On elastoplastic behavior of porous enamel–An indentation and numerical study
Source abstract
Abstract
The micro/nano pores in natural mineralized tissues can, to a certain extent, affect their responses to mechanical loading but are generally ignored in existing indentation analysis. In this study, we first examined the void volume fraction of sound and caries lesion enamels through micro-computed tomography (micro-CT). A Berkovich indentation study was then carried out to characterize the effect of porous microstructure on the mechanical behavior of the human enamels. The indentation tests were also modeled using the nonlinear finite element analysis technique to simulate indentation load-displacement curves, which showed reasonable agreement with the experimental measurements. From the simulation results, the extent of densification in the plastic zone was identified and the corresponding stress and contact pressure evolutions were quantified. Further, a conventional elastic-perfectly plastic material model without considering micropores was also developed to investigate the compaction effect of the porous structure. The simulation results reveal that conventional elastic perfect-plastic constitutive models become less reliable to model the mechanical behavior of carious lesion enamel with increasing loss of mineral content as it underestimates the yield stress and plastic energy dissipation. This study divulges the importance of compaction of porous enamel structure beneath the indented area. Note that understanding the effect of porous microstructures on plastic behavior is vital as the involved inelastic deformation mechanism associated with irreversible processes, such as wear and localized microcracking, has a significant bearing on wear and fatigue behavior of enamel. STATEMENT OF SIGNIFICANCE: Based on micro-CT and nano-indentation characterization, a numerical model was developed aiming to precisely describe the deformation behavior of naturally porous enamel. Inelastic properties and energy dissipation characteristics of porous enamel were investigated in detail. This work demonstrated that the existence of micro-pores in White Spot Lesions (WSLs) contributes to mechanical stability, which can mitigate the reduction in Young's modulus and fracture toughness resulting from loss of mineral components. The knowledge gained from this study can be used to explain the mechanisms related to irreversible processes, such as contact induced cracking and wear, and strengthen understanding of the mechanical behavior of porous mineralized tissues.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Bone Tissue Engineering Materials · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Compositional, structural and mechanical comparisons of normal enamel and hypomaturation enamel10.1016/j.actbio.2014.08.023 ↗
2. What constitutes dental caries? Histopathology of carious enamel and dentin related to the action of cariogenic biofilms10.1177/154405910408301s07 ↗
3. A natural biomimetic porous medium mimicking hypomineralized enamel10.1016/j.dental.2014.12.008 ↗
4. Characterisation of developmentally hypomineralised human enamel10.1016/j.jdent.2013.05.002 ↗
5. Deciphering load attenuation mechanisms of the dentin-enamel junction: insights from a viscoelastic constitutive model10.1016/j.actbio.2023.08.050 ↗
6. Influence of water and protein content on the creep behavior in dental enamel10.1016/j.actbio.2023.01.018 ↗
7. Mammalian enamel: a universal tissue and diverse source of inspiration10.1016/j.actbio.2021.09.016 ↗
8. Nano-indentation characterisation of natural carious white spot lesions10.1159/000286214 ↗
9. Correlation of mineral density and elastic modulus of natural enamel white spot lesions using X-ray microtomography and nanoindentation10.1016/j.actbio.2010.06.028 ↗
10. A three-dimensional finite element model of prismatic enamel: a re-appraisal of the data on the Young's modulus of enamel10.1177/00220345970760101101 ↗
11. Property variations in the prism and the organic sheath within enamel by nanoindentation10.1016/j.biomaterials.2004.07.059 ↗
12. Understanding the mechanical behaviour of human enamel from its structural and compositional characteristics10.1016/j.jmbbm.2007.05.001 ↗
13. Time-resolved in situ synchrotron-microCT: 4D deformation of bone and bone analogues using digital volume correlation10.1016/j.actbio.2021.06.014 ↗
14. Porous structure and compressive failure mechanism of additively manufactured cubic-lattice tantalum scaffolds
15. Energy absorption characterization of human enamel using nanoindentation10.1002/jbm.a.31051 ↗
16. Hardness and yield strength of dentin from simulated nano-indentation tests10.1016/j.cmpb.2004.11.003 ↗
17. Discrete element models of tooth enamel, a complex three-dimensional biological composite10.1016/j.actbio.2019.04.058 ↗
18. Unravelling the structural variation of lizard osteoderms10.1016/j.actbio.2022.05.004 ↗
