In vivo assessment of dual-function submicron textured nitric oxide releasing catheters in a 7-day rabbit model
Source abstract
Abstract
Catheter-induced thrombosis is a major contributor to infectious and mechanical complications of biomaterials that lead to device failure. Herein, a dualfunction submicron textured nitric oxide (NO)-releasing catheter was developed. The hemocompatibility and antithrombotic activity of vascular catheters were evaluated in both 20 h in vitro blood loop and 7 d in vivo rabbit model. Surface characterization assessments via atomic force microscopy show the durability of the submicron pattern after incorporation of NO donor S-nitroso-N-acetylpenicillamine (SNAP). The SNAP-doped catheters exhibited prolonged and controlled NO release mimicking the levels released by endothelium. Fabricated catheters showed cytocompatibility when evaluated against BJ human fibroblast cell lines. After 20h in vitro evaluation of catheters in a blood loop, textured-NO catheters exhibited a 13-times reduction in surface thrombus formation compared to the control catheters, which had 83% of the total area covered by clots. After the 7 d in vivo rabbit model, analysis on the catheter surface was examined via scanning electron microscopy, where significant reduction of platelet adhesion, fibrin mesh, and thrombi can be observed on the NO-releasing textured surfaces. Moreover, compared to relative controls, a 63% reduction in the degree of thrombus formation within the jugular vein was observed. Decreased levels of fibrotic tissue decomposition on the jugular vein and reduced platelet adhesion and thrombus formation on the texture of the NO-releasing catheter surface are indications of mitigated foreign body response. This study demonstrated a biocompatible and robust dual-functioning textured NO PU catheter in limiting fouling-induced complications for longer-term blood-contacting device applications. STATEMENT OF SIGNIFICANCE: Catheter-induced thrombosis is a major contributor to infectious and mechanical complications of biomaterials that lead to device failure. This study demonstrated a robust, biocompatible, dual-functioning textured nitric oxide (NO) polyurethane catheter in limiting fouling-induced complications for longer-term blood-contacting device applications. The fabricated catheters exhibited prolonged and controlled NO release that mimics endothelium levels. After the 7 d in vivo model, a significant reduction in platelet adhesion, fibrin mesh, and thrombi was observed on the NO-releasing textured catheters, along with decreased levels of fibrotic tissue decomposition on the jugular vein. Results illustrate that NO-textured catheter surface mitigates foreign body response.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Central Venous Catheters and Hemodialysis · Mechanical Circulatory Support Devices · Vascular Procedures and Complications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Catheter-related thrombosis: a practical approach10.1177/1751143715618683 ↗
2. Catheter-related venous thrombosis10.1177/1358863X18779695 ↗
3. Complications of anticoagulation with heparin
4. Unravelling surface modification strategies for preventing medical device-induced thrombosis10.1002/adhm.202301039 ↗
5. A versatile passivated protein-adsorption platform for rapid healing of vascular stents by modulating the microenvironment
6. Guidelines for the prevention of intravascular catheter-related infections10.1093/cid/cir257 ↗
7. Bio-inspired hemocompatible surface modifications for biomedical applications10.1016/j.pmatsci.2022.100997 ↗
8. Mussel-inspired and bioclickable peptide engineered surface to combat thrombosis and infection
9. An engineered micropattern to reduce bacterial colonization, platelet adhesion and fibrin sheath formation for improved biocompatibility of central venous catheters10.1186/s40169-015-0050-9 ↗
10. Mini review: biomimetic models and bioinspired surfaces for fouling control10.1080/08927014.2010.536837 ↗
11. Staphylococcus epidermidis adhesion on hydrophobic and hydrophilic textured biomaterial surfaces10.1088/1748-6041/9/3/035003 ↗
12. Submicron-textured biomaterial surface reduces staphylococcal bacterial adhesion and biofilm formation10.1016/j.actbio.2011.08.009 ↗
13. Sub-micron texturing for reducing platelet adhesion to polyurethane biomaterials10.1002/jbm.a.30554 ↗
