journal article·2024-02

Influence of copper (Cu2+) on the structural, micro-structural, dielectric and non-ohmic properties of Pb1 − xCuxTiO3 materials synthesized using sol–gel method

E. H. Lahrar, H. Essaoudi

Applied Physics A· Volume 130· Issue 2
Publisher page

Abstract

Ceramic materials of the composition Pb1 − xCuxTiO3 with x = 0.00, 0.04, 0.06 and 0.08 were synthesized using the sol–gel process. An analysis of their structural, dielectric, and non-ohmic characteristics was investigated. X-ray diffraction data and Rietveld refinement indicate the crystallization of the PbTiO3 ceramic in a pure perovskite structure of tetragonal symmetry, with a phase transition to the pseudo-cubic structure following the incorporation of copper into the PT matrix. The texture, morphology, and microstructure of Pb1 − xCuxTiO3 ceramics were observed using a scanning electron microscope. An impedance spectroscopy study of the dielectric measurements was carried out and revealed that the phase transition temperature decreases proportionally with increasing copper concentration, confirming the incorporation of copper and highlighting its influence on the Curie temperature (Tc), the value of the permittivity (εr), and the dielectric losses (tg δ). The electrical characteristics of PCuxT ceramics reveal that variations in grain size clearly influence the non-ohmic properties. This observation can be attributed to the barrier behavior inherent in the Schottky-type model, as well as to the grain size limitation characteristics of the Internal Barrier Layer Capacitor model.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Multiferroics and related materials · Dielectric properties of ceramics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. C. Moure, O. Peña, Recent advances in perovskites: processing and properties. Prog. Solid State Chem. 43(4), 123–148 (2015). https://doi.org/10.1016/J.PROGSOLIDSTCHEM.2015.09.00110.1016/J.PROGSOLIDSTCHEM.2015.09.001 ↗
2. M.H. Zhang et al., High energy storage capability of perovskite relaxor ferroelectrics via hierarchical optimization. Rare Met. 41(3), 730–744 (2022). https://doi.org/10.1007/S12598-021-01869-Z/METRICS10.1007/S12598-021-01869-Z/METRICS ↗
3. L. Yang et al., Perovskite lead-free dielectrics for energy storage applications. Prog. Mater. Sci. 102, 72–108 (2019). https://doi.org/10.1016/J.PMATSCI.2018.12.00510.1016/J.PMATSCI.2018.12.005 ↗
4. B. Mohanty, S. Bhattacharjee, N.C. Nayak, R.K. Parida, B.N. Parida, Dielectric, magnetic and optical study of La-doped BFO-BST ceramic for multifunctional applications. Mater. Sci. Semicond. Process. 128, 105720 (2021). https://doi.org/10.1016/J.MSSP.2021.10572010.1016/J.MSSP.2021.105720 ↗
5. S. Behara, T. Poonawala, T. Thomas, Crystal structure classification in ABO3 perovskites via machine learning. Comput. Mater. Sci. 188, 110191 (2021). https://doi.org/10.1016/J.COMMATSCI.2020.11019110.1016/J.COMMATSCI.2020.110191 ↗
6. B. Sun et al., ABO3 multiferroic perovskite materials for memristive memory and neuromorphic computing. Nanoscale Horizons 6(12), 939–970 (2021). https://doi.org/10.1039/D1NH00292A10.1039/D1NH00292A ↗
7. Y. Sakout et al., Structural, optical, and dielectric study of hydrothermally synthesized barium-doped PbTiO3 (0 ≤ x ≤ 0.9) perovskite materials. Appl. Phys. A Mater. Sci. Process. 129(12), 1–18 (2023). https://doi.org/10.1007/S00339-023-07130-X/METRICS10.1007/S00339-023-07130-X/METRICS ↗
8. M.H. Khedhri, N. Abdelmoula, H. Khemakhem, R. Douali, F. Dubois, Structural, spectroscopic and dielectric properties of Ca-doped BaTiO3. Appl. Phys. A Mater. Sci. Process. 125(3), 1–13 (2019). https://doi.org/10.1007/S00339-019-2487-Y/METRICS10.1007/S00339-019-2487-Y/METRICS ↗
