journal article·2004-09

Fabrication of diamond-like carbon thin films by femtosecond laser ablation of frozen acetone

W. Inoue, M. Okoshi, N. Inoue

Applied Physics A· Volume 79· Issue 4-6
Publisher page

Abstract

Diamond-like carbon (DLC) thin films were fabricated by the ablation of frozen acetone with a 790 nm, 130 fs Ti:sapphire laser. Compared to a solid carbon target, frozen acetone could significantly reduce the number of fragments mixed into the films. The optical and mechanical properties of the fabricated DLC films were determined when the laser fluence was varied from 3 to 470 J/cm2. With the increase in laser fluence, the films tinged with brown and the optical bandgap of the films decreased from 2.0 to 1.2 eV. Also, the refractive index and hardness of the films increased from 1.75 to 1.99 and from 10 to 16 GPa, respectively. The sp3 content was not changed even if the laser fluence was varied. The change in properties resulted from the hydrogen content of the films.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · High-pressure geophysics and materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. S.R.P. Silva: Properties of Amorphous Carbon (IEE, London 2003)
2. H.-C. Tsai, D.B. Bogy: J. Vac. Sci. Technol. A 5, 3287 (1987)10.1116/1.574188 ↗
3. T. Sato, S. Furuno, S. Iguchi, M. Hanabusa: Appl. Phys. A 45, 355 (1988)10.1007/BF00617942 ↗
4. M. Tabbal, P. Mérel, M. Chaker, M.A. El Khakani, E.G. Herbert, B.N. Lucas, M.E. O’Hern: J. Appl. Phys. 85, 3860 (1999)10.1063/1.369757 ↗
5. M. Bonelii, A. Miotello, P. Mosaner, C. Casiraghi, P.M. Ossi: J. Appl. Phys. 93, 859 (2003)10.1063/1.1530725 ↗
6. F. Davanloo, E.M. Juengerman, D.R. Jander, T.J. Lee, C.B. Collins: J. Appl. Phys. 67, 2081 (1990)10.1063/1.345566 ↗
7. Y.V. Charyshkin, N.Z. Sakipov: J. Appl. Phys. 72, 2508 (1992)10.1063/1.351544 ↗
8. Z.F. Li, Z.Y. Yang, R.F. Xiao: J. Appl. Phys. 80, 5398 (1996)10.1063/1.362726 ↗
9. A.A. Lyalin, A.V. Simakin, G.A. Shafeev, E.N. Loubnin: Appl. Phys. A 68, 373 (1999)10.1007/s003390050907 ↗
10. F.-X. Rong: Appl. Phys. Lett. 67, 1022 (1995)10.1063/1.114717 ↗
11. M. Hanabusa, K. Tujihara: J. Appl. Phys. 78, 4267 (1995)10.1063/1.359891 ↗
12. F. Qian, R.K. Singh, S.K. Dutta, P.P. Pronko: Appl. Phys. Lett. 67, 3120 (1995)10.1063/1.114853 ↗
13. S. Sato, T. Yoneyama, T. Hiraguchi: Jpn. J. Appl. Phys. 36, L 1328 (1997)10.1143/JJAP.36.L1328 ↗
14. M. Okoshi, S. Higuchi, M. Hanabusa: J. Appl. Phys. 86, 1768 (1999)10.1063/1.370962 ↗
15. M. Okoshi, S. Higuchi, M. Hanabusa: Appl. Surf. Sci. 154–155, 376 (2000)10.1016/S0169-4332(99)00378-5 ↗
16. Z. Tang, Z.J. Zhang, K. Narumi, Y. Xu, H. Naramoto, S. Nagai, K. Miyashita: J. Appl. Phys. 89, 1959 (2001)10.1063/1.1333739 ↗
17. A.C. Ferrari, J. Robertoson: Phys. Rev. B 61, 14095 (2000)10.1103/PhysRevB.61.14095 ↗
18. S.A. Alterovitz, N. Savvides, F.W. Smith, J.A. Woollam: Handbook of Optical Constants of Solids II, ed. by E.D. Palik (Academic Press, San Diego 1991) p. 837