journal article·2003-05-01

The characteristics of surface acoustic waves on AlN/LiNbO 3 substrates

K.S. Kao, C.C. Cheng, Y.C. Chen, Y.H. Lee

Publisher page

Abstract

The characteristics of surface-acoustic-wave (SAW) devices on various substrates were measured by a network analyzer in the temperature range from 0 to 80 °C. Based on the structure of IDT/AlN/LiNbO3, it was revealed that the magnitude of the temperature coefficient of frequency (TCF) of a SAW on a LiNbO3 substrate was significantly decreased due to the thickness increase of AlN thin film deposited on the LiNbO3 substrate. The TCF of a SAW on an AlN/LiNbO3 device was measured to be about -51 ppm/°C at h/λ=0.1, where h is the thickness of the AlN film and λ is the wavelength of the SAW. This indicates that the deposition of an AlN film on a LiNbO3 substrate could improve the temperature stability, as compared with that of a SAW on a LiNbO3 substrate (-73 ppm/°C). The SAW device on the ST-X quartz is shown to have a positive TCF as the AlN thin film is deposited on the surface of the ST-X quartz. In addition, the phase velocity (Vp) of the SAW on an AlN/LiNbO3 substrate was significantly increased by the increase of AlN thickness (h/λ).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Acoustic Wave Resonator Technologies · GaN-based semiconductor devices and materials · Advanced MEMS and NEMS Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.