journal article·2024-02

Fully integrated wearable microneedle biosensing platform for wide-range and real-time continuous glucose monitoring

Lei Li, Yujie Zhou, Chenwei Sun, Zhengming Zhou, Jieyu Zhang, Yuanyuan Xu, Xuanyu Xiao, Hui Deng, Yuting Zhong, Guoyuan Li, Zhiyu Chen, Wei Deng, Xuefeng Hu, Yunbing Wang

Acta Biomaterialia· Volume 175
Publisher page

Abstract

Wearable microneedle sensors for continuous glucose monitoring (CGM) have great potential for clinical impact by allowing access to large data sets to provide individualized treatment plans. To date, their development has been challenged by the accurate wide linear range tracking of interstitial fluid (ISF) glucose (Glu) levels. Here, we present a CGM platform consisting of a three-electrode microneedle electrochemical biosensor and a fully integrated radio-chemical analysis system. The long-term performance of the robust CGM on diabetic rats was achieved by electrodepositing Prussian blue (PB), and crosslinking glucose oxidase (GOx) and chitosan to form a 3D network using glutaraldehyde (GA). After redox by GOx, PB rapidly decomposes hydrogen peroxide and mediates charge transfer, while the 3D network and graphite powder provide enrichment and release sites for Glu and catalytic products, enabling a sensing range of 0.25-35 mM. Microneedle CGM has high sensitivity, good stability, and anti-interference ability. In diabetic rats, CGM can accurately monitor Glu levels in the ISF in real-time, which are highly consistent with levels measured by commercial Glu meters. These results indicate the feasibility and application prospects of the PB-based CGM for the clinical management of diabetes. STATEMENT OF SIGNIFICANCE: This study addresses the challenge of continuous glucose monitoring system design where the narrow linear range of sensing due to the miniaturization of sensors fails to meet the monitoring needs of clinical diabetic patients. This was achieved by utilizing a three-dimensional network of glutaraldehyde cross-linked glucose oxidase and chitosan. The unique topology of the 3D network provides a large number of sites for glucose enrichment and anchors the enzyme to the sensing medium and the conductive substrate through covalent bonding, successfully blocking the escape of the enzyme and the sensing medium and shortening the electron transfer and transmission path.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrochemical sensors and biosensors · Advanced Sensor and Energy Harvesting Materials · Analytical Chemistry and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (85)

