journal article·2011-06

Compact cavity resonators using high impedance surfaces

D. Dancila, X. Rottenberg, N. Focant, H. A. C. Tilmans, W. Raedt, I. Huynen

Applied Physics A· Volume 103· Issue 3
Publisher page

Abstract

This paper presents a miniaturization concept for cavity resonators. The idea is to create a λ/4 long cavity resonator by using a combination of Perfect Electric Conductor (PEC) and Perfect Magnetic Conductor (PMC) boundary conditions. Reducing by half the length and width of a metallic cavity resonator and placing PMC boundary conditions on two adjacent side walls allows the resonance of a λ/4 mode inside the hybrid cavity resonator, at the same frequency as the λ/2 long metallic one. The practical implementation of the PMC boundary condition is realized by using High Impedance Surfaces (HIS). The design of the surfaces is realized at the element level and is implemented on standard microwave substrate. Measurements demonstrate a cavity resonator operating at 4 GHz with half the length and width of a metallic cavity resonator, meanwhile its volume is divided by four.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Antenna and Metasurface Technologies · Microwave Engineering and Waveguides · Antenna Design and Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Futron Corporation, Space transportation costs: trends in price per pound to orbit 1990–2000, White Paper, 2002
2. V.E. Boria, B. Gimeno, Waveguide filters for satellites. IEEE Microw. Mag. October (2007)10.1109/MMM.2007.903649 ↗
3. G. Maral, M. Bousquet, Satellite Communication Systems, 3rd edn. (Wiley, Chichester, 1998)
4. R. Coirault, S.J. Feltham, G. Gatti, G. Guglielmi, D. Perring, Overview of microwave components activity at the European Space Agency. IEEE Trans. Microw. Theory Tech. 40(6), 1150–1158 (1992)10.1109/22.141346 ↗
5. N. Engheta, An idea for thin subwavelength cavity resonators using metamaterials with negative permittivity and permeability. IEEE Antennas Wirel. Propag. Lett. 1, 10–13 (2002)10.1109/LAWP.2002.802576 ↗
6. S. Hrabar, J. Bartolic, Z. Sipius, Waveguide miniaturization using uniaxial negative permeability metamaterial. IEEE Antennas Wirel. Propag. Lett. 53(1), 110–119 (2005)10.1109/TAP.2004.840503 ↗
7. F.R. Yang, K.P. Ma, Y. Qian, T. Itoh, A novel TEM waveguide using uniplanar compact photonic-bandgap (UC-PBG) structure. IEEE Trans. Microw. Theory Tech. 47(11), 2092–2098 (1999)10.1109/22.798004 ↗
8. D.F. Sievenpiper, High-impedance electromagnetic surfaces, Ph.D. dissertation, Dept. Elect. Eng., Univ. of California, Los Angeles, UCLA, 1999
9. R.M. Mateos, Low-profile antennas based on aperiodic and compact meta-surfaces, Ph.D. dissertation, Ecole Polytechnique, Univ. Catholique de Louvain, Louvain-la-Neuve, UCL, 2009
10. D. Chicherina, S. Dudorova, M. Sternerb, J. Oberhammerb, A.V. Räisänena, Micro-fabricated High-Impedance Surface for millimeter wave beam steering applications, in Proc. of 33rd International Conference on Infrared, Millimeter, and Terahertz Waves, Pasadena USA ( 2008)
11. D.M. Pozar, Microwave Engineering (Addison-Wesley, Reading, 1990)