journal article·2008-06

Femtosecond pulsed laser damage characteristics of 7% Y2O3-ZrO2 thermal barrier coating

D.K. Das, J.P. McDonald, S.M. Yalisove, T.M. Pollock

Applied Physics A· Volume 91· Issue 3
Publisher page

Abstract

Ablation characteristics of 7% yttria stabilized zirconia thermal barrier coating, deposited by the electron beam physical vapor deposition method, was studied using a femtosecond pulsed laser. The single-pulse damage threshold fluence for the coating was determined to be 1.64 J cm-2. The threshold fluence was not appreciably dependent on the initial roughness of the coating surface. An incubation effect, i.e., a decrease in the damage threshold fluence with an increase in number of pulses incident at a given location, was observed for this coating. Based on the damage morphology generated by single and multi-pulse interactions, a mechanism for the incubation effect was proposed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Laser Material Processing Techniques · High-Temperature Coating Behaviors · Laser-induced spectroscopy and plasma

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. A.G. Evans, D.R. Mumm, H.W. Hutchinson, G.S. Meier, F.S. Pettit, Prog. Mater. Sci. 46, 505 (2001)10.1016/S0079-6425(00)00020-7 ↗
2. J.T. DeMasi-Marcin, D.K. Gupta, Surf. Coat. Technol. 68/69, 1 (1994)10.1016/0257-8972(94)90129-5 ↗
3. D.R. Clarke, C.G. Levi, Ann. Rev. Mater. Res. 33, 383 (2003)10.1146/annurev.matsci.33.011403.113718 ↗
4. B.M. Warnes, D.C. Punola, Surf. Coat. Technol. 94/95, 1 (1997)10.1016/S0257-8972(97)00467-2 ↗
5. D.K. Das, V. Singh, S.V. Joshi, Metall. Mater. Trans. A 31, 2037 (2000)10.1007/s11661-000-0231-y ↗
6. K.T. Voisey, T.W. Clyne, Surf. Coat. Technol. 176, 296 (2004)10.1016/S0257-8972(03)00748-5 ↗
7. C.Y. Yeo, S.C. Tam, S. Jana, Michael W.S. Lau, J. Mater. Process. Technol. 42, 15 (1994)10.1016/0924-0136(94)90073-6 ↗
8. A. Corcoran, L. Sexton, B. Seaman, P. Ryan, G. Byrne, J. Mater. Process. Technol. 123, 100 (2002)10.1016/S0924-0136(01)01123-2 ↗
9. S. Bandyopadhyay, J.K.S. Sundar, G. Sundararajan, S.V. Joshi, J. Mater. Process. Technol. 127, 83 (2002)10.1016/S0924-0136(02)00270-4 ↗
10. J. Kamalu, P. Byrd, A. Pitman, J. Mater. Process. Technol. 122, 355 (2002)10.1016/S0924-0136(02)00044-4 ↗
11. D.K.Y. Low, L. Li, P.J. Byrd, J. Mater. Process. Technol. 139, 71 (2003)10.1016/S0924-0136(03)00184-5 ↗
12. J. Krüger, W. Kautek, Laser Phys. 9, 30 (1999)
13. W. Kautek, J. Kruger, SPIE 2207, 600 (1994)
14. G. Kamlage, T. Bauer, A. Ostendorf, B.N. Chichkov, Appl. Phys. A 77, 307 (2003)10.1007/s00340-003-1172-0 ↗
15. P. Mannion, J. Magee, E. Coyne, G.M. O’Connor, SPIE 4876, 470 (2003)10.1117/12.463744 ↗