Show source-provided references
1. Wearable biosensors for healthcare monitoring10.1038/s41587-019-0045-y ↗
2. Highly flexible, wearable, and disposable cardiac biosensors for remote and ambulatory monitoring10.1038/s41746-017-0009-x ↗
3. Monitoring of the central blood pressure waveform via a conformal ultrasonic device10.1038/s41551-018-0287-x ↗
4. Simultaneous monitoring of sweat lactate content and sweat secretion rate by wearable remote biosensors10.1016/j.bios.2022.113970 ↗
5. Glucose-responsive insulin patch for the regulation of blood glucose in mice and minipigs10.1038/s41551-019-0508-y ↗
6. Electrochemical glucose sensors in diabetes management: an updated review (2010-2020)10.1039/D0CS00304B ↗
7. Multifunctional materials for implantable and wearable photonic healthcare devices10.1038/s41578-019-0167-3 ↗
9. Wireless smart contact lens for diabetic diagnosis and therapy10.1126/sciadv.aba3252 ↗
10. Enzyme-based biosensors for in vivo measurements10.1021/cr990003y ↗
11. Biocompatible materials for continuous glucose monitoring devices10.1021/cr300387j ↗
12. An integrated wearable microneedle array for the continuous monitoring of multiple biomarkers in interstitial fluid10.1038/s41551-022-00887-1 ↗
13. Bimetallic nanocatalysts immobilized in nanoporous hydrogels for long-term robust continuous glucose monitoring of smart contact lens
14. Accessing analytes in biofluids for peripheral biochemical monitoring10.1038/s41587-019-0040-3 ↗
15. Reduced graphene oxide nanohybrid-assembled microneedles as mini-invasive electrodes for real-time transdermal biosensing10.1002/smll.201804298 ↗
16. A fully integrated closed-loop system based on mesoporous microneedles-iontophoresis for diabetes treatment
17. Transdermal electrochemical monitoring of glucose via high-density silicon microneedle array patch
18. A gold nanoparticles deposited polymer microneedle enzymatic biosensor for glucose sensing10.1016/j.electacta.2020.136917 ↗
19. Microneedle based electrochemical (bio)sensing: towards decentralized and continuous health status monitoring, TrAC-Trend
20. Wearable hollow microneedle sensing patches for the transdermal electrochemical monitoring of glucose10.1016/j.talanta.2022.123695 ↗
21. Electrochemical glucose sensors in diabetes management: an updated review (2010–2020)10.1039/D0CS00304B ↗
22. Improvement of the biocompatibility and potential stability of chronically implanted electrodes incorporating coating cell membranes10.1021/acsami.8b20542 ↗
23. Integration of microfluidic injection analysis with carbon nanomaterials/gold nanowire arrays-based biosensors for glucose detection10.1007/s11434-016-1013-2 ↗
24. A conductive hydrogel microneedle-based assay integrating PEDOT:PSS and Ag-Pt nanoparticles for real-time, enzyme-less, and electrochemical sensing of glucose
25. Reusable electrochemical non-enzymatic glucose sensors based on Au-inlaid nanocages10.1007/s12274-022-4219-4 ↗
26. Wearable biosensors for body computing10.1002/adfm.202170290 ↗
27. The marriage of biochemistry and nanotechnology for non-invasive real-time health monitoring10.1016/j.mser.2022.100681 ↗
28. Preparation and evaluation of chitosan biocompatible electronic skin10.1016/j.compind.2018.03.040 ↗
29. AuNPs/CNOs/SWCNTs/chitosan-nanocomposite modified electrochemical sensor for the label-free detection of carcinoembryonic antigen10.1016/j.bios.2018.02.037 ↗
30. A recyclable chitosan-based QCM biosensor for sensitive and selective detection of breast cancer cells in real time10.1039/C4AN01532K ↗
31. A versatile strategy to construct free-standing multi-furcated vessels and a complicated vascular network in heterogeneous porous scaffolds via combination of 3D printing and stimuli-responsive hydrogels10.1039/D2MH00314G ↗
32. Fully integrated wearable sensor arrays for multiplexed in situ perspiration analysis10.1038/nature16521 ↗
33. A hybridized nano-porous carbon reinforced 3D graphene-based epidermal patch for precise sweat glucose and lactate analysis10.1016/j.bios.2022.114846 ↗
34. 3D-printed microneedle-based potentiometric sensor for pH monitoring in skin interstitial fluid10.1016/j.snb.2022.133159 ↗
35. Skin-attachable, stretchable electrochemical sweat sensor for glucose and pH detection10.1021/acsami.8b03342 ↗
36. The development of NAD+-dependent dehydrogenase screen-printed biosensor based on enzyme and nanoporous gold co-catalytic strategy10.1016/j.bios.2022.114376 ↗
37. Multiphoton lithography of organic semiconductor devices for 3D printing of flexible electronic circuits, biosensors, and bioelectronics
38. Fully integrated flexible biosensor for wearable continuous glucose monitoring10.1016/j.bios.2021.113760 ↗
39. Flexible and self-healing electrochemical hydrogel sensor with high efficiency toward glucose monitoring10.1016/j.bios.2020.112105 ↗
40. Thermal self-regulatory intelligent biosensor based on carbon-nanotubes-decorated phase-change microcapsules for enhancement of glucose detection10.1016/j.bios.2021.113586 ↗
41. Microneedle-based detection of ketone bodies along with glucose and lactate: toward real-time continuous interstitial fluid monitoring of diabetic ketosis and ketoacidosis10.1021/acs.analchem.9b05109 ↗
42. A touch-actuated glucose sensor fully integrated with microneedle array and reverse iontophoresis for diabetes monitoring10.1016/j.bios.2022.114026 ↗
43. Cornus officinalis prior and post-processing: regulatory effects on intestinal flora of diabetic nephropathy rats10.3389/fphar.2022.1039711 ↗
