Nanoindentation of carbon microfibers deposited by laser-assisted chemical vapor deposition
Source abstract
Abstract
Carbon microfibers were deposited using laser-assisted chemical vapor deposition at atmospheric and sub-atmospheric pressures. Precursor pressures and incident laser powers were varied. Fibers were cast in acrylic resin and polished to allow nanoindentation of the cross sections. Cross-sectional roughness was examined by optical profilometry. A radial change in mechanical properties was observed. The local elastic modulus (Young’s modulus) and hardness for the edge and core regions are reported. These mechanical properties were investigated with respect to deposition parameters and corresponding fiber microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Adhesion, Friction, and Surface Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. F.T. Wallenberger, P.C. Nordine, M. Boman: Comput. Sci. Technol. 51, 193 (1994)10.1016/0266-3538(94)90190-2 ↗
2. J.L. Maxwell, J. Pegna, D.V. Messia: Appl. Phys. A 67, 323 (1998)10.1007/s003390050778 ↗
3. D. Jean, C. Duty, R. Johnson, S. Bondi, W.J. Lackey: Carbon 40, 1435 (2002)10.1016/S0008-6223(01)00307-4 ↗
4. D. Bäuerle: Laser Processing and Chemistry, 2nd edn. (Springer, Berlin 1996)10.1007/978-3-662-03253-4 ↗
5. H. Westberg, M. Boman, A.-S. Norekrans, J.-O. Carlsson: Thin Solid Films 215, 126 (1992)10.1016/0040-6090(92)90426-C ↗
6. J. Pegna, D. Messia, W.H. Lee: in Solid Freeform Fabrication Symp. 1997, p. 49
7. K. Williams, J. Maxwell, K. Larsson, M. Boman: in Proc. 12th IEEE Int. Conf. Micro Electro Mechanical Systems (MEMS), Orlando, FL, USA, 1999, pp. 232–23710.1109/MEMSYS.1999.746821 ↗
8. M.S. Dresselhaus, G. Dresselhaus, K. Sugihara, I.-L. Spain, H.A. Goldberg: Graphite Fibers and Filaments (Springer Ser. Mater. Sci.) (Springer, Berlin 1988) p. 12210.1007/978-3-642-83379-3 ↗
9. C. Fauteux, J. Pegna: Appl. Phys. A (2003), DOI 10.1007/s00339-003-2084-x10.1007/s00339-003-2084-x ↗
10. E. Martínez, J. L Andújar, M.C. Polo, J. Esteve, J. Robertson, W.I. Milne: Diamond Relat. Mater. 10, 145 (2001)10.1016/S0925-9635(00)00461-1 ↗
11. M. Lindstam, O. Wänstrand, M. Boman, K. Piglmayer: Surf. Coat. Technol. 138, 264 (2001)10.1016/S0257-8972(00)01157-9 ↗
12. V.L. Solozhenko, S.N. Dub, N.V. Novikov: Diamond Relat. Mater. 10, 2228 (2001)10.1016/S0925-9635(01)00513-1 ↗
13. O. Takai, N. Tajima, H. Saze, H. Sugimura: Surf. Coat. Technol. 142–144, 719 (2001)10.1016/S0257-8972(01)01175-6 ↗
14. W.C. Oliver, G.M. Pharr: MRS Bull. 7, 1564 (1992)
15. C. Fauteux, R. Longtin, J. Pegna, M. Boman: J. Appl. Phys. (accepted November 26th, 2003, in press)
16. G. Leyendecker, D. Bäuerle, P. Geittner, H. Lydtin: Appl. Phys. Lett. 39, 921 (1981)10.1063/1.92607 ↗
17. G. Leyendecker, H. Noll, D. Bäuerle, P. Geittner, H. Lydtin: J. Electrochem. Soc. 130, 157 (1983)10.1149/1.2119645 ↗
18. F. Tuinstra, J.L. Koenig: J. Chem. Phys. 53, 1126 (1970)10.1063/1.1674108 ↗
19. L.S. Nelson, N.L. Richardson: Mater. Res. Bull. 7, 975 (1972)10.1016/0025-5408(72)90087-6 ↗