A review of the mechanical behavior of CaP and CaP/polymer composites for applications in bone replacement and repair
Source abstract
Abstract
Repair of load-bearing defects resulting from disease or trauma remains a critical barrier for bone tissue engineering. Calcium phosphate (CaP) scaffolds are among the most extensively studied for this application. However, CaPs are reportedly too weak for use in such defects and, therefore, have been limited to non-load-bearing applications. This paper reviews the compression, flexural and tensile properties of CaPs and CaP/polymer composites for applications in bone replacement and repair. This review reveals interesting trends that have not, to our knowledge, previously been reported. Data are classified as bulk, scaffolds, and composites, then organized in order of decreasing strength. This allows for general comparisons of magnitudes of strength both within and across classifications. Bulk and scaffold strength and porosity overlap significantly and scaffold data are comparable to bone both in strength and porosity. Further, for compression, all composite data fall below those of the bulk and most of the scaffold. Another interesting trend revealed is that strength decreases with increasing β-tricalcium phosphate (β-TCP) content for CaP scaffolds and with increasing CaP content for CaP/polymer composites. The real limitation for CaPs appears not to be strength necessarily, but toughness and reliability, which are rarely characterized. We propose that research should focus on novel ways of toughening CaPs and discuss several potential strategies.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · Bone fractures and treatments
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Tissue engineering10.1126/science.8493529 ↗
2. Transplantation of chondrocytes utilizing a polymer–cell construct to produce tissue-engineered cartilage in the shape of a human ear10.1097/00006534-199708000-00001 ↗
3. Medtech@Insight. Tissue engineering and cell transplantation: technologies, opportunities, and evolving markets. Industry Report. Irvine, CA: Medtech@Insight; 2004.
4. US Census Bureau. Health and nutrition. US Census Bureau statistical abstracts of the United States. Washington, DC: US Census Bureau; 2006.
5. Engineering bone: challenges and obstacles10.1111/j.1582-4934.2005.tb00338.x ↗
6. Effect of different sterilization processing methods on the mechanical properties of human cancellous bone allografts10.1016/j.biomaterials.2003.08.067 ↗
7. The pathology of bone allograft10.1302/0301-620X.81B2.0810333 ↗
8. Calcium orthophosphates in medicine: from ceramics to calcium phosphate cements10.1016/S0020-1383(00)80022-4 ↗
9. Bone substitutes: an update10.1016/j.injury.2005.07.029 ↗
10. Properties of osteoconductive biomaterials: calcium phosphates10.1097/00003086-200202000-00009 ↗
11. Nonallograft osteoconductive bone graft substitutes10.1097/00003086-200202000-00006 ↗
12. Role of bone substitutes10.1097/00003086-199603000-00008 ↗
13. Calcium-phosphate ceramics as hard tissue prosthetics10.1097/00003086-198106000-00037 ↗
14. Combined use of designed scaffolds and adenoviral gene therapy for skeletal tissue engineering10.1016/j.biomaterials.2005.07.029 ↗
15. Bioceramic bone graft substitutes: influence of porosity and chemistry10.1111/j.1744-7402.2005.02020.x ↗
16. Bone inductive properties of rhBMP-2 loaded porous calcium phosphate cement implants in cranial defects in rabbits10.1016/j.biomaterials.2003.09.007 ↗
17. Blitterswijk · 2008
18. Skeletal-tissue engineering
19. Calcium sulfate- and calcium phosphate-based bone substitutes. Mimicry of the mineral phase of bone10.1016/S0030-5898(05)70114-0 ↗
20. Macroporous calcium phosphate ceramics for bone substitution: a tracer study on biodegradation with 45Ca tracer10.1016/0142-9612(91)90053-D ↗
21. Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering10.1016/j.biomaterials.2006.01.039 ↗
22. The material science of calcium phosphate ceramics10.1016/0142-9612(80)90009-5 ↗
23. Macroporous biphasic calcium phosphate ceramics versus injectable bone substitute: a comparative study 3 and 8 weeks after implantation in rabbit bone10.1023/A:1011284517429 ↗
24. The use of hydroxyapatite cement in secondary craniofacial reconstruction10.1097/00006534-199910000-00005 ↗
25. Applications of fast-setting hydroxyapatite cement: cranioplasty10.1067/mhn.2000.107679 ↗
