Laser powder-bed fusion of biodegradable Fe–Mn alloy: melt-pool solidification
Source abstract
Abstract
As biodegradable materials, Fe–Mn alloys have a lot of promise, particularly because they can be employed as metallic implants with excellent mechanical properties. Besides allowing for patient customisation, powder-bed fusion of these alloys could help overcome their main drawback, i.e., slow degradation inside the human body, by increasing the component surface with inbuilt structural porosity. The quality of additive-manufactured products depends on their temperature history, making knowledge of the heat-transfer characteristics of the powder-bed fusion process very important. While accurate determinations of temperature gradients and the melt-pool sizes still represent a considerable challenge for all materials, this is particularly true for Fe–Mn alloys, where research is currently limited to a handful of pioneering works, and experimental determinations of the melt-pool contours prove extremely difficult and unreliable. To explore the origins of measurement inconsistency, melt-pool compositions of Fe–Mn specimens were analysed in the scope of this research. Concentric patterns of high- and low-Mn content practically indistinguishable from the melt-pool boundary on the macroscale were revealed within the melt-pool. A microscopic analysis of elemental content distribution was performed and the concentric patterns were attributed to the pronounced segregation of the alloy in conjunction with convective currents. A novel, calibration-free 3D finite-element model of heat transfer during laser powder-bed fusion is proposed to overcome these experimental difficulties and validated against the experimental melt-pool measurements.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. H. Hermawan, Biodegradable metals: from concept to applications (Springer Science & Business Media, New York, 2012)10.1007/978-3-642-31170-3 ↗
2. H. Hermawan, Updates on the research and development of absorbable metals for biomedical applications. Prog. Biomater. 7(2), 93–110 (2018)10.1007/s40204-018-0091-4 ↗
3. M.F. Ulum, W. Caesarendra, R. Alavi, H. Hermawan, In-vivo corrosion characterization and assessment of absorbable metal implants. Coatings 9(5), 282 (2019)10.3390/coatings9050282 ↗
4. K. Yang, C. Zhou, H. Fan, Y. Fan, Q. Jiang, P. Song et al., Bio-functional design, application and trends in metallic biomaterials. Int. J. Mol. Sci. 19(1), 24 (2018)10.3390/ijms19010024 ↗
5. M. Prakasam, J. Locs, K. Salma-Ancane, D. Loca, A. Largeteau, L. Berzina-Cimdina, Biodegradable materials and metallic implants—a review. J. Funct. Biomater. 8(4), 44 (2017)10.3390/jfb8040044 ↗
6. M. Otto, S. Pilz, A. Gebert, U. Kühn, J. Hufenbach, Effect of build orientation on the microstructure, mechanical and corrosion properties of a biodegradable high manganese steel processed by laser powder bed fusion. Metals 11(6), 944 (2021)10.3390/met11060944 ↗
7. J. Hufenbach, H. Wendrock, F. Kochta, U. Kühn, A. Gebert, Novel biodegradable Fe-Mn-CS alloy with superior mechanical and corrosion properties. Mater. Lett. 186, 330–333 (2017)10.1016/j.matlet.2016.10.037 ↗
8. A. Drynda, T. Hassel, F.W. Bach, M. Peuster, In vitro and in vivo corrosion properties of new iron-manganese alloys designed for cardiovascular applications. J. Biomed. Mater. Res. B Appl. Biomater. 103(3), 649–660 (2015)10.1002/jbm.b.33234 ↗
9. Č Donik, A. Kocijan, I. Paulin, M. Hočevar, P. Gregorčič, M. Godec, Improved biodegradability of Fe-Mn alloy after modification of surface chemistry and topography by a laser ablation. Appl. Surf. Sci. 453, 383–393 (2018)10.1016/j.apsusc.2018.05.066 ↗
