Spark plasma sintering of Ti–1Al–8V–5Fe alloy: densification mechanism and grain growth
Source abstract
Abstract
The Ti–1Al–8V–5Fe (Ti185) alloys were prepared by spark plasma sintering (SPS) from TiH2, FeV, Al and Fe powders. The densification mechanism and grain-growth behavior of as-sintered alloys during SPS were investigated at temperatures of 800–1200 °C. A modified creep model considering liquid phase is proposed to modify the deviation of effective stress. The result shows that liquid phase caused by low-melting-point elemental powder can increase the effective stress, which enhances the particle rearrangement and densification. Densification stage at low temperature (800–1000 °C) without obvious grain growth and grain growth stage at 1100–1200 °C were identified during SPS process. At early densification stage, it is controlled by diffusion-controlled grain boundary sliding where the stress exponent n is close to 1, while at next stage, it is dominated by dislocation-climbing corresponding to the n close to 3. The grain-growth mechanism of SPS Ti185 during grain-growth stage was under the control of bulk and grain boundary diffusion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. A. Devaraj, V.V. Joshi, A. Srivastava et al., Nat. Commun. 7, 11176 (2016)10.1038/ncomms11176 ↗
2. V.V. Joshi, C. Lavender, V.S. Moxson et al., J. Mater. Eng. Perform. 22, 995 (2013)10.1007/s11665-012-0386-x ↗
3. W. Gerhard, R.R. Boyer, E.W. Collings, Materials Properties Handbook: Titanium Alloys (ASM Intl, Materials Park, 1994)
4. J.G. Ferrero, Rare. Metal. Mat. Eng. 35, 209 (2006)
5. F.H. Froes, M.A. Imam, Key Eng. Mater. 436, 1 (2010)10.4028/www.scientific.net/KEM.436.1 ↗
6. A. Hamid, Z. Hatem, Addit. Manuf. 21, 529 (2018)
7. S. Gao, P. Liu, C. Wang et al., Powder metallurgy. Technology. 32, 427 (2014)
8. Y. Zhang, C. Wang, Y. Zhang et al., Mater. Manuf. Process. 32, 1869 (2017)10.1080/10426914.2017.1303163 ↗
9. Y. Zhang, Z. Zhang, S. Liu et al., Mater. Manuf. Process. 33, 1830 (2018)10.1080/10426914.2018.1476762 ↗
10. Z.A. Munir, U. Anselmi-Tamburini, M. Ohyanagi, J. Mater. Sci. 41, 763 (2006)10.1007/s10853-006-6555-2 ↗
11. N.S. Weston, F. Derguti, A. Tudball et al., J. Mater. Sci. 50, 4860 (2015)10.1007/s10853-015-9029-6 ↗
12. Y. Wang, C. Zhang, Y. Liu et al., Mater. Charact. 128, 75 (2017)10.1016/j.matchar.2017.03.016 ↗
13. J. Wang, Y. Wang, Y. Liu et al., Intermetallics 64, 70 (2015)10.1016/j.intermet.2015.04.016 ↗
14. H. Chen, F. Zeng, W. Li et al., Ceram. Int. 45, 12122 (2019)10.1016/j.ceramint.2019.03.112 ↗
15. J. Liu, F. Zeng, Z. Zou, J. Mater. Res. 32, 3425 (2017)10.1557/jmr.2017.205 ↗
16. C. Yang, M.D. Zhu, Scripta Mater. 139, 96 (2017)10.1016/j.scriptamat.2017.06.034 ↗
17. G. Bernard-Granger, C. Guizard, Acta Mater. 55, 3493 (2007)10.1016/j.actamat.2007.01.048 ↗
