journal article·2003-05-01

Three-dimensional structuring of sapphire by sequential He + ion-beam implantation and wet chemical etching

A. Crunteanu, G. Jänchen, P. Hoffmann, M. Pollnau, C. Buchal, A. Petraru, R.W. Eason, D.P. Shepherd

Publisher page

Abstract

We present a method for the selective two- and three-dimensional patterning of sapphire using light ion-beam implantation to generate severe lattice damage to depths exceeding 1 μm and subsequent selective wet chemical etching of the damaged regions by hot H3PO4. C-cut sapphire crystals were implanted through contact masks using ion fluences of 1×1016 to 5×1017 He+/cm2 and energies up to 400 keV. The etching process is characterized by a high selectivity and a rate of approximately 19 nm/min. Whereas an implantation that produces a continuously damaged pathway results in complete etching from the surface, sole in-depth implantation using only high-energy ions leads to under-etching of the crystalline surface layer. By a combination of these processes we have fabricated three-dimensional structures such as channels and bridges in sapphire.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ion-surface interactions and analysis · Silicon Nanostructures and Photoluminescence · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.