14. Achieving long-term biocompatible silicone via covalently immobilized S-nitroso- N-acetylpenicillamine (SNAP) that exhibits 4 months of sustained nitric oxide release10.1021/acsami.8b08647 ↗
15. Multipronged approach to combat catheter-associated infections and thrombosis by combining nitric oxide and a polyzwitterion: a 7 day in vivo study in a rabbit model10.1021/acsami.9b22442 ↗
16. Improved hemocompatibility of silicone rubber extracorporeal tubing via solvent swelling-impregnation of S-nitroso-N-acetylpenicillamine (SNAP) and evaluation in rabbit thrombogenicity model10.1016/j.actbio.2016.04.025 ↗
17. A kinetic study of S-nitrosothiol decomposition10.1002/1521-3765(20020118)8:2<380::AID-CHEM380>3.0.CO;2-P ↗
18. Long-term nitric oxide release and elevated temperature stability with S-nitroso-N-acetylpenicillamine (SNAP)-doped Elast-eon E2As polymer10.1016/j.biomaterials.2013.05.063 ↗
19. Inhibition of bacterial adhesion and biofilm formation by dual functional textured and nitric oxide releasing surfaces10.1016/j.actbio.2017.01.030 ↗
20. Antimicrobial nitric oxide releasing surfaces based on S-nitroso-N-acetylpenicillamine impregnated polymers combined with submicron-textured surface topography10.1039/C7BM00108H ↗
21. Blood coagulation response and bacterial adhesion to biomimetic polyurethane biomaterials prepared with surface texturing and nitric oxide release10.1016/j.actbio.2018.11.035 ↗
22. In vivo and in vitro fibroblasts' behavior and capsular formation in correlation with smooth and textured silicone surfaces10.1007/s00266-022-02769-y ↗
23. Effects of titanium nanotubes on the osseointegration, cell differentiation, mineralisation and antibacterial properties of orthopaedic implant surfaces10.1302/0301-620X.100B1.BJJ-2017-0551.R1 ↗
24. In vivo blood-repellent performance of a controllable facile-generated superhydrophobic surface10.1021/acsami.0c21058 ↗
25. Submicron topography design for controlling staphylococcal bacterial adhesion and biofilm formation10.1002/jbm.a.37369 ↗
26. Study of the in vitro cytotoxicity testing of medical devices10.3892/br.2015.481 ↗
27. Locating the optimal internal jugular target site for central venous line placement10.1016/j.jclinane.2016.03.070 ↗
28. Collapsibility of the internal jugular veins in the lateral decubitus body position: a potential protective role of the cerebral venous outflow against neurodegeneration10.1016/j.mehy.2019.109397 ↗
29. In vitro evaluation of blood plasma coagulation responses to four medical-grade polyurethane polymers10.1177/08853282231191410 ↗
30. Micro-/nano-structured superhydrophobic surfaces in the biomedical field: part I: basic concepts and biomimetic approaches10.2217/nnm.14.174 ↗
31. Variability of water uptake studies of biomedical polymers10.1002/app.33485 ↗
32. Origin of long-term storage stability and nitric oxide release behavior of CarboSil polymer doped with S-nitroso-N-acetyl-D-penicillamine10.1021/acsami.5b07501 ↗
33. Nitric oxide-flux dependent bacterial adhesion and viability at fibrinogen-coated surfaces10.1039/c3bm60130g ↗
34. Estimation of nitric oxide production and reactionrates in tissue by use of a mathematical model10.1152/ajpheart.1998.274.6.H2163 ↗
35. Study of crystal formation and nitric oxide (NO) release mechanism from S-nitroso-N-acetylpenicillamine (SNAP)-doped CarboSil polymer composites for potential antimicrobial applications10.1016/j.compositesb.2017.03.027 ↗
36. Enhancement of fibroblast collagen synthesis by nitric oxide10.1006/niox.2000.0307 ↗
37. Blood flow in the rabbit aortic arch and descending thoracic aorta10.1098/rsif.2011.0116 ↗
38. Nitric oxide-releasing lock solution for the prevention of catheter-related infection and thrombosis10.1021/acsabm.1c01272 ↗
39. MSc*,1, Catheter-related urinary nosocomial infections in intensive care units: an epidemiologic study in North of Iran
40. Size- and shape-dependent foreign body immune response to materials implanted in rodents and non-human primates10.1038/nmat4290 ↗
41. Achieving long-term biocompatible silicone via covalently immobilized S-nitroso-N-acetylpenicillamine (SNAP) that exhibits 4 months of sustained nitric oxide release10.1021/acsami.8b08647 ↗
42. Antimicrobial and physicochemical characterization of biodegradable, nitric oxide-releasing nanocellulose–chitosan packaging membranes10.1021/acs.jafc.6b01936 ↗
43. Effect of microtextured surfaces on the performance of percutaneous devices10.1002/jbm.a.30337 ↗