journal article·2014-06

Structure and properties of (TiVCrZrY)N coatings prepared by energetic bombardment sputtering with different nitrogen flow ratios

Du-Cheng Tsai, Zue-Chin Chang, Bing-Hau Kuo, Ming-Hua Shiao, Shou-Yi Chang, Fuh-Sheng Shieu

Applied Physics A· Volume 115· Issue 4
Publisher page

Abstract

(TiVCrZrY)N coatings were deposited onto Si substrate by the radio-frequency (RF) magnetron sputtering of a TiVCrZrY alloy target in an N2/Ar atmosphere. The crystal, microstructural, mechanical, and electrical properties at different N2-to-total (N2+Ar) flow-rate ratio (R N) values were investigated. The coating produced in pure Ar had an equiaxed structure with a hexagonal-close-packed phase. With increased R N, the crystallinity and grain size markedly decreased. The microstructure of (TiVCrZrY)N coatings transformed from V-shaped columnar with a rough-domed surface into fine fibrous with a smooth surface. The amorphous transition layer above the substrate was also significantly thickened. The hardness of (TiVCrZrY)N decreased from 20.9 GPa to 18.9 GPa, and the electrical resistivity increased from 398.2 μΩ⋅cm to 21870 μΩ⋅cm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Ion-surface interactions and analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. H.O. Pierson, Handbook of Refractory Carbides and Nitrides, (Noyes, New Jersey, 1996)
2. V. Chawla, R. Jayaganthan, R. Chandra, Mater. Charact. 59, 1015–1020 (2008)10.1016/j.matchar.2007.08.017 ↗
3. M. Popović, M. Novaković, N. Bibić, Mater. Charact. 60, 1463–1470 (2009)10.1016/j.matchar.2009.07.002 ↗
4. Y. Wang, X. Yan, B. Li, G. Tu, Int. J. Refract. Met. Hard Mater. 30, 200–207 (2012)10.1016/j.ijrmhm.2011.08.010 ↗
5. L. Zhu, M. Hu, W. Ni, Y. Liu, Vacuum 86, 1795–1799 (2012)10.1016/j.vacuum.2012.04.013 ↗
6. D.M. Devia, E.R. Parra, P.J. Arango, A.P. Tschiptschin, J.M. Velez, Appl. Surf. Sci. 257, 6181–6185 (2011)10.1016/j.apsusc.2011.02.027 ↗
7. C.H. Hsu, C.K. Lin, K.H. Huang, K.L. Ou, Surf. Coat. Technol. (2012). doi: 10.1016/j.surfcoat.2012.05.095
8. Z.Z. Tang, Ceram. Int. 38, 2997–3000 (2012)10.1016/j.ceramint.2011.11.079 ↗
9. H. Hasegawa, A. Kimura, T. Suzuki, J. Vac. Sci. Technol. A 18, 1038–1040 (2000)10.1116/1.582296 ↗
10. B. Ren, Z. Shen, Z. Liu, J. Alloys Compd. 560, 171–176 (2013)10.1016/j.jallcom.2013.01.148 ↗
11. P.K. Huang, J.W. Yeh, Surf. Coat. Technol. 203, 1891–1896 (2009)10.1016/j.surfcoat.2009.01.016 ↗
12. K.H. Cheng, C.H. Lai, S.J. Lin, J.W. Yeh, Thin Solid Films 519, 3185–3190 (2011)10.1016/j.tsf.2010.11.034 ↗
13. M.H. Tsai, C.H. Lai, J.W. Yeh, J.Y. Gan, J. Phys. D 41, 235402 (2008)
14. S.C. Liang, D.C. Tsai, Z.C. Chang, H.S. Sung, Y.C. Lin, Y.J. Yeh, M.J. Deng, F.S. Shieu, Appl. Surf. Sci. 258, 399–403 (2011)10.1016/j.apsusc.2011.09.006 ↗
15. M. Uchida, N. Nihira, A. Mitsuo, K. Toyoda, K. Kubota, T. Aizawa, Surf. Coat. Technol., 177–178, 627–630 (2004)10.1016/S0257-8972(03)00937-X ↗
16. D.C. Tsai, Y.L. Huang, S.R. Lin, S.C. Liang, F.S. Shieu, Appl. Surf. Sci. 257, 1361–1367 (2010)10.1016/j.apsusc.2010.08.078 ↗
17. H.P. Klug, L.E. Alexander, X-Ray Diffraction Procedures for Polycrystalline and Amorphous Materials (Wiley, New York, 1974)
18. R.M. Mason, M. Pichiling, J. Appl. Phys. 32, 365–369 (1961)10.1063/1.1736027 ↗
19. D.C. Tsai, F.S. Shieu, S.Y. Chang, H.C. Yao, M.J. Deng, J. Electrochem. Soc. 157, K52–K58 (2010)10.1149/1.3285047 ↗
20. D.C. Tsai, Y.L. Huang, S.R. Lin, D.R. Jung, S.Y. Chang, F.S. Shieu, J. Alloys Compd. 509, 3141–3147 (2011)10.1016/j.jallcom.2010.12.026 ↗
21. J. Musil, H. Poláková, Surf. Coat. Technol. 127, 99–106 (2000)10.1016/S0257-8972(00)00560-0 ↗
22. J. Pelleg, L.Z. Zevin, S. Lungo, N. Croitoru, Thin Solid Films 197, 117–128 (1991)10.1016/0040-6090(91)90225-M ↗
23. F. Shinoki, A. Itoh, J. Appl. Phys. 46, 3381–3384 (1975)10.1063/1.322242 ↗
24. D.C. Tsai, S.C. Liang, Z.C. Chang, T.N. Lin, M.H. Shiao, F.S. Shieu, Surf. Coat. Technol. 207, 293–299 (2012)10.1016/j.surfcoat.2012.07.004 ↗
25. Y. Zhang, Y.J. Zhou, J.P. Lin, G.L. Chen, P.K. Liaw, Adv. Eng. Mater. 10, 534–538 (2008)10.1002/adem.200700240 ↗
26. V. Braic, A. Vladescu, M. Balaceanu, C.R. Luculescu, M. Braic, Surf. Coat. Technol. 211, 117–121 (2012)10.1016/j.surfcoat.2011.09.033 ↗
27. A. van der Drift, Philips Res. Rep. 22, 267–288 (1967)
28. S. Veprek, J. Vac. Sci. A 17, 2401–2420 (1999)10.1116/1.581977 ↗
29. R.W. Siegel, G.E. Fougere, Nanostruct. Mater. 6, 205–216 (1995)10.1016/0965-9773(95)00044-5 ↗
30. J.D. Plummer, M.D. Deal, P.B. Griffin, Silicon VLSI Technology: Fundamentals Practice and Modeling (Prentice-Hall, Englewood Cliffs, 2000)
31. W.D. Sproul, J.E. Greene, J.A. Thornton, Physics and Chemistry of Protective Coatings (American Institute of Physics, New York, 1986)