9. N.H. Thoan et al., Magnetic and electrical properties of Ni-doped Ba(Ti0.8Zr0.2)O3 materials. Appl. Phys. A Mater. Sci. Process. 127(7), 1–13 (2021). https://doi.org/10.1007/S00339-021-04715-2/METRICS10.1007/S00339-021-04715-2/METRICS ↗
10. E. Hannachi et al., Impact of tin oxide on the structural features and radiation shielding response of some ABO3 perovskites ceramics (A = Ca, Sr, Ba; B = Ti). Appl. Phys. A Mater. Sci. Process. 127(12), 1–12 (2021). https://doi.org/10.1007/S00339-021-05092-6/METRICS10.1007/S00339-021-05092-6/METRICS ↗
11. Z. Ullah, J. Rehman, F.U. Rehman, S. Gulbadan, M.A. Mahmood, M.A. Khan, Structural and dielectric properties of Sr substituted BaTi0.8Zr0.2O3 perovskite synthesized via solid state reaction route. Appl. Phys. A Mater. Sci. Process. 128(6), 1–13 (2022). https://doi.org/10.1007/S00339-022-05619-5/METRICS10.1007/S00339-022-05619-5/METRICS ↗
12. L.T.M. Oanh, D.B. Do, N. Van Minh, A study of structural phase transition, vibration, optical, and magnetic properties of Fe-doped PbTiO3 nanostructured powders. Appl. Phys. A Mater. Sci. Process. 122(7), 1–6 (2016). https://doi.org/10.1007/S00339-016-0207-4/METRICS10.1007/S00339-016-0207-4/METRICS ↗
13. J. Gao et al., Enhancing dielectric permittivity for energy-storage devices through tricritical phenomenon. Sci. Rep. 7(1), 1–10 (2017). https://doi.org/10.1038/srep4091610.1038/srep40916 ↗
14. T. Abe et al., Visualization of spontaneous electronic polarization in Pb ion of ferroelectric PbTiO3 by synchrotron-radiation x-ray diffraction. Appl. Phys. Lett. (2020). https://doi.org/10.1063/5.0037396/3928910.1063/5.0037396/39289 ↗
15. R. Bel-Hadj-Tahar, M. Abboud, Structural development and kinetic analysis of PbTiO3 powders processed at low-temperature via new sol-gel approach. Solid State Sci. 78, 74–85 (2018). https://doi.org/10.1016/J.SOLIDSTATESCIENCES.2018.02.00210.1016/J.SOLIDSTATESCIENCES.2018.02.002 ↗
16. D. K. Pattanayak, A. K. Padhy, R. Parida, B. N. Parida, and T. Yadav, Electronic applications of perovskite. In: Perovskite Metal Oxides: Synthesis, Properties, and Applications, pp. 315–339 (2023). https://doi.org/10.1016/B978-0-323-99529-0.00016-3.10.1016/B978-0-323-99529-0.00016-3 ↗
17. S.K. Samal, B. Biswal, M.K. Mallick, R.N.P. Choudhary, S. Bhuyan, Structural, capacitive and resistive characteristics of (Pb0.6Bi0.2Sm0.2)(Fe0.4Ti0.6)O3. Ceram. Int. 48(10), 13970–13976 (2022). https://doi.org/10.1016/J.CERAMINT.2022.01.28110.1016/J.CERAMINT.2022.01.281 ↗
18. E.H. Lahrar, O. El Ghadraoui, M. Zouhairi, A. Harrach, T. Lamcharfi, E.H. El Ghadraoui, Synthesis and structural and dielectric properties of Ca-doped PbTiO3 ceramics prepared by a hydrothermal method. New J. Chem. 45(30), 13293–13301 (2021). https://doi.org/10.1039/D1NJ02693C10.1039/D1NJ02693C ↗
19. R. Salomão, L.M. Milena, M.H. Wakamatsu, V.C. Pandolfelli, Hydrotalcite synthesis via co-precipitation reactions using MgO and Al(OH)3 precursors. Ceram. Int. 37(8), 3063–3070 (2011). https://doi.org/10.1016/J.CERAMINT.2011.05.03410.1016/J.CERAMINT.2011.05.034 ↗
20. R. Abirami, T.S. Senthil, S. Kalpana, L. Kungumadevi, M. Kang, Hydrothermal synthesis of pure PbTiO3 and silver doped PbTiO3 perovskite nanoparticles for enhanced photocatalytic activity. Mater. Lett. 279, 128507 (2020). https://doi.org/10.1016/J.MATLET.2020.12850710.1016/J.MATLET.2020.128507 ↗
21. J. Li, M. Wei, L. Li, S. Tang, Citrate precursor synthesis of perovskite-type NdAlO3 as a microwave dielectric material. J. Mater. Sci. Mater. Electron. 31(18), 15352–15360 (2020). https://doi.org/10.1007/S10854-020-04099-8/METRICS10.1007/S10854-020-04099-8/METRICS ↗