16. Q. Feng, Y.N. Picard, J.P. McDonald, P.A. Van Rompay, S.M. Yalisove, T.M. Pollock, Mater. Sci. Eng. A 430, 203 (2006)10.1016/j.msea.2006.05.104 ↗
17. J. Bonse, J.M. Wrobel, J. Kruger, W. Kautek, Appl. Phys. A 72, 89 (2001)10.1007/s003390000596 ↗
18. S. Ma, J.P. McDonald, B. Tryon, S.M. Yalisove, T.M. Pollock, Metall. Mater. Trans. A 38, 2349 (2007)10.1007/s11661-007-9260-0 ↗
19. Q. Wen, Q. Feng, G. Cheng, W. Zhao, Z. Sun, Mater. Sci. Forum 546–549, 1309 (2007)10.4028/www.scientific.net/MSF.546-549.1309 ↗
20. Y. Jee, M.F. Becker, R.M. Walser, J. Opt. Soc. Am. B 5, 648 (1988)10.1364/JOSAB.5.000648 ↗
21. D. Ashkenasi, M. Lorenz, R. Stoian, A. Rosenfeld, Appl. Surf. Sci. 150, 101 (1999)10.1016/S0169-4332(99)00228-7 ↗
22. A. Rosenfield, M. Lorenz, R. Stoian, D. Askenasi, Appl. Phys. A 69, S373 (1999)10.1007/s003390051419 ↗
23. J. Bonse, P. Rudolph, J. Kruger, S. Baudach, W. Kautek, Appl. Surf. Sci. 154/155, 659 (2000)10.1016/S0169-4332(99)00481-X ↗
24. S. Baudach, J. Bonse, J. Kruger, W. Kautek, Appl. Surf. Sci. 154/155, 555 (2000)10.1016/S0169-4332(99)00474-2 ↗
25. P.T. Mannion, J. Magee, E. Coyne, G.M. O’Connor, T.J. Glynn, Appl. Surf. Sci. 233, 275 (2004)10.1016/j.apsusc.2004.03.229 ↗
26. M. Mero, B. Clapp, J.C. Jasapara, W. Rudolph, D. Ristau, K. Starke, J. Kruger, S. Martin, W. Kautek, Opt. Eng. 44, 051107 (2005)10.1117/1.1905343 ↗
27. X.C. Wang, G.C. Lim, H.Y. Zheng, F.L. Ng, W. Liu, S.J. Chua, Appl. Surf. Sci. 228, 221 (2004)10.1016/j.apsusc.2004.01.009 ↗
28. C. Gorling, U. Leinhos, K. Mann, Opt. Commun. 216, 369 (2003)10.1016/S0030-4018(02)02344-1 ↗
29. J.B. Lonzaga, S.M. Avanesyan, S.C. Langford, J.T. Dickinson, J. Appl. Phys. 94, 4332 (2003)10.1063/1.1603962 ↗
30. S. Besner, J.-Y. Degorce, A.V. Kabashin, M. Meunier, SPIE 5578, 554 (2004)10.1117/12.567746 ↗
31. E.G. Gamaly, A.V. Rode, B. Luther-Davies, Phys. Plasmas 9, 949 (2002)10.1063/1.1447555 ↗
32. J. Jasapara, A.V.V. Nampoothiri, W. Rudolph, Phys. Rev. B 63, 045117 (2001)10.1103/PhysRevB.63.045117 ↗
33. M. Couillard, A. Borowiec, H.K. Haugen, J.S. Preston, E.M. Griswold, G.A. Botton, J. Appl. Phys. 101, 033519 (2007)10.1063/1.2423136 ↗
34. H.A. Jones-Bey, Laser Focus World 43, 52 (2007)10.1080/03050060701556273 ↗
35. A.Y. Vorobyev, C. Guo, Appl. Phys. Lett. 86, 011916 (2005)10.1063/1.1844598 ↗
36. T. Valente, C. Bartuli, S. Picchiotti, F. Marra, Microstructural properties and high temperature performance of plasma sprayed YSZ thermal barrier coatings from nanostructured powders, in Proceedings of the 8th AIMAT Congress, Palermo, 27 June–1 July 2006, publication on CD Rom (Ediset S.r.L., Palermo, 2006)
37. T. Nishi, H. Shibata, H. Ohta, Y. Waseda, Metall. Mater. Trans. A 34, 2801 (2003)10.1007/s11661-003-0181-2 ↗