Simulation of heat transfer and dendrite growth during the arc deposition of nickel-based superalloy via finite element-phase field modeling
Source abstract
Abstract
In this work, a macro–micro Finite Element-Phase Field (FE-PF) model is proposed to simulate the heat transfer and dendrite growth during the arc deposition of IN718 alloys. Macroscopic heat transfers are simulated using the macroscopic FE model. According to the simulated temperature profile, nonlinear temperature gradient G and solidification rate R are calculated. Microscopic dendritic growth in the molten pool is simulated using the microscopic PF model with G and R. Morphologies of simulated columnar grains are dendritic. Primary dendrite arm spacing (PDAS) changes slightly in different layers due to similar cooling rates G × R. Laves phases form in the interdendritic area owing to the segregation. Simulated morphologies of Laves phases show a strong dependence on the dendritic morphologies. The simulation results are in good agreement with the experimental results.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. X. Lu, Y. Ma, D. Wang, On the hydrogen embrittlement behavior of nickel-based alloys: alloys 718 and 725. Mater. Sci. Eng. A 1, 9785 (2020)
2. R. Sokkalingam, B. Pravallika, K. Sivaprasad et al., Dissimilar welding of high-entropy alloy to Inconel 718 superalloy for structural applications. J. Mater. Res. 1, 1 (2021)
3. D. Jafari, T. Vaneker, I. Gibson, Wire and arc additive manufacturing: Opportunities and challenges to control the quality and accuracy of manufactured parts. Mater. Des. 1, 9471 (2021)
4. K.N. Amato, S.M. Gaytan, L.E. Murr, E. Martinez, P.W. Shindo, J. Hernandez, S. Collins, F. Medina, Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting. Acta Mater. 60, 2229–2239 (2012)10.1016/j.actamat.2011.12.032 ↗
5. S. Chandra, X. Tan, R.L. Narayan et al., A generalised hot cracking criterion for nickel-based superalloys additively manufactured by electron beam melting. Addit. Manuf. 37, 101633 (2021)
6. Y. Wang, X. Chen, Q. Shen et al., Effect of magnetic Field on the microstructure and mechanical properties of inconel 625 superalloy fabricated by wire arc additive manufacturing. J. Manuf. Process. 64, 10–19 (2021)10.1016/j.jmapro.2021.01.008 ↗
7. R.I. Badiger, S. Narendranath, M.S. Srinath, Joining of Inconel-625 alloy through microwave hybrid heating and its characterization. J. Manuf. Process. 18, 117–123 (2015)10.1016/j.jmapro.2015.02.002 ↗
8. X. Xu, J. Ding, S. Ganguly et al., Investigation of process factors affecting mechanical properties of INCONEL 718 superalloy in wire + arc additive manufacture process. J. Mater. Process Tech. 265, 201–209 (2019)10.1016/j.jmatprotec.2018.10.023 ↗
9. R.R. Ye, H.Y. Li, R.G. Ding et al., Microstructure and microhardness of dissimilar weldment of Ni-based superalloys IN718-IN713LC. Mater. Sci. Eng. A 774, 138894 (2020)10.1016/j.msea.2019.138894 ↗
10. W. Ou, G.L. Knapp, T. Mukherjee et al., An improved heat transfer and fluid flow model of wire-arc additive manufacturing. Int. J. Heat Mass Tran. 167, 120835 (2021)10.1016/j.ijheatmasstransfer.2020.120835 ↗
11. T. Abe, J. Kaneko, H. Sasahare, Thermal sensing and heat input control for thin-walled structure building based on numerical simulation for wire and arc additive manufacturing. Addit. Manuf. 35, 101357 (2020)