22. M. Siddiqui, J.J. Mohamed, Z.A. Ahmad, Structural, piezoelectric, and dielectric properties of PZT-based ceramics without excess lead oxide. J. Aust. Ceram. Soc. 56(2), 371–377 (2020). https://doi.org/10.1007/S41779-019-00337-3/METRICS10.1007/S41779-019-00337-3/METRICS ↗
23. M. Kosec et al., Low-temperature processing of (Pb, La)(Zr, Ti) O3 thick films on alumina substrates. Int. J. Mater. Res. 92(2), 97–104 (2001). https://doi.org/10.3139/IJMR-2001-002210.3139/IJMR-2001-0022 ↗
24. I. Bretos, R. Jiménez, J. Garcïa-López, L. Pardos, M.L. Calzada, Photochemical solution deposition of lead-based ferroelectric films: avoiding the PbO-excess addition at last. Chem. Mater. 20(18), 5731–5733 (2008). https://doi.org/10.1021/CM801269G/SUPPL_FILE/CM801269G_SI_001.PDF10.1021/CM801269G/SUPPL_FILE/CM801269G_SI_001.PDF ↗
25. L. Hai, Z. Bo-Ping, P. Yu, Z. Lei, W. Kai-Sheng, L. Yan-Tao, Effects of sintering temperature on structure and properties of BY-PT-PMN ternary piezoelectric ceramics. J. Mater. Res. 30(6), 782–790 (2015). https://doi.org/10.1557/JMR.2015.51/METRICS10.1557/JMR.2015.51/METRICS ↗
26. L. Xu, S. Yuan, H. Zeng, J. Song, A comprehensive review of doping in perovskite nanocrystals/quantum dots: evolution of structure, electronics, optics, and light-emitting diodes. Mater. Today Nano 6, 100036 (2019). https://doi.org/10.1016/J.MTNANO.2019.10003610.1016/J.MTNANO.2019.100036 ↗
27. J.Ṕ De La Cruz, E. Joanni, P.M. Vilarinho, A.L. Kholkin, Thickness effect on the dielectric, ferroelectric, and piezoelectric properties of ferroelectric lead zirconate titanate thin films. J. Appl. Phys. (2010). https://doi.org/10.1063/1.3514170/37230010.1063/1.3514170/372300 ↗
28. X. Xing, J. Chen, J. Deng, G. Liu, Solid solution Pb1 − xSrxTiO3 and its thermal expansion. J. Alloy. Compd. 360(1–2), 286–289 (2003). https://doi.org/10.1016/S0925-8388(03)00345-110.1016/S0925-8388(03)00345-1 ↗
29. F.M. Pontes et al., Structural and morphological characterization of Pb1 − xBaxTiO3 thin films prepared by chemical route: an investigation of phase transition. Mater. Chem. Phys. 108(2–3), 312–318 (2008). https://doi.org/10.1016/J.MATCHEMPHYS.2007.10.00410.1016/J.MATCHEMPHYS.2007.10.004 ↗
30. A.K.S. Chauhan, V. Gupta, K. Sreenivas, Dielectric and piezoelectric properties of sol–gel derived Ca doped PbTiO3. Mater. Sci. Eng. B 130(1–3), 81–88 (2006). https://doi.org/10.1016/J.MSEB.2006.02.05510.1016/J.MSEB.2006.02.055 ↗
31. V. Uvarov, The influence of X-ray diffraction pattern angular range on Rietveld refinement results used for quantitative analysis, crystallite size calculation and unit-cell parameter refinement. J. Appl. Crystallogr. 52(2), 252–261 (2019). https://doi.org/10.1107/S1600576719000621/KS5609SUP4.ZIP10.1107/S1600576719000621/KS5609SUP4.ZIP ↗
32. K. Pubby, S.B. Narang, S.K. Chawla, R.K. Mudsainiyan, Effect of temperature on dielectric and electrical properties of Co–Zr doped barium hexaferrites prepared by sol–gel method. J. Mater. Sci. Mater. Electron. 27(11), 11220–11230 (2016). https://doi.org/10.1007/S10854-016-5242-6/METRICS10.1007/S10854-016-5242-6/METRICS ↗
33. E.H. Lahrar, O.E.L. Ghadraoui, A. Harrach, M. Zouhairi, T. Lamcharfi, E.H. El Ghadraoui, Influence of strontium on the structural and dielectric properties of hydrothermally processed PbTiO3 ceramic. Asian J. Chem. 32(3), 597–601 (2020). https://doi.org/10.14233/AJCHEM.2020.2236310.14233/AJCHEM.2020.22363 ↗
34. C. Fu, N. Chen, G. Du, Comparative studies of nickel doping effects at A and B sites of BaTiO3 ceramics on their crystal structures and dielectric and ferroelectric properties. Ceram. Int. 43(17), 15927–15931 (2017). https://doi.org/10.1016/J.CERAMINT.2017.08.16910.1016/J.CERAMINT.2017.08.169 ↗