10. W.J. Lin, D.Y. Zhang, G. Zhang, H.T. Sun, H.P. Qi, L.P. Chen et al., Design and characterization of a novel biocorrodible iron-based drug-eluting coronary scaffold. Mater. Design 91, 72–79 (2016)10.1016/j.matdes.2015.11.045 ↗
11. Y. Feng, N. Gaztelumendi, J. Fornell, H. Zhang, P. Solsona, M. Baró et al., Mechanical properties, corrosion performance and cell viability studies on newly developed porous Fe-Mn-Si-Pd alloys. J. Alloy. Compd. 724, 1046–1056 (2017)10.1016/j.jallcom.2017.07.112 ↗
12. M. Badrossamay, T.H.C. Childs, Further studies in selective laser melting of stainless and tool steel powders. Int. J. Mach. Tools Manufa. 47(5 SPEC. ISS.), 779–784 (2007)10.1016/j.ijmachtools.2006.09.013 ↗
13. M.M. Francois, A. Sun, W.E. King, N.J. Henson, D. Tourret, C.A. Bronkhorst et al., Modeling of additive manufacturing processes for metals: challenges and opportunities. Curr. Opin. Solid State Mater. Sci. 21(4), 198–206 (2017)10.1016/j.cossms.2016.12.001 ↗
14. N. Raghavan, R. Dehoff, S. Pannala, S. Simunovic, M. Kirka, J. Turner et al., Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing. Acta Mater. 112, 303–314 (2016)10.1016/j.actamat.2016.03.063 ↗
15. S.M. Thompson, L. Bian, N. Shamsaei, A. Yadollahi, An overview of direct laser deposition for additive manufacturing; part I: transport phenomena, modeling and diagnostics. Addit. Manuf. 8, 36–62 (2015)
16. T. DebRoy, H. Wei, J. Zuback, T. Mukherjee, J. Elmer, J. Milewski et al., Additive manufacturing of metallic components-process, structure and properties. Prog. Mater Sci. 92, 112–224 (2018)10.1016/j.pmatsci.2017.10.001 ↗
17. A. Ilin, R. Logvinov, A. Kulikov, A. Prihodovsky, H. Xu, V. Ploshikhin et al., Computer aided optimisation of the thermal management during laser beam melting process. Phys. Proc. 56(C), 390–399 (2014)10.1016/j.phpro.2014.08.142 ↗
18. A. Foroozmehr, M. Badrossamay, E. Foroozmehr, S. Golabi, Finite element simulation of selective laser melting process considering optical penetration depth of laser in powder bed. Mater. Design 89, 255–263 (2016)10.1016/j.matdes.2015.10.002 ↗
19. Y. Shu, D. Galles, O.A. Tertuliano, B.A. McWilliams, N. Yang, W. Cai et al., A critical look at the prediction of the temperature field around a laser-induced melt pool on metallic substrates. Sci. Rep. 11(1), 1–11 (2021)10.1038/s41598-021-91039-z ↗
20. Y. Qin, P. Wen, H. Guo, D. Xia, Y. Zheng, L. Jauer et al., Additive manufacturing of biodegradable metals: current research status and future perspectives. Acta Biomater. 98, 3–22 (2019)10.1016/j.actbio.2019.04.046 ↗
21. H. Hermawan, D. Mantovani, Process of prototyping coronary stents from biodegradable Fe-Mn alloys. Acta Biomater. 9(10), 8585–8592 (2013)10.1016/j.actbio.2013.04.027 ↗
22. D. Carluccio, C. Xu, J. Venezuela, Y. Cao, D. Kent, M. Bermingham et al., Additively manufactured iron-manganese for biodegradable porous load-bearing bone scaffold applications. Acta Biomater. 103, 346–360 (2020)10.1016/j.actbio.2019.12.018 ↗
23. H. Hermawan, A. Purnama, D. Dube, J. Couet, D. Mantovani, Fe-Mn alloys for metallic biodegradable stents: degradation and cell viability studies. Acta Biomater. 6(5), 1852–1860 (2010)10.1016/j.actbio.2009.11.025 ↗
24. D. Hong, D.T. Chou, O.I. Velikokhatnyi, A. Roy, B. Lee, I. Swink et al., Binder-jetting 3D printing and alloy development of new biodegradable Fe-Mn-Ca/Mg alloys. Acta Biomater. 45, 375–386 (2016)10.1016/j.actbio.2016.08.032 ↗
25. J. Venezuela, M. Dargusch, Addressing the slow corrosion rate of biodegradable Fe-Mn: current approaches and future trends. Curr. Opin. Solid State Mater. Sci. 24(3), 100822 (2020)10.1016/j.cossms.2020.100822 ↗
