Investigation of the structural, thermo–electrical, and morphological properties of the Bi2O3 ceramics co–doped with rare earths
Source abstract
Abstract
In the present study, Bi2O3 compositions co–doped with different rare earth oxides were synthesized for IT–SOFC units utilizing the solid–state reaction process under atmospheric conditions. The cubic δ-phase, an excellent ion conductor, was effectively stabilized in certain samples, with XRD patterns including only peaks of that phase. Compositions with more than 35% total dopant concentration exhibited multiple phase structures, particularly monoclinic α and R-phases. The diffraction peak for the (111) plane moved to greater diffraction angles as doping concentration increased, indicating the influence of multiple dopants on the structural features. The lack of both endothermic and exothermic peaks in the patterns proved that there is no phase transition. Arrhenius plots revealed that when overall dopant concentration increased, electrical conductivity dropped primarily because of a lack of cation polarizability. The highest conductivity measured at 750 °C was found to be 0.0228 S.cm–1, with a corresponding activation energy of 0.86 eV. The FE-SEM pictures confirmed that grain size was not uniform over the surface, and it shrank substantially as the total dopant concentration progressively increased, indicating enhanced microstrain in the lattice due to excessive doping.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. M.A. Azizi, J. Brouwer, Progress in solid oxide fuel cell–gas turbine hybrid power systems: System design and analysis, transient operation, controls and optimization. Appl. Energy. 215, 237–289 (2018). https://doi.org/10.1016/j.apenergy.2018.01.09810.1016/j.apenergy.2018.01.098 ↗
2. M. Singh, D. Zappa, E. Comini, Solid oxide fuel cell: Decade of progress, future perspectives and challenges. Int. J. Hydrog. 46, 27643–27674 (2021). https://doi.org/10.1016/j.ijhydene.2021.06.02010.1016/j.ijhydene.2021.06.020 ↗
3. E.D. Wachsman, K.T. Lee, Lowering the temperature of solid oxide fuel cells. Science. 334, 935–939 (2011). https://doi.org/10.1126/science.120409010.1126/science.1204090 ↗
4. Z. Zakaria, S.H.A. Hassan, N. Shaari, A.Z. Yahaya, Y.B. Kar, A review on recent status and challenges of yttria stabilized zirconia modification to lowering the temperature of solid oxide fuel cells operation. Int. J. Energy Res. 44, 631–650 (2020). https://doi.org/10.1002/er.494410.1002/er.4944 ↗
5. N. Mahato, A. Banerjee, A. Gupta, S. Omar, K. Balani, Progress in material selection for solid oxide fuel cell technology: a review. Prog Mater. Sci. 72, 141–337 (2015). https://doi.org/10.1016/j.pmatsci.2015.01.00110.1016/j.pmatsci.2015.01.001 ↗
6. S.M. Alirahmi, A.E. Moghadam, Comparative study, working fluid selection, and optimal design of three systems for electricity and freshwater based on solid oxide fuel cell mover cycle. Appl. Energy. 323, 119545 (2022). https://doi.org/10.1016/j.apenergy.2022.11954510.1016/j.apenergy.2022.119545 ↗
7. K.J. Hwang, M. Shina, M. Hyun Lee, H. Lee., M.Y. Oh, T.H. Shin, Investigation on the phase stability of yttria–stabilized zirconia electrolytes for high–temperature electrochemical application. Ceram. Int. 45, 9462–9467 (2019). https://doi.org/10.1016/j.ceramint.2018.09.02610.1016/j.ceramint.2018.09.026 ↗