18. G. Bernard-Granger, C. Guizard, J. Mater. Res. 24, 179 (2009)10.1557/JMR.2009.0025 ↗
19. R.J. Brook, E. Gilbert, D. Hind, J.M. Vieira, in Sintering Theory and Practice, ed. by D. Kolar, S. Pejovnik, M.M. Ristic (Elsevier, Amsterdam, 1982), p. 585
20. M. Zhang, R. Li, T. Yuan et al., Scripta Mater. 163, 34 (2019)10.1016/j.scriptamat.2018.12.036 ↗
21. G. Bernard-Granger, A. Addad, G. Fantozzi et al., Acta Mater. 58, 3390 (2010)10.1016/j.actamat.2010.02.013 ↗
22. M. Gendre, A. Maître, G. Trolliard, Acta Mater. 58, 2598 (2010)10.1016/j.actamat.2009.12.046 ↗
23. J.G. Santanach, A. Weibel, C. Estournès et al., Acta Mater. 59, 1400 (2011)10.1016/j.actamat.2010.11.002 ↗
24. G. Bernard-Granger, N. Benameur, A. Addad et al., J. Mater. Res. 24, 2011 (2009)10.1557/jmr.2009.0243 ↗
25. L. Ramond, G. Bernard-Granger, A. Addad et al., Acta Mater. 58, 5120 (2010)10.1016/j.actamat.2010.05.047 ↗
26. G. Bernard-Granger, N. Amandine, C. Navone et al., J. Mater. Sci. 47, 4313 (2012)10.1007/s10853-012-6282-9 ↗
27. A.S. Helle, K.E. Easterling, M.F. Ashby, Acta Metall. 33, 2163 (1985)10.1016/0001-6160(85)90177-4 ↗
28. D.C.C. Lam, F.F. Lange, A.G. Evans, J. Am. Ceram. Soc. 77, 2113 (1994)10.1111/j.1151-2916.1994.tb07105.x ↗
29. X. Ma, F. Li, J. Cao et al., J. Alloy. Compd. 703, 298 (2017)10.1016/j.jallcom.2017.01.235 ↗
30. J. Dong, F. Li, C. Wang, Mater. Sci. Eng. A. 580, 105 (2013)10.1016/j.msea.2013.05.032 ↗
31. Y.F. Yang, S.D. Luo, G.B. Schaffer et al., Mater. Sci. Eng. A. 528, 6719 (2011)10.1016/j.msea.2011.05.041 ↗
32. B.B. Panigrahi, M.M. Godkhindi, K. Das et al., Mater. Sci. Eng. A. 396, 255 (2005)10.1016/j.msea.2005.01.016 ↗
33. G. Antou, P. Guyot, N. Pradeilles et al., J. Mater. Sci. 50, 2327 (2015)10.1007/s10853-014-8804-0 ↗
34. J. Kozlík, H. Becker, J. Stráský et al., Mater. Sci. Eng. A 772, 138783 (2020)10.1016/j.msea.2019.138783 ↗
35. S. Deng, T. Yuan, R. Li et al., Powder. Technol. 310, 264 (2017)10.1016/j.powtec.2017.01.050 ↗
36. W.D. Kingery, J. Appl. Phys. 30, 301 (1959)10.1063/1.1735155 ↗
37. W.D. Kingery, M.D. Narasimhan, J. Appl. Phys. 30, 307 (1959)10.1063/1.1735156 ↗
38. E. Carnall, Mater. Res. Bull. 2, 1075 (1967)10.1016/0025-5408(67)90135-3 ↗
39. S.J.L. Kang, K.H. Kim, D.N. Yoon, J. Am. Ceram. Soc. 74, 425 (1991)10.1111/j.1151-2916.1991.tb06900.x ↗
40. S.M. Lee, S.J.L. Kang, Acta Mater. 46, 3191 (1998)10.1016/S1359-6454(97)00489-8 ↗
41. J. Weertman, Trans. Am. Soc. Met. 61, 681 (1968)
42. J. Weertman, J. Appl. Phys. 28, 362 (1957)10.1063/1.1722747 ↗
43. R. Chaim, A. Shlayer, C. Estournes, J. Eur. Ceram. Soc. 29, 91 (2009)10.1016/j.jeurceramsoc.2008.05.043 ↗
44. K.B. Alexander, P.F. Becher, S.B. Waters et al., J. Am. Ceram. Soc. 77, 939 (1994)10.1111/j.1151-2916.1994.tb07250.x ↗