26. Clinical case reports of injectable tissue-engineered bone for alveolar augmentation with simultaneous implant placement
27. High survival rate of hydroxyapatite-coated hip prostheses – 100 consecutive hips followed for 10 years10.1080/00016470412331294365 ↗
28. Hydroxyapatite in total hip arthroplasty – clinical results and critical issues10.1097/00003086-199810000-00021 ↗
29. 2008
30. A prospective multicenter randomized clinical trial of autogenous bone versus beta-tricalcium phosphate graft alone for bilateral sinus elevation: histologic and histomorphometric evaluation
31. Synthetic, pure-phase beta-tricalcium phosphate ceramic granules (Cerasorb®) for bone regeneration in the reconstructive surgery of the jaws10.1016/j.ijom.2006.03.017 ↗
32. Comparison of hydroxyapatite and beta tricalcium phosphate as bone substitutes after excision of bone tumors10.1002/jbm.b.30136 ↗
33. Biodegradation and bioresorption of calcium phosphate ceramics10.1016/0267-6605(93)90049-D ↗
34. Clinical applications of calcium phosphate biomaterials: a review10.1016/0272-8842(93)90050-2 ↗
35. Scaffolds in tissue engineering bone and cartilage10.1016/S0142-9612(00)00121-6 ↗
36. Processing and properties of hydroxyapatite-based biomaterials for use as hard tissue replacement implants10.1557/JMR.1998.0015 ↗
37. Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints10.1016/S0142-9612(02)00148-5 ↗
38. A novel method for biomaterial scaffold internal architecture design to match bone elastic properties with desired porosity10.1016/j.jbiomech.2003.09.029 ↗
39. Bone scaffolds: the role of mechanical stability and instrumentation10.1016/j.injury.2005.10.009 ↗
40. Biodegradable polymer scaffolds for cartilage tissue engineering10.1097/00003086-200110001-00024 ↗
41. Porous calcium polyphosphate scaffolds for bone substitute applications in vivo studies10.1016/S0142-9612(01)00336-2 ↗
42. Bioceramics: from concept to clinic10.1111/j.1151-2916.1991.tb07132.x ↗
43. Biomedical applications of polymer–composite materials: a review10.1016/S0266-3538(00)00241-4 ↗
44. In vitro analysis of biodegradable polymer blend/hydroxyapatite composites for bone tissue engineering10.1002/(SICI)1097-4636(19991205)47:3<324::AID-JBM6>3.0.CO;2-Y ↗
45. Carter · 2007
46. Wachtman · 2009
47. Influence of porosity on the mechanical resistance of hydroxyapatite ceramics under compressive stress10.1016/0142-9612(95)98272-G ↗
48. Influence of porosity and pore size on the compressive strength of porous hydroxyapatite ceramic10.1016/S0272-8842(96)00009-0 ↗
49. Control of pore geometry on influencing the mechanical property of porous hydroxyapatite bioceramic10.1007/BF00277185 ↗
50. Pore size and pore volume effects on alumina and TCP ceramic scaffolds10.1016/S0928-4931(02)00129-7 ↗
51. Preparation of macroporous calcium phosphate cement tissue engineering scaffold10.1016/S0142-9612(01)00401-X ↗
52. Effect of micro- and macroporosity of bone substitutes on their mechanical properties and cellular response10.1023/B:JMSM.0000004006.90399.b4 ↗
53. Herschler B. MS thesis. University of Illinois at Urbana-Champaign; 2011.
54. Biphasic calcium phosphate bioceramics: preparation, properties and applications10.1023/A:1022872421333 ↗
55. Calcium phosphate apatites with variable Ca/P atomic ratio III. Mechanical properties and degradation in solution of hot pressed ceramics10.1016/S0142-9612(01)00220-4 ↗
56. Citation classic – a statistical distribution function of wide applicability
57. Chiang · 1997
58. The influence of micropore size on the mechanical properties of bulk hydroxyapatite and hydroxyapatite scaffolds10.1016/j.jmbbm.2009.01.009 ↗
59. Resorbable synthetic polymers as replacements for bone graft10.1016/0267-6605(94)90046-9 ↗
60. Dependence of the mechanical properties of sintered hydroxyapatite on the sintering temperature10.1016/j.msea.2006.05.158 ↗
61. Mechanical-properties of sintered hydroxyapatite for prosthetic applications10.1007/BF02402799 ↗
62. Mechanical characterization of brushite and hydroxyapatite cements10.1016/S0142-9612(01)00041-2 ↗
63. Influence of beta-tricalcium phosphate dispersion on mechanical properties of hydroxyapatite ceramics10.2109/jcersj2.116.1002 ↗
64. Development of high strength hydroxyapatite by solid-state-sintering process10.1016/j.ceramint.2005.10.025 ↗
65. Improving mechanical and biological properties of macroporous HA scaffolds through composite coatings10.1016/j.colsurfb.2009.07.012 ↗