8. H.T. Ozlu, S. Cakar, E. Ersoy, O. Turkoglu, The bulk electrical conductivity properties of d–Bi2O3 solid electrolyte system doped with Yb2O3. J. Therm. Anal. Calorim. 122, 525–536 (2015). https://doi.org/10.1007/s10973-015-4785-810.1007/s10973-015-4785-8 ↗
9. A.G. Jolley, E.D. Wachsman, A new double Doped Bismuth Oxide with stable ionic conductivity at Intermediate temperatures. ECS Trans. 78, 355 (2017). https://doi.org/10.1149/07801.0355ecst10.1149/07801.0355ecst ↗
10. D.W. Jung, C.N. Juan, K.L. Duncan, S.R. Bishop, E.D. Wachsman, Enhanced long–term stability of bismuth oxide–based electrolytes for operation at 500°C. Ionics. 16, 97–103 (2010). https://doi.org/10.1007/s11581-009-0402-910.1007/s11581-009-0402-9 ↗
11. R. Bhattacharyya, S. Das, S. Omar, High ionic conductivity of Mg2+–doped non–stoichiometric sodium bismuth titanate. Acta Mater. 159, 8–15 (2018). https://doi.org/10.1016/j.actamat.2018.08.00710.1016/j.actamat.2018.08.007 ↗
12. W. Fang, T. Yang, K. Huang, In situ synthesis of a high–performance bismuth oxide based composite cathode for low temperature solid oxide fuel cells. Chem. Commun. 55, 2801–2804 (2019). https://doi.org/10.1039/C9CC00442D10.1039/C9CC00442D ↗
13. P.S. Cardenas, M.T. Ayala, J. Muñoz, A.F. Fuentes, D.A. Leal-Chavez, J.E. Ledezma-Sillas, C. Carreño-Gallardo, Herrera-Ramirez, High ionic conductivity dysprosium and tantalum Co–doped bismuth oxide electrolyte for low–temperature SOFCs. Ionics. 26, 4579–4586 (2020). https://doi.org/10.1007/s11581-020-03572-y10.1007/s11581-020-03572-y ↗
14. T. Kanagaraj, P. Sahay, M. Kumar, R. Kulandaivelu, R. Subramani, R.N. Mohamed, S. Lee, S.W. Chang, W.J. Chung, D.D. Nguyen, Novel pure α–, β–, and mixed–phase α/β–Bi2O3 photocatalysts for enhanced organic dye degradation under both visible light and solar irradiation. Environ. Res. 205, 112439 (2022). https://doi.org/10.1016/j.envres.2021.11243910.1016/j.envres.2021.112439 ↗
15. D.W. Jung, K.T. Lee, E.D. Wachsman, Dysprosium and Gadolinium double Doped Bismuth Oxide Electrolytes for low temperature solid oxide fuel cells. J. Electrochem. Soc. 163, 411–415 (2016). https://doi.org/10.1149/2.0951605jes10.1149/2.0951605jes ↗
16. E.D. Wachsman, S. Boyapati, M.J. Kaufman, N. Jiang, Modeling of ordered structures of phase–stabilized cubic Bismuth Oxides. J. Am. Chem. Soc. 83, 1964–1968 (2004). https://doi.org/10.1111/j.1151-2916.2000.tb01498.x10.1111/j.1151-2916.2000.tb01498.x ↗
17. A. Boumezoued, K. Guergouri, R. Barille, D. Rechem, M. Zaabat, M. Rasheed, ZnO nanopowders doped with bismuth oxide, from synthesis to electrical application. J. Alloys Compd. 791, 550–558 (2019). https://doi.org/10.1016/j.jallcom.2019.03.25110.1016/j.jallcom.2019.03.251 ↗
18. N. Elkhoshkhany, R.E. Mallawany, E. Syala, Mechanical and thermal properties of TeO2–Bi2O3–V2O5–Na2O–TiO2 glass system. Ceram. Int. 42, 19218–19224 (2016). https://doi.org/10.1016/j.ceramint.2016.09.08610.1016/j.ceramint.2016.09.086 ↗
19. P. Temluxame, N. Laosiripojana, S. Assabumrungrat, P. Puengjinda, P. Kim-Lohsoontorn, Phase transformation and electrical properties of bismuth oxide doped scandium cerium and gadolinium stabilized zirconia (0.5Gd0.5Ce10ScSZ) for solid oxide electrolysis cell. Int. J. Hydrog. 45, 29953–29965 (2020). https://doi.org/10.1016/j.ijhydene.2020.08.08510.1016/j.ijhydene.2020.08.085 ↗