44. Ionic liquid-assisted Prussian blue for stable sodium-ion battery cathodes10.1021/acsaem.2c01357 ↗
45. Oxidative print light synthesis thin film deposition of Prussian blue10.1021/acsaelm.9b00854 ↗
46. Raman spectroscopy of the photosensitive pigment Prussian blue10.1002/jrs.5366 ↗
47. Characterization and utilization of Prussian blue and its pigments10.1039/C6DT03351B ↗
48. Electrocrystallization orientation regulation of zinc metal anodes: strategies and challenges10.1016/j.ensm.2022.07.046 ↗
49. High-temperature proton conduction in covalent organic frameworks interconnected with nanochannels for reverse electrodialysis10.1021/acsami.1c06285 ↗
50. The influence of crystallite size on the structural stability of cu/sapo-34 catalysts10.1016/j.apcatb.2019.02.054 ↗
51. Enabling solution processable COFs through suppression of precipitation during solvothermal synthesis10.1021/acsnano.2c08580 ↗
52. Tuning the crystallinity and coverage of SiO2–ZnIn2S4 core-shell nanoparticles for efficient hydrogen generation10.1021/acsami.0c20716 ↗
53. DFT-assisted design inspired by loofah-derived biomass carbon decorated CoFe-CoFe2O4 conjugated molecular imprinting strategy for hazardous thiamphenicol analysis in spiked food10.1016/j.snb.2022.132852 ↗
54. Estimation of microwave penetration distance and complex permittivity of graphite by measurement of permittivity and direct current conductivity of graphite powder mixtures10.1063/1.4913385 ↗
55. Surface modification enhances the bulk proton conductivity of Prussian blue10.1039/D3CC00629H ↗
56. Prussian blue (pb)/carbon nanopolyhedra/polypyrrole composite as electrode: a high performance sensor to detect hydrazine with long linear range10.1016/j.snb.2017.05.042 ↗
57. A novel Prussian blue/PANI nanostructure-based biosensor for ultrasensitive determination of trace hydroquinone10.1016/j.snb.2023.134137 ↗
58. Apta-sensor for selective determination of dopamine using chitosan-stabilized Prussian blue nanoparticles10.1039/D3TB00799E ↗
59. Covalently bridge metals to biomass carbon for sensing da and fa with high specificity and sensitivity
60. Architecting hierarchal Zn3V2O8/p-rGO nanostructure: electrochemical determination of anti-viral drug azithromycin in biological samples using SPCE10.1016/j.cej.2022.135591 ↗
61. Multifunctional Prussian blue from nano-structure designed to wearable sensors application, TrAC-Trend
62. Disposable Prussian blue-anchored electrochemical sensor for enzymatic and non-enzymatic multi-analyte detection
63. Synthesis of novel monomeric graphene quantum dots and corresponding nanocomposite with molecularly imprinted polymer for electrochemical detection of an anticancerous ifosfamide drug10.1016/j.bios.2017.02.028 ↗
64. Processable enzyme-hybrid conductive polymer composites for electrochemical biosensing10.1016/j.bios.2017.09.021 ↗
65. Learning from nature: constructing a smart bionic structure for high-performance glucose sensing in human serums10.1002/adfm.202106958 ↗
66. Glucose-sensitive hydrogel optical fibers functionalized with phenylboronic acid10.1002/adma.201606380 ↗
67. Preparation of reduced graphene oxide-Ni(OH)2 composites by electrophoretic deposition: application for non-enzymatic glucose sensing10.1039/C4TA00123K ↗
68. 4-aminothiophenol-intercalated montmorillonite: organic-inorganic hybrid material as an immobilization support for biosensors10.1016/j.snb.2020.127665 ↗
69. Sensitivity enhanced SeNPs-FTO electrochemical sensor for hydrogen peroxide detection10.1016/j.jelechem.2020.114544 ↗
70. E.C.F.Standardization, In vitro diagnostic test systems-requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus, 2015.
71. Highly enhanced triboelectric performance from increased dielectric constant induced by ionic and interfacial polarization for chitosan based multi-modal sensing system
72. Enhancing self-management in type 1 diabetes with wearables and deep learning10.1038/s41746-022-00626-5 ↗
73. Landscape of continuous glucose monitoring (CGM) and integrated CGM: accuracy considerations10.1089/dia.2021.0236 ↗
74. Hydrogel bioelectronics10.1039/C8CS00595H ↗
75. Hemoglobin a1c accurately predicts continuous glucose monitoring-derived average glucose in youth and young adults with cystic fibrosis10.2337/dc17-2419 ↗
76. A prospective multicenter evaluation of the accuracy of a novel implanted continuous glucose sensor: precise II10.1089/dia.2017.0142 ↗
77. Surface enhanced Raman spectroscopy based biosensor with a microneedle array for minimally invasive in vivo glucose measurements10.1021/acssensors.0c00444 ↗
78. A glucose biosensor based on surface-enhanced Raman scattering: improved partition layer, temporal stability, reversibility, and resistance to serum protein interference10.1021/ac035134k ↗
79. A pilot study in humans of microneedle sensor arrays for continuous glucose monitoring10.1039/C8AY00264A ↗
80. A highly permselective electrochemical glucose sensor using red blood cell membrane10.1016/j.bios.2017.12.002 ↗
81. Glucose response of near-infrared alginate-based microsphere sensors under dynamic reversible conditions10.1089/dia.2011.0057 ↗
82. Materials and techniques for implantable nutrient sensing using flexible sensors integrated with metal-organic frameworks
83. Long-term implantable glucose biosensors10.1016/j.coelec.2018.05.004 ↗
84. Reduction of measurement noise in a continuous glucose monitor by coating the sensor with a zwitterionic polymer10.1038/s41551-018-0273-3 ↗
85. Macrophages and the recovery from acute and chronic inflammation10.1146/annurev-physiol-022516-034348 ↗