66. Effects of degradation and porosity on the load bearing properties of model hydroxyapatite bone scaffolds10.1002/jbm.a.30658 ↗
67. The mechanical properties and osteoconductivity of hydroxyapatite bone scaffolds with multi-scale porosity10.1016/j.biomaterials.2006.08.021 ↗
68. Colloidal inks for directed assembly of 3-D periodic structures10.1021/la0257135 ↗
69. Chaotic mixing in three-dimensional microvascular networks fabricated by direct-write assembly10.1038/nmat863 ↗
70. Mechanical properties of calcium phosphate scaffolds fabricated by robocasting10.1002/jbm.a.31587 ↗
71. The in situ synthesis of biphasic calcium phosphate scaffolds with controllable compositions, structures, and adjustable properties10.1002/jbm.a.31844 ↗
72. Comparative in vivo study of six hydroxyapatite-based bone graft substitutes10.1002/jor.20648 ↗
73. Sintering effects on the strength of hydroxyapatite10.1016/0142-9612(95)98859-C ↗
74. Mechanical properties of sintered hydroxyapatite and tricalcium phosphate ceramic10.1023/A:1008883809160 ↗
75. An improvement in sintering property of [beta]-tricalcium phosphate by addition of calcium pyrophosphate10.1016/S0142-9612(01)00201-0 ↗
76. Nano-hydroxyapatite/polyamide66 composite tissue-engineering scaffolds with anisotropy in morphology and mechanical behaviors10.1002/pola.23171 ↗
77. Bioresorbable devices made of forged composites of hydroxyapatite (HA) particles and poly-l-lactide (PLLA): Part I. Basic characteristics10.1016/S0142-9612(98)00241-5 ↗
78. Preparation and characterization of homogeneous chitosan–polylactic acid/hydroxyapatite nanocomposite for bone tissue engineering and evaluation of its mechanical properties10.1016/j.actbio.2009.03.005 ↗
79. Mechanical properties of hydroxyapatite whisker reinforced polyetherketoneketone composite scaffolds10.1016/j.jmbbm.2009.07.002 ↗
80. The nanocomposite scaffold of poly(lactide–co-glycolide) and hydroxyapatite surface-grafted with l-lactic acid oligomer for bone repair10.1016/j.actbio.2009.03.024 ↗
81. Poly(lactide–co-glycolide)/hydroxyapatite composite scaffolds for bone tissue engineering10.1016/j.biomaterials.2005.08.016 ↗
82. Fabrication, characterization, and in vitro evaluation of poly(lactic acid glycolic acid)/nano-hydroxyapatite composite microsphere-based scaffolds for bone tissue engineering in rotating bioreactors10.1002/jbm.a.32302 ↗
83. Mechanical behaviour of porous hydroxyapatite10.1016/j.actbio.2007.11.002 ↗
84. Reinforcement by crack-tip blunting in porous ceramics10.1016/S0955-2219(03)00365-0 ↗
85. Improving the properties of porous hydroxyapatite ceramics by fabricating methods10.1007/s10853-005-3875-6 ↗
86. Improvement of mechanical properties of hydroxyapatite particle-filled poly(l-lactide) biocomposites using lysine tri-isocyanate10.1007/s10853-009-3782-3 ↗
87. Effect of porogen on the physico-chemical properties and degradation performance of PLGA scaffolds10.1016/j.polymdegradstab.2009.11.039 ↗
88. Effect of temperature and pressure of hot pressing on the mechanical properties of PP–HA bio-composites10.1016/j.matdes.2009.03.011 ↗
89. In situ preparation and characterization of a novel gelatin/poly(d,l-lactide)/hydroxyapatite nanocomposite10.1002/jbm.b.31388 ↗
90. Investigation into the formation and mechanical properties of a bioactive material based on collagen and calcium phosphate10.1007/BF00120378 ↗
91. Electrospun nanostructured scaffolds for bone tissue engineering10.1016/j.actbio.2009.05.007 ↗
92. Structure and performance of nano-hydroxyapatite filled biodegradable poly((1,2-propanediol-sebacate)-citrate) elastomers10.1016/j.polymdegradstab.2009.04.034 ↗
93. Nanohydroxyapatite/poly(ester urethane) scaffold for bone tissue engineering10.1016/j.actbio.2009.05.001 ↗
94. Controlling the processing of collagen–hydroxyapatite scaffolds for bone tissue engineering10.1007/s10856-006-0682-9 ↗
95. Bayesian computer-aided experimental design of heterogeneous scaffolds for tissue engineering10.1016/j.cad.2005.02.004 ↗
96. Fracture toughness testing of brittle materials10.1179/imr.1993.38.2.53 ↗
97. Salem · 2002
98. Nanostructured biomaterials for tissue engineering bone10.1007/10_021 ↗
99. Bone response to free form-fabricated hydroxyapatite and zirconia scaffolds: a histological study in the human maxilla10.1111/j.1600-0501.2008.01595.x ↗
100. The structure of the bond between bone and porous silicon-substituted hydroxyapatite bioceramic implants10.1002/jbm.a.30690 ↗