20. Y.L. Kuo, L.D. Liu, S.E. Lin, W.C.J. Wei, Assessment of structurally stable cubic Bi12TiO20 as intermediate temperature solid oxide fuels electrolyte. J. Eur. Ceram. 31, 3119–3125 (2011). https://doi.org/10.1016/j.jeurceramsoc.2011.04.03910.1016/j.jeurceramsoc.2011.04.039 ↗
21. S. Bandyopadhyay, A. Dutta, Thermal, optical and dielectric properties of phase stabilized δ – Dy–Bi2O3 ionic conductors. J. Phys. Chem. Solids. 102, 12–20 (2015). https://doi.org/10.1016/j.jpcs.2016.11.00110.1016/j.jpcs.2016.11.001 ↗
22. X. Wang, W. Zhou, J.B. De Lisio, G.C. Egana, M.R. Zachariah, Doped δ–bismuth oxides to investigate oxygen ion transport as a metric for condensed phase thermite ignition. Phys. Chem. Chem. Phys. 19, 12749–12758 (2017). https://doi.org/10.1039/C6CP08532F10.1039/C6CP08532F ↗
23. V.A. Sadykov, M.S. Koroleva, I.V. Piir, N.V. Chezhina, D.A. Korolev, P.I. Skriabin, A.V. Krasnov, E.M. Sadovskaya, N.F. Eremeev, S.V. Nekipelov, V.N. Sivkov, Structural and transport properties of doped bismuth titanates and niobates. Solid State Ion. 315, 33–39 (2018). https://doi.org/10.1016/j.ssi.2017.12.00810.1016/j.ssi.2017.12.008 ↗
24. M. Balci, A. Cengel, M. Ari, The microstructure and thermo–electrical characterization of the Tb–Gd–Ho co–doped stabilized Bi2O3 based solid electrolyte systems. Chin. J. Phys. 79, 89–97 (2022). https://doi.org/10.1016/j.cjph.2022.08.00510.1016/j.cjph.2022.08.005 ↗
25. I. Ermis, S.P.S. Shaikh, Study of crystallographic, thermal and electrical properties of (Bi2O3)1–x–y(Tb4O7)x(Gd2O3)y electrolyte for SOFC application. Ceram. Int. 44, 18776–18782 (2018). https://doi.org/10.1016/j.ceramint.2018.07.10910.1016/j.ceramint.2018.07.109 ↗
26. M. Balci, B. Saatci, S. Cerit, M. Ari, The synthesis of Eu–Tb–Ho co–doped Bi2O3–based ceramic powders for use in intermediate temperature–SOFCs. Solid State Ion. 387, 116060 (2022). https://doi.org/10.1016/j.ssi.2022.11606010.1016/j.ssi.2022.116060 ↗
27. R. Yogamalar, R. Srinivasan, A. Vinu, K. Ariga, A.C. Bose, X–ray peak broadening analysis in ZnO nanoparticles. Solid State Commun. 149, 1919–1923 (2009). https://doi.org/10.1016/j.ssc.2009.07.04310.1016/j.ssc.2009.07.043 ↗
28. J. Hou, L. Bi, J. Qian, Z. Zhu, Y. Zhao, H. Zhang, Study of the Crystal structures of New buffer materials Bi 1 – x Y x O 1.5. J. Supercond. Nov Magn. 23, 1011–1014 (2010). https://doi.org/10.1007/s10948-009-0615-110.1007/s10948-009-0615-1 ↗
29. T. Chou, L.D. Liu, W.C.J. Wei, Phase stability and electric conductivity of Er2O3–Nb2O5 co–doped Bi2O3 electrolyte. J. Eur. Ceram. 31, 3087–3094 (2011). https://doi.org/10.1016/j.jeurceramsoc.2011.04.01610.1016/j.jeurceramsoc.2011.04.016 ↗
30. I. Ermis, M. Sertkol, V. Corumlu, Y. Dagdemir, M. Arı, Synthesis of (Bi2O3)0.9–x(Tb4O7)0.1(Sm2O3)x electrolyte for IT–SOFCs. Inorg. Nano–Met Chem. 48, 91–95 (2018). https://doi.org/10.1080/15533174.2016.115782210.1080/15533174.2016.1157822 ↗
31. M. Balci, B. Saatci, H. Turk, M. Ari, Effect of ratios of dopant contents on the electrical conductivity of Bi2O3 ceramics co–doped with some rare earth oxides. Mater. Today Commun. 33, 104542 (2022). https://doi.org/10.1016/j.mtcomm.2022.10454210.1016/j.mtcomm.2022.104542 ↗
32. I. Ermis, M. Ari, S.D. Acer, Y. Dağdemir, Phase stability and electric conductivity of Eu2O3–Tb4O7 co–doped Bi2O3 electrolyte. Int. J. Hydrog Energy. 40, 9485–9490 (2015). https://doi.org/10.1016/j.ijhydene.2015.05.09810.1016/j.ijhydene.2015.05.098 ↗