26. M. Schinhammer, A.C. Hänzi, J.F. Löffler, P.J. Uggowitzer, Design strategy for biodegradable Fe-based alloys for medical applications. Acta Biomater. 6(5), 1705–1713 (2010)10.1016/j.actbio.2009.07.039 ↗
27. Č Donik, J. Kraner, A. Kocijan, I. Paulin, M. Godec, Evolution of the $$\varepsilon $$ and $$\gamma $$ phases in biodegradable Fe-Mn alloys produced using laser powder-bed fusion. Sci. Rep. 11(1), 1–10 (2021)10.1038/s41598-021-99042-0 ↗
28. T. Mede, A. Kocjan, I. Paulin, M. Godec, Numerical mesoscale modelling of microstructure evolution during selective laser melting. Metals 10(6), 800 (2020)10.3390/met10060800 ↗
29. EDF, Finite element code_aster, Analysis of structures and thermomechanics for studies and research, 1989–2017. Open source on www.code-aster.org
30. G.B.M. Cervera, G. Lombera, Numerical prediction of temperature and density distributions in selective laser sintering processes. Rapid Prototyp. J. (1999)
31. R.B. Patil, V. Yadava, Finite element analysis of temperature distribution in single metallic powder layer during metal laser sintering. Int. J. Mach. Tools Manuf 47(7–8), 1069–1080 (2007)10.1016/j.ijmachtools.2006.09.025 ↗
32. J.J. Beaman, J.W. Barlow, D.L. Bourell, R.H. Crawford, H.L. Marcus, K.P. McAlea, Solid freeform fabrication: a new direction in manufacturing, vol 2061, pp. 25–49. Kluwer Academic Publishers, Norwell (1997)10.1007/978-1-4615-6327-3 ↗
33. D.A. Nield, A. Bejan et al., Convection in porous media. vol. 3. Springer (2006)
34. H. Yang, Z. Li, S. Wang, The analytical prediction of thermal distribution and defect generation of Inconel 718 by selective laser melting. Appl. Sci. 10(20), 7300 (2020)10.3390/app10207300 ↗
35. J. Weirather, V. Rozov, M. Wille, P. Schuler, C. Seidel, N.A. Adams et al., A smoothed particle hydrodynamics model for laser beam melting of Ni-based alloy 718. Comput. Math. Appl. 78(7), 2377–2394 (2019)10.1016/j.camwa.2018.10.020 ↗
36. Y. Du, X. You, F. Qiao, L. Guo, Z. Liu, A model for predicting the temperature field during selective laser melting. Results Phys. 12, 52–60 (2019)10.1016/j.rinp.2018.11.031 ↗
37. M.A. Bramson, Infrared radiation. A handbook for applications. Opt. Phys. Eng. (1968)10.1007/978-1-4757-0911-7 ↗
38. N.K. Tolochko , Y.V. Khlopkov, S.E. Mozzharov, M.B. Ignatiev, T. Laoui, V.I. Titov, Absorptance of powder materials suitable for laser sintering. Rapid Prototyp. J. (2000)10.1108/13552540010337029 ↗
39. Y. Lee, W. Zhang, Modeling of heat transfer, fluid flow and solidification microstructure of nickel-base superalloy fabricated by laser powder bed fusion. Addit. Manuf. 12, 178–188 (2016)
40. M.J. Ansari, D.S. Nguyen, H.S. Park, Investigation of SLM process in terms of temperature distribution and melting pool size: modeling and experimental approaches. Materials. 12(8) (2019)10.3390/ma12081272 ↗
41. P. Fischer, V. Romano, H.P. Weber, N.P. Karapatis, E. Boillat, R. Glardon, Sintering of commercially pure titanium powder with a Nd:YAG laser source. Acta Mater. 51(6), 1651–1662 (2003)10.1016/S1359-6454(02)00567-0 ↗
42. A. Zinoviev, O. Zinovieva, V. Ploshikhin, V. Romanova, R. Balokhonov, Evolution of grain structure during laser additive manufacturing. Simulation by a cellular automata method. Mater. Design 106, 321–329 (2016)10.1016/j.matdes.2016.05.125 ↗
43. J.A. Goldak, M. Akhlaghi, Computational welding mechanics. Springer Science & Business Media (2006)
44. X. He, T. DebRoy, P. Fuerschbach, Alloying element vaporization during laser spot welding of stainless steel. J. Phys. D Appl. Phys. 36(23), 3079 (2003)10.1088/0022-3727/36/23/033 ↗
