Nanostructured organic pn junctions towards 3D photovoltaics
Source abstract
Abstract
The working principle of so-called organic bulk heterojunction solar cells prepared with blends of poly(2-methoxy-5-(3’,7’-dimethyl-octyloxy))-p-phenylene vinylene (MDMO-PPV), acting as an electron donor, and (6,6)-phenyl-C61-butyric-acid methyl ester (PCBM) (a soluble C60 derivative), acting as electron acceptor, is based on the presence of three-dimensional nanostructured pn junctions and percolation paths for charge transport. At high PCBM contents, spontaneous phase separation occurs giving rise to PCBM-rich spherical/ellipsoidal regions (electron transport) embedded in a MDMO-PPV-rich matrix (hole transport). With transmission electron microscopy and scanning probe microscopy techniques it has been demonstrated that the size of the PCBM-rich region depends strongly on the preparation conditions such as solvents and drying conditions. The morphology of the active films in high-performance bulk heterojunction solar cells is characterized by a significantly higher number and a smaller size (nanoscale) of the PCBM-rich regions than for the low-performance cells. This morphology yields both an increase of the useful photoactive volume and an increase of the percolation paths for charge transport. Towards mature and high-performance organic-based three-dimensional photovoltaics, it is clear that besides mastering the electro-optical properties of the constituting materials it also of key importance to control the nanomorphology of the solid-state blends in order to obtain efficient interpenetrating pn networks.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. J. Nelson: Mater. Today, May, 20 (2002)10.1016/S1369-7021(02)05532-3 ↗
2. B. O’Regan, M. Grätzel: Nature 353, 737 (1991)10.1038/353737a0 ↗
3. N.S. Saritiftci, L. Smilowitz, A.J. Heeger, F. Wudl: Science 258, 1474 (1992)10.1126/science.258.5087.1474 ↗
4. J.C. Brabec, G. Zera, N.S. Saritiftci: Chem. Phys. Lett. 340, 232 (2001)10.1016/S0009-2614(01)00431-6 ↗
5. G. Yu, J. Gao, J.C. Hummelen: Science 270, 1789 (1995)10.1126/science.270.5243.1789 ↗
6. L.S. Roman, M.R. Andersson, T. Yohanms: Adv. Mater. 9, 1164 (1997)10.1002/adma.19970091508 ↗
7. S.E. Shaheen, C.J. Brabec, N.S. Saritiftci, F. Padinger, T. Fromherz, J.C. Hummelen: Appl. Phys. Lett. 78, 841–843 (2001)10.1063/1.1345834 ↗
8. T. Munters, T. Martens, L. Goris, V. Vrindts, J. Manca, L. Lutsen, W. De Ceunick, D. Vanderzande, L. De Schepper, J. Gelan, N.S. Sariciftci, C.J. Brabec: Thin Solid Films 403–404, 247 (2002)10.1016/S0040-6090(01)01562-0 ↗
9. F. Louwet, D. Vanderzande, J. Gelan, J. Mullens: Macromolecules 28, 1330 (1995)10.1021/ma00108a079 ↗
10. F. Louwet, D. Vanderzande, J. Gelan: Synth. Met. 52, 125 (1995)10.1016/0379-6779(92)90025-E ↗
11. F. Louwet, D. Vanderzande, J. Gelan: Synth. Met. 69, 509 (1995)10.1016/0379-6779(94)02548-D ↗
12. H. Spreitzer, H. Becker, E. Kluge, W. Kreuder, H. Schenck, R. Demandt, H. Schoo: Adv. Mater. 10, 1340 (1998)10.1002/(SICI)1521-4095(199811)10:16<1340::AID-ADMA1340>3.0.CO;2-G ↗
13. H.G. Gilch, W.L. Wheelwright: J. Polym. Sci. 4, 1337 (1966)10.1002/pol.1966.150040602 ↗
14. F. Padinger, R.S. Rittberger, N.S. Sariciftci: Adv. Funct. Mater. 13, 85 (2003)10.1002/adfm.200390011 ↗
15. T. Martens, J. D’Haen, T. Munters, Z. Beelen, L. Goris, J. Manca: Synth. Met. 138, 243 (2003)10.1016/S0379-6779(02)01311-5 ↗
16. T. Martens, Z. Beelen, J. D’Haen, T. Munters, L. Goris, J. Manca: SPIE Proc. 4801, 40 (2003)10.1117/12.452453 ↗
17. T. Martens, J. D’Haen, T. Munters, L. Goris, Z. Beelen, J. Manca: Mater. Res. Soc. Symp. Proc. 725, P7.11.1 (2002)10.1557/PROC-725-P7.11 ↗
18. J.C. Hummelen: private communication
19. W. Geens: PhD thesis, University of Antwerp/IMEC (2002)