journal article·2002-12-01

Time-of-flight neutron-diffraction investigations of elastic and anisotropy strains in fatigued austenitic stainless steel

Y.V. Taran, M.R. Daymond, J. Schreiber

Publisher page

Abstract

A study of the elastic and plastic properties of the austenitic base matrix and martensitic precipitates induced in stainless steel during high cycling tensile–compressive loading was made in the in situ stress-rig experiment on the ENGIN instrument at the ISIS facility. It is observed that the elastic constants of the austenitic and martensitic phases for the axial and transverse directions determined by the Rietveld refinement are almost independent of the level of fatigue, while the bulk value of the Young modulus measured by a gauge extensometer decreases with increasing fatigue. The austenitic elastic response is linear throughout the measured stress range (0–500 MPa), while the martensitic response is linear only up to 300–320 MPa, almost the same stress level at which bulk plasticity is observed. Herewith, the ratio of the martensitic elastic constants in the axial and transverse directions is almost twice that expected based purely on the value of the Poisson ratio. Results of the modified Rietveld refinement accounting for the elastic anisotropy in polycrystalline materials under load are presented.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Nuclear Physics and Applications · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.