33. E.D. Wachsman, Effect of oxygen sublattice order on conductivity in highly defective fluorite oxides. J. Eur. Ceram. Soc. 24, 1281–1285 (2004). https://doi.org/10.1016/S0955-2219(03)00509-010.1016/S0955-2219(03)00509-0 ↗
34. N. Jiang, E.D. Wachsman, Structural Stability and Conductivity of phase–stabilized cubic Bismuth Oxides. J. Am. Ceram. Soc. 82, 3057–3064 (1999). https://doi.org/10.1111/j.1151-2916.1999.tb02202.x10.1111/j.1151-2916.1999.tb02202.x ↗
35. H.O. Torun, S. Çakar, Thermal characterization of Er–doped and Er–Gd co–doped ceria–based electrolyte materials for SOFC. J. Therm. Anal. Calorim. 133, 1233–1239 (2018). https://doi.org/10.1007/s10973-018-7189-810.1007/s10973-018-7189-8 ↗
36. S. Koçyiğit, Boron and praseodymium doped bismuth oxide nanocomposites: Preparation and sintering effects. J. Alloys Compd. 740, 941–948 (2018). https://doi.org/10.1016/j.jallcom.2018.01.02010.1016/j.jallcom.2018.01.020 ↗
37. E.D. Wachsman, S. Boyapati, N. Jiang, Effect of dopant polarizability on oxygen sublattice order in phase–stabilized cubic bismuth oxides. Ionics. 7, 1–6 (2001). https://doi.org/10.1007/BF0237546010.1007/BF02375460 ↗
38. T.B. Trana, A. Navrotsky, Energetics of disordered and ordered rare earth oxide–stabilized bismuth oxide ionic conductors. Phys. Chem. Chem. Phys. 16, 2331–2337 (2014). https://doi.org/10.1039/C3CP54553A10.1039/C3CP54553A ↗
39. S. Bandyopadhyay, A.A. Dutta, Structural insight into the electrical properties of Dy–Ho co–doped phase stabilized Bismuth Oxide based electrolytes. J. Electroanal. Chem. 817, 55–64 (2018). https://doi.org/10.1016/j.jelechem.2018.03.06310.1016/j.jelechem.2018.03.063 ↗
40. S. Dilpuneet, J.C. Aidhy, B.N. Susan, E.D. Wachsman, S.R. Phillpot, Vacancy–ordered structure of cubic Bismuth Oxide from Simulation and Crystallographic Analysis. J. Am. Ceram. Soc. 91, 2349–2356 (2008). https://doi.org/10.1111/j.1551-2916.2008.02463.x10.1111/j.1551-2916.2008.02463.x ↗
41. D.W. Jung, K.L. Duncan, E.D. Wachsman, Effect of total dopant concentration and dopant ratio on conductivity of (DyO1.5)x–(WO3)y–(BiO1.5)1 – x–y. Acta Mater. 58, 355–363 (2010). https://doi.org/10.1016/j.actamat.2009.08.07210.1016/j.actamat.2009.08.072 ↗
42. N. Jaiswal, B. Gupta, D. Kumar, O. Parkash, Effect of addition of erbium stabilized bismuth oxide on the conductivity of lanthanum doped ceria solid electrolyte for IT–SOFCs. J. Alloys Compd. 633, 174–182 (2015). https://doi.org/10.1016/j.jallcom.2014.12.24310.1016/j.jallcom.2014.12.243 ↗
43. S. Koçyiğit, Ö. Gökmen, S. Temel, A. Aytimur, İ. Uslu, S.H. Bayari, Structural investigation of boron undoped and doped indium stabilized bismuth oxide nanoceramic powders. Ceram. Int. 39, 7767–7772 (2013). https://doi.org/10.1016/j.ceramint.2013.03.03510.1016/j.ceramint.2013.03.035 ↗
44. M. Arı, M. Balcı, Y. Polat, Synthesis and characterization of (Bi2O3)1 – x–y – z(Gd2O3)x (Sm2O3)y(Eu2O3)z quaternary solid solutions for solid oxide fuel cell. Chin. J. Phys. 56, 2958–2966 (2018). https://doi.org/10.1016/j.cjph.2018.10.00110.1016/j.cjph.2018.10.001 ↗
45. A. Aytimur, S. Koçyiğit, İ. Uslu, Ş. Durmuşoğlu, A. Akdemir, Fabrication and characterization of bismuth oxide–holmia nanofibers and nanoceramics. Curr. Appl. Phys. 13, 581–558 (2013). https://doi.org/10.1016/j.cap.2012.10.00210.1016/j.cap.2012.10.002 ↗