journal article·2022-08

Effect of curvature of concave model on strengthening effect of 7050-T7451 aluminum alloy by laser shock

Chen Haotian, Ge Liangchen, Liu Xiaoming, Tian Zongjun, Xu Boyuan, Hua Guoran

Applied Physics A· Volume 128· Issue 8
Publisher page

Abstract

In this paper, a simulation modeling was established and analyzed, featuring a different curvature of concave model of 7050-T7451 aluminum alloy using a simulation software ABAQUS. By setting appropriate parameters, the dynamic response and strengthening effect of laser shock processing can be obtained by using ABAQUS software. The magnitude and distribution of residual stress and the generation and deviation of deformation were evaluated. At the same time, the effects of impact pressure, reflection of longitudinal wave, convergence of surface wave, and horizontal components in the concave model were analyzed. According to the simulation and experimental results, when the impact pressure was 1500 MPa, no substantial difference was observed between the magnitude and distribution of residual stress on the surface of each curvature and the plane impact. However, the depth of deformation deviated with the increase in curvature, and the depth of deformation on the generatrix direction of the spot is greater than that on the circumferential direction of the spot. Therefore, when the laser shock strengthening technology was applied to special-shaped and curved surface samples in the actual working condition, the appropriate impact position could be selected according to the characteristics of the concave model to obtain a uniform residual stress distribution and deformation depth, which makes sense.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Treatment and Residual Stress · High-Velocity Impact and Material Behavior · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. C. Wang, K. Luo, X. Bu, Y. Su, J. Cai, Q. Zhang, J. Lu, Laser shock peening-induced surface gradient stress distribution and extension mechanism in corrosion fatigue life of AISI 420 stainless steel. Corros. Sci. 177, 109027 (2020)10.1016/j.corsci.2020.109027 ↗
2. H. Zhang, X. Ren, Y. Tong, E.A. Larson, S. Adu-Gyamfi, J. Wang, X. Li, Surface integrity of 2A70 aluminum alloy processed by laser-induced peening and cavitation bubbles. Results Phys. 12, 1204–1211 (2019)10.1016/j.rinp.2018.11.093 ↗
3. P. Liu, Q.-Y. Shi, Y.-B. Zhang, Microstructural evaluation and corrosion properties of aluminium matrix surface composite adding Al-based amorphous fabricated by friction stir processing. Composites Part B 52, 137–143 (2013)10.1016/j.compositesb.2013.04.019 ↗
4. J. Lan, X. Shen, J. Liu, L. Hua, Strengthening mechanisms of 2A14 aluminum alloy with cold deformation prior to artificial aging. Mater. Sci. Eng. A 745, 517–535 (2019)10.1016/j.msea.2018.12.051 ↗
5. L. Liu, J. Wang, J. Zhou, Effects of laser shock peening on mechanical behaviors and microstructural evolution of brass. Vacuum 147, 178–183 (2018)10.1016/j.vacuum.2017.11.024 ↗
6. M. Pavan, D. Furfari, B. Ahmad, M.A. Gharghouri, M.E. Fitzpatrick, Fatigue crack growth in a laser shock peened residual stress field. Int. J. Fatigue 123, 157–167 (2019)10.1016/j.ijfatigue.2019.01.020 ↗
7. S. Yang, L. Sun, H. Deng, et al. A modified Johnson-Cook model of AA6061-O aluminum alloy with quasi-static pre-strain at high strain rates. Int. J. Mater. Form. 14, 677–689 (2020). https://doi.org/10.1007/s12289-020-01556-x10.1007/s12289-020-01556-x ↗
8. L. Lan, X. Jin, S. Gao, B. He, Y. Rong, Microstructural evolution and stress state related to mechanical properties of electron beam melted Ti-6Al-4V alloy modified by laser shock peening. J. Mater. Sci. Technol. 50, 153–161 (2020)10.1016/j.jmst.2019.11.039 ↗
9. A. Vasu, R.V. Grandhi, Effects of curved geometry on residual stress in laser peening. Surf. Coat. Technol. 218, 71–79 (2013)10.1016/j.surfcoat.2012.12.029 ↗
10. L. Ge, H. Chen, Z. Tian, B. Xu, G. Hua, Y. Cao, Strengthening effect of laser shock: concave model with and without reflection. Surf. Topogr. Metrol. Prop 9, 025016 (2021)10.1088/2051-672X/abf9f6 ↗
11. H. Chen, L. Ge, Z. Tian, X. Liu, B. Xu, G. Hua, Strengthening effect of laser shock: convex model with and without reflection. Surf. Topogr. Metrol. Prop 9, 035026 (2021)10.1088/2051-672X/ac1f7f ↗
12. R. Fabbro, J. Fournier, P. Ballard, D. Devaux, J. Virmont, Physical study of laser-produced plasma in confined geometry. J. Appl. Phys. 68, 775–784 (1990)10.1063/1.346783 ↗
13. P. Ballard, J. Fournier, R. Fabbro, J. Frelat, Residual stresses induced by laser-shocks. J. Phys. IV 1, C3-487-C3-494 (1991)
14. M.W.C. Dharrna-wardana, F. Perrot, Resistivity and dynamic conductivity of laser-pulse heated aluminum up to106 K and along the shock Hugoniot up to 20 Mbars. Phys. Lett. A 163, 223–227 (1992)10.1016/0375-9601(92)90413-G ↗
15. J.N. Johnson, R.W. Rohde, Dynamic deformation twinning in shock loaded iron. J. Appl. Phys. 42, 4171–4182 (1971)10.1063/1.1659750 ↗
16. R. Fabbro, P. Peyre, L. Berthe, X. Scherpereel, Physics and applications of laser-shock processing. J. Laser. Appl. 10, 265–279 (1998)10.2351/1.521861 ↗
17. G.B. Jean-Eric Masse, Laser generation of stress waves in metal. Surf. Coat. Technol. 70, 231–234 (1995)10.1016/0257-8972(95)80020-4 ↗
18. I. Shiganov, D. Melnikov, A. Misyurov, M. Melnikova, D. Shtereveria, Z. Myat, Investigation the effect of laser ablation parameters in a liquid in order to reduce the pulse energy during laser shock peening. Opt. Quantum Electron. 52, 203 (2020)10.1007/s11082-020-02278-9 ↗
19. J. Wu, Z. Xu, H. Qiao, J. Zhao, Z. Huang, Mechanical properties prediction of superalloy FGH4095 treated by laser shock processing based on machine learning. Mater. Lett. 297, 129970 (2021)10.1016/j.matlet.2021.129970 ↗
20. W. Jia, Y. Zan, C. Mao, S. Li, W. Zhou, Q. Li, S. Zhang, V. Ji, Microstructure evolution and mechanical properties of a lamellar near-α titanium alloy treated by laser shock peening. Vacuum 184, 109906 (2021)10.1016/j.vacuum.2020.109906 ↗
21. F.Z. Dai, J.Z. Lu, Y.K. Zhang, D.P. Wen, X.D. Ren, J.Z. Zhou, Effect of laser spot size on the residual stress field of pure Al treated by laser shock processing: simulations. Appl. Surface Sci. 316, 477–483 (2014)10.1016/j.apsusc.2014.07.166 ↗