journal article·2009-01

Atomic force microscopy studies of chemical–mechanical processes on silicon(100) surfaces

R. Imoto, F. Stevens, S. C. Langford, J. T. Dickinson

Applied Physics A· Volume 94· Issue 1
Publisher page

Abstract

Atomic force microscopy (AFM) is used to examine chemical–mechanical processes on Si(100) surfaces. The AFM tip serves as a single asperity contact to exert tribological forces as well as an imaging tool. By scanning in chemically aggressive solutions, material removal can be observed directly. In the silicon system, high-force scans are used to remove oxide and initiate etching in selected locations, followed by low-force scans to image the resulting surfaces. Material removal rates were measured as a function of applied load, number of scans, solution composition, and time. In basic solution, places where the underlying silicon is exposed etch rapidly, producing structures 100 nm or less in size. Although the surface roughness initially increases during etching, the final surfaces are smooth. The oxide is extremely sensitive to applied stress: even very light scanning accelerates oxide dissolution. Once the oxide is removed, chemical etching proceeds through the underlying silicon with or without AFM scanning; but the silicon etches more rapidly if AFM scanning is continued, due to true chemical–mechanical (tribochemical) effects.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Force Microscopy Techniques and Applications · Advanced Surface Polishing Techniques · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. W. Maw, F. Stevens, S.C. Langford, J.T. Dickinson, J. Appl. Phys. 92, 5103 (2002)10.1063/1.1510595 ↗
2. F. Stevens, S.C. Langford, J.T. Dickinson, J. Appl. Phys. 99, 023529 (2006)10.1063/1.2166646 ↗
3. F. Katsuki, A. Saguchi, W. Takahashi, J. Watanabe, Jpn. J. Appl. Phys. Part 1 41, 4919 (2002)10.1143/JJAP.41.4919 ↗
4. W.C. Moon, T. Yoshinobu, H. Iwasaki, Ultramicroscopy 86, 49 (2001)10.1016/S0304-3991(00)00089-9 ↗
5. E.D. Palik, V.M. Bermudez, O.J. Glembocki, J. Electrochem. Soc. 132, 871 (1985)10.1149/1.2113976 ↗
6. H. Seidel, L. Csepregi, A. Heuberger, H. Baumgärtel, J. Electrochem. Soc. 137, 3612 (1990)10.1149/1.2086277 ↗
7. E.D. Palik, H.G. Gray, P.B. Klein, J. Electrochem. Soc. 130, 956 (1983)10.1149/1.2119866 ↗
8. M. Morita, T. Ohmi, E. Hasegawa, M. Kawakami, M. Ohwada, J. Appl. Phys. 68, 1272 (1990)10.1063/1.347181 ↗
9. K. Sakaino, Y. Kawabata, S. Adachi, J. Electrochem. Soc. 147, 1530 (2000)10.1149/1.1393389 ↗
10. K. Sakaino, S. Adachi, Sens. Actuators A 88, 71 (2001)10.1016/S0924-4247(00)00501-X ↗
11. E.D. Palik, O.J. Glembocki, I.J. Heard, P.S. Burno, L. Tenerz, J. Appl. Phys. 70, 3291 (1991)10.1063/1.349263 ↗