35. H.E. Dnoub et al., Study of structural and dielectric properties of Nickel-doped BaTiO3 material. Mediterr. J. Chem. 8(3), 228–233 (2019). https://doi.org/10.13171/MJC8319051802HED10.13171/MJC8319051802HED ↗
36. Y. Sakout et al., Structural, microstructural, and dielectric properties of nickel-doped PbTiO3 ceramics synthesized by the hydrothermal process. J. Electron. Mater. 53(1), 141–156 (2023). https://doi.org/10.1007/S11664-023-10741-Y/METRICS10.1007/S11664-023-10741-Y/METRICS ↗
37. M. Belhajji, A. Moutaouaffiq, A. Nfissi, S. Sayouri, T. Dine Lamcharfi, Investigation of the structural, microstructural, and dielectric properties of Ho-doped PbTiO3 for piezoelectric applications. J. Mater. Sci. Mater. Electron. 33(1), 505–521 (2022). https://doi.org/10.1007/S10854-021-07323-1/METRICS10.1007/S10854-021-07323-1/METRICS ↗
38. B. Tiwari, R.N.P. Choudhary, Frequency–temperature response of Pb(Zr0.65−xCexTi0.35)O3 ferroelectric ceramics: structural and dielectric studies. Phys. B 404(21), 4111–4116 (2009). https://doi.org/10.1016/J.PHYSB.2009.07.17110.1016/J.PHYSB.2009.07.171 ↗
39. K. Uchino, S. Nomura, Critical exponents of the dielectric constants in diffused-phase-transition crystals. Ferroelectrics 44(1), 55–61 (1982). https://doi.org/10.1080/0015019820826064410.1080/00150198208260644 ↗
40. D. Viehland, M. Wuttig, L.E. Cross, The glassy behavior of relaxor ferroelectrics. Ferroelectrics 120(1), 71–77 (1991). https://doi.org/10.1080/0015019910821680210.1080/00150199108216802 ↗
41. K. Prompa, E. Swatsitang, T. Putjuso, Very low loss tangent and giant dielectric properties of CaCu3Ti4O12 ceramics prepared by the sol–gel process. J. Mater. Sci. Mater. Electron. 28(20), 15033–15042 (2017). https://doi.org/10.1007/S10854-017-7377-5/METRICS10.1007/S10854-017-7377-5/METRICS ↗
42. J. Li, K. Wu, R. Jia, L. Hou, L. Gao, S. Li, Towards enhanced varistor property and lower dielectric loss of CaCu3Ti4O12 based ceramics. Mater. Des. 92, 546–551 (2016). https://doi.org/10.1016/J.MATDES.2015.12.07310.1016/J.MATDES.2015.12.073 ↗
43. T.B. Adams, D.C. Sinclair, A.R. West, Characterization of grain boundary impedances in fine- and coarse-grained Ca Cu3 Ti4 O12 ceramics. Phys. Rev. B Condens. Matter Mater. Phys. 73(9), 094124 (2006). https://doi.org/10.1103/PHYSREVB.73.094124/FIGURES/11/MEDIUM10.1103/PHYSREVB.73.094124/FIGURES/11/MEDIUM ↗
44. J.F. Wang et al., (Pr Co, Nb)-doped SnO2 varistor ceramics. J. Am. Ceram. Soc. 88(2), 331–334 (2005). https://doi.org/10.1111/J.1551-2916.2005.00095.X10.1111/J.1551-2916.2005.00095.X ↗
45. Z. Cai, X. Wang, W. Hong, B. Luo, Q. Zhao, L. Li, Grain-size–dependent dielectric properties in nanograin ferroelectrics. J. Am. Ceram. Soc. 101(12), 5487–5496 (2018). https://doi.org/10.1111/JACE.1580310.1111/JACE.15803 ↗
46. S.G. Villarreal, D.A. Vázquez Duron, M.I. Pech-Canul, M.B. Hernández, L. Falcon-Franco, J.A. Aguilar-Martínez, The beneficial effect of BaTiO3 on the structure, microstructure, and electrical properties of SnO2-based ceramics. Ceram. Int. 50(1), 927–933 (2024). https://doi.org/10.1016/J.CERAMINT.2023.10.18010.1016/J.CERAMINT.2023.10.180 ↗
47. Y. Huang et al., Effect of holding time on the dielectric properties and non-ohmic behavior of CaCu3Ti4O12 capacitor-varistors. J. Mater. Sci. Mater. Electron. 24(6), 1994–1999 (2013). https://doi.org/10.1007/S10854-012-1047-4/METRICS10.1007/S10854-012-1047-4/METRICS ↗
48. L. Liu et al., Dielectric and nonlinear current-voltage characteristics of rare-earth doped CaCu3Ti4O12 ceramics. J. Appl. Phys. (2011). https://doi.org/10.1063/1.3658258/94528410.1063/1.3658258/945284 ↗