45. P. Fischer, V. Romano, H.P. Weber, N. Karapatis, E. Boillat, R. Glardon, Sintering of commercially pure titanium powder with a Nd: YAG laser source. Acta Mater. 51(6), 1651–1662 (2003)10.1016/S1359-6454(02)00567-0 ↗
46. D. Dai, D. Gu, Thermal behavior and densification mechanism during selective laser melting of copper matrix composites: simulation and experiments. Mater. Design 55, 482–491 (2014)10.1016/j.matdes.2013.10.006 ↗
47. Y. Gao, J. Xing, J. Zhang, N. Luo, H. Zheng, Research on measurement method of selective laser sintering (SLS) transient temperature. Optik 119(13), 618–623 (2008)10.1016/j.ijleo.2007.01.010 ↗
48. A. Hussein, L. Hao, C. Yan, R. Everson, Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting. Mater. Design 52, 638–647 (2013)10.1016/j.matdes.2013.05.070 ↗
49. S. Kolossov, E. Boillat, R. Glardon, P. Fischer, M. Locher, 3D FE simulation for temperature evolution in the selective laser sintering process. Int. J. Mach. Tools Manuf. 44(2–3), 117–123 (2004)10.1016/j.ijmachtools.2003.10.019 ↗
50. L. Ma, H. Bin, Temperature and stress analysis and simulation in fractal scanning-based laser sintering. Int. J. Adv. Manuf. Technol. 34(9–10), 898–903 (2007)10.1007/s00170-006-0665-5 ↗
51. J. Yang, H. Yu, H. Yang, F. Li, Z. Wang, X. Zeng, Prediction of microstructure in selective laser melted Ti-6Al-4V alloy by cellular automaton. J. Alloy. Compd. 748, 281–290 (2018)10.1016/j.jallcom.2018.03.116 ↗
52. M. Godec, S. Zaefferer, B. Podgornik, M. Šinko, E. Tchernychova, Quantitative multiscale correlative microstructure analysis of additive manufacturing of stainless steel 316L processed by selective laser melting. Mater. Charact. 160, 110074 (2020)10.1016/j.matchar.2019.110074 ↗
53. B. Podgornik , M. Šinko, M. Godec, Dependence of the wear resistance of additive-manufactured maraging steel on the build direction and heat treatment. Addit. Manuf. 102123 (2021)10.1016/j.addma.2021.102123 ↗
54. R. Trivedi, W. Kurz, Theory of microstructural development during rapid solidification. In: Science and technology of the undercooled melt, pp. 260–267. Springer (1986)10.1007/978-94-009-4456-5_24 ↗
55. G. Marchese, M. Lorusso, S. Parizia, E. Bassini, J.W. Lee, F. Calignano et al., Influence of heat treatments on microstructure evolution and mechanical properties of Inconel 625 processed by laser powder bed fusion. Mater. Sci. Eng. A 729, 64–75 (2018)10.1016/j.msea.2018.05.044 ↗
56. H. Azizi, H. Zurob, B. Bose, S.R. Ghiaasiaan, X. Wang, S. Coulson et al., Additive manufacturing of a novel Ti-Al-V-Fe alloy using selective laser melting. Addit. Manuf. 21, 529–535 (2018)
57. Thermo-Calc Documentation Set, version 2021b. Accessed 21 June 2021
58. M.C. Jo, H. Lee, A. Zargaran, J.H. Ryu, S.S. Sohn, N.J. Kim et al., Exceptional combination of ultra-high strength and excellent ductility by inevitably generated Mn-segregation in austenitic steel. Mater. Sci. Eng. A 737, 69–76 (2018)10.1016/j.msea.2018.09.024 ↗
59. Z. Gan, Y. Lian, S.E. Lin, K.K. Jones, W.K. Liu, G.J. Wagner, Benchmark study of thermal behavior, surface topography, and dendritic microstructure in selective laser melting of Inconel 625. Integr. Mater. Manuf. Innov. 8(2), 178–193 (2019)10.1007/s40192-019-00130-x ↗
60. W.E. King, A.T. Anderson, R.M. Ferencz, N.E. Hodge, C. Kamath, S.A. Khairallah et al., Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges. Appl. Phys. Rev. 2(4), 041304 (2015)10.1063/1.4937809 ↗
61. Lyle BL LE, Ambench2018-description. https://www.nist.gov/ambench/amb2018-02-description/