12. H. Huang, N. Ma, J. Chen et al., Toward large-scale simulation of residual stress and distortion in wire and arc additive manufacturing. Addit. Manuf. 34, 101248 (2020)
13. T. Rabczuk, H. Ren, X. Zhuang, CMC-Comput. Mat. Contin. 59, 31 (2019)
14. H. Ren, X. Zhuang, T. Rabczuk, H. Zhu, Eng. Anal. Bound. Elem. 108, 15 (2019)10.1016/j.enganabound.2019.05.024 ↗
15. X. Zhuang, H. Ren, T. Rabczuk, Eur. J. Mech. A-Solids 90, 104380 (2021)10.1016/j.euromechsol.2021.104380 ↗
16. H. Ren, X. Zhuang, T. Rabczuk, Comput. Meth. Appl. Mech. Eng. 367, 113132 (2020)10.1016/j.cma.2020.113132 ↗
17. X. Ao, H. Xia, J. Liu et al., Simulations of microstructure coupling with moving molten pool by selective laser melting using a cellular automaton. Mater. Des. 185, 108230 (2019)10.1016/j.matdes.2019.108230 ↗
18. T. Zhang, S.H. Lu, Y.X. Wu et al., Optimization of deformation parameters of dynamic recrystallization for 7055 aluminum alloy by cellular automaton. Trans. Nonferrous Metals Soc. China 27(6), 1327–1337 (2017)10.1016/S1003-6326(17)60154-7 ↗
19. Y. Lian, Z. Gan, C. Yu et al., A cellular automaton finite volume method for microstructure evolution during additive manufacturing. Mater. Design 169, 107672 (2019)10.1016/j.matdes.2019.107672 ↗
20. L. Wang, Y. Huang, D. Yang et al., Multi-scale simulation of grain growth during laser beam welding of nickel-based superalloy. J. Mater. Res. Technol. 9(6), 15034–15044 (2020)10.1016/j.jmrt.2020.10.091 ↗
21. B. Asya, B. Xjya, C. Hmgb, Phase field lattice Boltzmann model for non-dendritic structure formation in aluminum alloy from LSPSF machine. Trans. Nonferrous Metals Soc. China 30(3), 559–570 (2020)10.1016/S1003-6326(20)65235-9 ↗
22. N.S. Bailey, K.M. Hong, Y.C. Shin, Comparative assessment of dendrite growth and microstructure predictions during laser welding of Al 6061 via 2D and 3D phase field models. Comp. Mater. Sci. 172, 109291 (2020)10.1016/j.commatsci.2019.109291 ↗
23. H. Ren, X. Zhuang, T. Rabczuk, Comput. Meth. Appl. Mech. Eng. 318, 762 (2017)10.1016/j.cma.2016.12.031 ↗
24. H.L. Wei, J.W. Elmer, T. Debroy, Three-dimensional modeling of grain structure evolution during welding of an aluminum alloy. Acta Mater. 126, 413–425 (2017)10.1016/j.actamat.2016.12.073 ↗
25. H.L. Wei, G.L. Knapp, T. Mukherjee et al., Three-dimensional grain growth during printing of a nickel-based alloy Inconel 718. Addit. Manuf. 25, 448–459 (2018)
26. S. Sunny, H. Yu, R. Mathews et al., Improved grain structure prediction in metal additive manufacturing using a dynamic kinetic Monte Carlo framework. Addit. Manuf. 37, 101649 (2020)
27. R. Geng, J. Du, Z. Wei et al., Multiscale modelling of microstructure, micro-segregation, and local mechanical properties of Al-Cu alloys in wire and arc additive manufacturing. Addit. Manuf. 36, 1735 (2020)
28. A. Rai, H. Helmer, Simulation of grain structure evolution during powder bed based additive manufacturing. Addit. Manuf. 13, 124–134 (2016)
29. S. Paul, J. Liu, S.T. Strayer et al., A discrete dendrite dynamics model for epitaxial columnar grain growth in metal additive manufacturing with application to inconel. Addit. Manuf. 36, 101611 (2020)
30. W. Xiao, S. Li, C. Wang et al., Multi-scale simulation of dendrite growth for direct energy deposition of nickel-based superalloys. Mater. Des. 164, 107553 (2018)10.1016/j.matdes.2018.107553 ↗