19. Mechanical property determination of bone through nano-and micro-indentation testing and finite element simulation10.1016/j.jbiomech.2007.09.019 ↗
20. Mechanical properties of stingray tesserae: high-resolution correlative analysis of mineral density and indentation moduli in tessellated cartilage10.1016/j.actbio.2019.06.038 ↗
21. A macroscopic viscoelastic viscoplastic constitutive model for porous polymers under multiaxial loading conditions10.1016/j.jmps.2023.105499 ↗
22. Mechanical properties of hierarchical porous silica thin films: experimental characterization by nanoindentation and Finite Element modeling10.1016/j.micromeso.2010.09.004 ↗
23. Spherical indentation of porous ceramics: elasticity and hardness10.1016/j.jeurceramsoc.2015.12.049 ↗
24. Spherical indentation of porous ceramics: cracking and toughness10.1016/j.jeurceramsoc.2016.05.010 ↗
25. Spherical indentation of bilayer ceramic structures: dense layer on porous substrate10.1016/j.jeurceramsoc.2017.05.053 ↗
26. Characterisation of enamel white spot lesions using X-ray micro-tomography10.1016/j.jdent.2007.06.001 ↗
27. Quantitative characterization and micro-CT mineral mapping of natural fissural enamel lesions10.1016/j.jdent.2016.01.012 ↗
28. Evaluation and extension of physical property-porosity models based on minimum solid area10.1007/BF00355133 ↗
29. Structure, crystal chemistry and density of enamel apatites
30. Correlating the mechanical properties to the mineral content of carious dentine—a comparative study using an ultra-micro indentation system (UMIS) and SEM-BSE signals10.1016/j.archoralbio.2003.12.005 ↗
31. A new framework for characterization of poroelastic materials using indentation10.1016/j.actbio.2019.11.010 ↗
32. Combined mean-field and full-field homogenization of porous elasto-plastic materials and composites under arbitrary stress triaxialities10.1016/j.mechmat.2023.104818 ↗
33. Mechanical characterization of highly porous inorganic solids materials by instrumented micro-indentation10.1016/j.actamat.2013.07.005 ↗
34. Magnesium incorporation into primary dental enamel and its effect on mechanical properties10.1016/j.actbio.2020.08.035 ↗
35. Mesoscale porosity at the dentin-enamel junction could affect the biomechanical properties of teeth10.1016/j.actbio.2017.01.052 ↗
36. The peritubular reinforcement effect of porous dentine microstructure10.1371/journal.pone.0183982 ↗
37. Detection of artificial enamel caries-like lesions with a blue hydroxyapatite-binding porosity probe10.1016/j.jdent.2023.104601 ↗
38. Morphological and porosity changes in primary enamel surface after an in vitro demineralization model10.1002/jemt.24058 ↗
39. Synchrotron x-ray microtomographic investigation of mineral concentrations at micrometre scale in sound and carious enamel10.1159/000080580 ↗
40. X-ray microtomographic study of mineral concentration distribution in deciduous enamel10.1016/j.archoralbio.2004.05.011 ↗
41. Longitudinal study of the three-dimensional development of subsurface enamel lesions during in vitro demineralisation10.1159/000070865 ↗
42. Novel technique for measuring the mechanical properties of porous materials by nanoindentation10.1557/jmr.2006.0088 ↗
43. Modelling of microcracks initiation and evolution along interfaces of the WC/Co composite by the finite element method10.1016/j.commatsci.2013.11.045 ↗
44. Sorptivity of water in enamel for categorizing caries lesions10.1016/j.dental.2020.08.003 ↗
45. Investigation on the microtribological behaviour of human tooth enamel by nanoscratch10.1016/j.wear.2010.11.020 ↗
46. Enamel: from brittle to ductile like tribological response10.1016/j.jdent.2008.05.011 ↗
47. Enamel—A “metallic-like” deformable biocomposite10.1016/j.jdent.2006.12.002 ↗
48. In situ synchrotron radiation µCT indentation of cortical bone: anisotropic crack propagation, local deformation, and fracture
49. Microstructural controls on the plastic consolidation of porous brittle solids10.1016/j.actamat.2023.118861 ↗
50. Nature's design solutions in dental enamel: uniting high strength and extreme damage resistance10.1016/j.actbio.2020.02.019 ↗
51. Crystal misorientation correlates with hardness in tooth enamels10.1016/j.actbio.2020.07.037 ↗
52. General relationship between strength and hardness10.1016/j.msea.2011.08.061 ↗
53. Mechanical behaviour of porous hydroxyapatite10.1016/j.actbio.2007.11.002 ↗
54. Nanoscale heterogeneity promotes energy dissipation in bone10.1038/nmat1911 ↗
55. The role of property gradients on the mechanical behavior of human enamel10.1016/j.jmbbm.2012.01.009 ↗
56. Threshold damage mechanisms in brittle solids and their impact on advanced technologies10.1016/j.actamat.2022.117921 ↗
57. Multi-scale characterization of Developmental Defects of Enamel and their clinical significance for diagnosis and treatment10.1016/j.actbio.2023.08.011 ↗
58. The geometrical structure of interfaces in dental enamel: a FIB-STEM investigation10.1016/j.actbio.2019.12.040 ↗