)10.1016/j.actamat.2017.05.046 ↗
78. C. Li et al., Rare-earth-tantalate high-entropy ceramics with sluggish grain growth and low thermal conductivity. Ceram. Int. 48(8), 11124–11133 (2022)10.1016/j.ceramint.2021.12.332 ↗
79. X. Guo et al., High-entropy rare-earth disilicate (Lu0. 2Yb0. 2Er0. 2Tm0. 2Sc0. 2) 2Si2O7: a potential environmental barrier coating material. J. Eur. Ceram. Soc. 42(8), 3570–3578 (2022)10.1016/j.jeurceramsoc.2022.03.006 ↗
80. D. Liu et al., Sm0. 2Eu0. 2Tb0. 2Dy0. 2Lu0. 2) 2Si2O7: A novel high-entropy rare earth disilicate porous ceramics with high porosity and low thermal conductivity. Mater. Chem. Phys. 286, 126181 (2022)10.1016/j.matchemphys.2022.126181 ↗
81. Y. Ma, X. Zhao, F. Hong, Regulating the thermophysical properties of rare Earth cerates through high entropy design and substitute. J. Eur. Ceram. Soc. 44(15), 116777 (2024)10.1016/j.jeurceramsoc.2024.116777 ↗
82. K. Singh, S. Sharma, Effect of neodymium oxide on microstructure, hardness and abrasive wear behaviour of microwave clads. Mater. Res. Express 6(8), 086599 (2019)10.1088/2053-1591/ab2266 ↗
83. M. Mazur et al., Effect of Nd doping on structure and improvement of the properties of TiO2 thin films. Surf. Coat. Technol. 270, 57–65 (2015)10.1016/j.surfcoat.2015.03.019 ↗
84. Q. Tang et al., The effects of neodymium addition on the intermetallic microstructure and mechanical properties of Al-7Si-0.3 Mg-0.3 Fe alloys. J. Alloys Compd. 741, 161–173 (2018)10.1016/j.jallcom.2018.01.138 ↗
85. M.-H. Tsai, J.-W. Yeh, High-entropy alloys: a critical review. Mater. Res. Lett. 2(3), 107–123 (2014)10.1080/21663831.2014.912690 ↗
86. B. Gludovatz, E.P. George, R.O. Ritchie, Processing, microstructure and mechanical properties of the crmnfeconi high-entropy alloy. JOM 67, 2262–2270 (2015)10.1007/s11837-015-1589-z ↗
87. W. Xiaofeng, W. Fufa, W. Zhe, Influence of neodymium addition on microstructure, tensile properties and fracture behavior of cast Al-Mg2Si metal matrix composite. J. Rare Earths 31(3), 307–312 (2013)10.1016/S1002-0721(12)60277-4 ↗
88. Y.-S. Lin, Y.-C. Lu, C.-H. Hsueh, Strengthening of CoCrNi medium entropy alloy with gadolinium additions. Vacuum 211, 111969 (2023)10.1016/j.vacuum.2023.111969 ↗
89. L. Mustafi et al., Effect of Oxygen on the microstructure, Tensile Properties and Deformation Behaviours of a Biocompatible Ti40Zr25Nb25Ta10 High Entropy Alloy (Journal of Materials Science & Technology) (2024)10.1016/j.jmst.2024.06.022 ↗
90. S. Sinha et al., Deformation mechanisms and ductile fracture characteristics of a friction stir processed transformative high entropy alloy. Acta Mater. 184, 164–178 (2020)10.1016/j.actamat.2019.11.056 ↗
91. W. Li, P.K. Liaw, Y. Gao, Fracture resistance of high entropy alloys: A review. Intermetallics. 99, 69–83 (2018)10.1016/j.intermet.2018.05.013 ↗
92. S. Fang et al., Mechanism of Gd doping on microstructure and mechanical properties of FeCrNiCuTi0. 4 high entropy alloy. J. Alloys Compd. 1003, 175699 (2024)10.1016/j.jallcom.2024.175699 ↗
93. P. Kumari et al., A comprehensive review: recent progress on magnetic high entropy alloys and oxides. J. Magn. Magn. Mater. 554, 169142 (2022)10.1016/j.jmmm.2022.169142 ↗
94. C. Dou et al., Novel Fe1. 1Co1. 1 (CrAlx) 1.8 Gd0. 1 high-entropy alloy absorber: noticeable ferromagnetic transformation and enhanced magnetic loss. J. Alloys Compd. (2024). https://doi.org/10.1016/j.jallcom.2024.17598110.1016/j.jallcom.2024.175981 ↗
95. M. Nishino, I.E. Uysal, S. Miyashita, Effect of the surface magnetic anisotropy of neodymium atoms on the coercivity in neodymium permanent magnets. Phys. Rev. B 103(1), 014418 (2021)10.1103/PhysRevB.103.014418 ↗
96. A. Nikzad, R. Parvizi, Presence of neodymium and gadolinium in Cobalt ferrite lattice: structural, magnetic and microwave features for electromagnetic wave absorbing. J. Rare Earths 38(4), 411–417 (2020)10.1016/j.jre.2019.06.010 ↗
97. E. Ahilandeswari, R.R. Kanna, K. Sakthipandi, Synthesis of neodymium-doped barium nanoferrite: analysis of structural, optical, morphological, and magnetic properties. Physica B: Condensed Matter 599, 412425 (2020)10.1016/j.physb.2020.412425 ↗