31. M.S. Mohebbi, V. Ploshikhin, Implementation of nucleation in cellular automaton simulation of microstructural evolution during additive manufacturing of Al alloys. Addit. Manuf. 36, 101726 (2020)
32. X. Zhan, X. Lin, Z. Gao et al., Modeling and simulation of the columnar-to-equiaxed transition during laser melting deposition of Invar alloy. J. Alloy Compd. 755, 123–134 (2018)10.1016/j.jallcom.2018.04.313 ↗
33. J. Goldak, A. Chakravarti, M. Bibby, A new finite element model for welding heat sources. Metall. Trans. B 15(2), 299–305 (1984)10.1007/BF02667333 ↗
34. S. Kou, Welding metallurgy, 2nd edn. (John Wiley and Sons, Hoboken, NJ, 2003)
35. B. Echebarria, R. Folch, A. Karma et al., Quantitative phase-field model of alloy solidification. Phys. Rev. E 70(6), 0161604 (2004)10.1103/PhysRevE.70.061604 ↗
36. B. Echebarria, A. Karma, S. Gurevich, Onset of sidebranching in directional solidification. Phys. Rev. E 81(2), 021608 (2010)10.1103/PhysRevE.81.021608 ↗
37. T. Keller, G. Lindwall, S. Ghosh, L. Ma, B.M. Lane, F. Zhang et al., Application of finite element, phase-field, and CALPHADbased methods to additive manufacturing of Ni-based superalloys. Acta Mater. 139, 244–253 (2017)10.1016/j.actamat.2017.05.003 ↗
38. M. Ashour, N. Valizadeh, T. Rabczuk, Comput. Meth. Appl. Mech. Eng. 377, 113669.10.1016/j.cma.2021.113669 ↗
39. N. Valizadeh, T. Rabczuk, Comput. Meth. Appl. Mech. Eng. 388, 114191 (2022).10.1016/j.cma.2021.114191 ↗
40. N. Valizadeh, T. Rabczuk, Comput. Meth. Appl. Mech. Eng. 351, 599 (2019)10.1016/j.cma.2019.03.043 ↗
41. W.J. Zheng, Z.B. Dong, Y.H. Wei et al., Phase field investigation of dendrite growth in the welding pool of aluminum alloy 2A14 under transient conditions. Comput. Mater. Sci. 82, 525–530 (2014)10.1016/j.commatsci.2013.08.022 ↗
42. G.X. Mi et al., Two-dimensional phase-field simulations of competitive dendritic growth during laser welding. Mater. Des. 181, 107980–107980 (2022)
43. L.W. Wang et al., Macro-micro modeling and simulation on columnar grains growth in the laser welding pool of aluminum alloy. Int. J. Heat Mass Transfer 123, 826–838 (2018)10.1016/j.ijheatmasstransfer.2018.03.037 ↗
44. J.D. Hunt. Cellular and primary dendrite spacings,solidification and casting of metals. Sheffield, England: Proc.Conf.; July 1977. p. 3–9 (1979).
45. F. Yu, Y. Wei, Effect of surface tension anisotropy and welding parameters on initial instability dynamics during solidification: a phase-field study. Metall. Mater. Trans. A 49, 3293–3305 (2018)10.1007/s11661-018-4663-7 ↗
46. P.L. Nie, O.A. Ojo, Z.G. Li, Modeling analysis of laser cladding of a nickel-based superalloy. Surf. Coating. Technol. 258, 1048–1059 (2014)10.1016/j.surfcoat.2014.07.030 ↗
47. M. Ma, Z. Wang, X. Zeng, Effect of energy input on microstructural evolution of direct laser fabricated IN718 alloy. Mater. Charact. 106, 420–427 (2015)10.1016/j.matchar.2015.06.027 ↗
48. H. Xie, K. Yang, F. Li, C. Sun, Z. Yu, Investigation on the Laves phase formation during laser cladding of IN718 alloy by CA-FE. J. Manuf. Process 52, 132–144 (2020)10.1016/j.jmapro.2020.01.050 ↗
49. Y. Chen, Y. Guo, M. Xu et al., Study on the element segregation and Laves phase formation in the laser metal deposited IN718 superalloy by flat top laser and gaussian distribution laser. Mater. Sci. Eng. A 754, 339–347 (2019)10.1016/j.msea.2019.03.096 ↗