journal article·2021-03-10Open access

A Review of Power Management Integrated Circuits for Ultrasound-Based Energy Harvesting in Implantable Medical Devices

Andrea Ballo, Michele Bottaro, Alfio Dario Grasso

Applied Sciences· Volume 11· Issue 6

Abstract

This paper aims to review the recent architectures of power management units for ultrasound-based energy harvesting, while focusing on battery-less implantable medical devices. In such systems, energy sustainability is based on piezoelectric devices and a power management circuit, which represents a key building block since it maximizes the power extracted from the piezoelectric devices and delivers it to the other building blocks of the implanted device. Since the power budget is strongly constrained by the dimension of the piezoelectric energy harvester, complexity of topologies have been increased bit by bit in order to achieve improved power efficiency also in difficult operative conditions. With this in mind, the introduced work consists of a comprehensive presentation of the main blocks of a generic power management unit for ultrasound-based energy harvesting and its operative principles, a review of the prior art and a comparative study of the performance achieved by the considered solutions. Finally, design guidelines are provided, allowing the designer to choose the best topology according to the given design specifications and technology adopted.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Innovative Energy Harvesting Technologies · Energy Harvesting in Wireless Networks · Wireless Power Transfer Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Electrical, Electronic and Computer Engineering, University of Catania, Viale A. Doria, 6, 95125 Catania, Italy

Funding

Brain28nm Project

References (51)

Show source-provided references
1. History of implantable devices10.1109/51.84185 ↗
2. Katic, J. (2017). Highly-Efficient Energy Harvesting Interfaces for Implantable Biosensors. [Doctoral Dissertation, KTH Royal Institute of Technology].
3. Power Approaches for Implantable Medical Devices10.3390/s151128889 ↗
4. Nandish, M.B., and Hosamani, B. (2014). A Review of Energy Harvesting From Vibration using Piezoelectric Material. Int. J. Eng. Res. Technol., 1607.
5. A Review on Miniaturized Ultrasonic Wireless Power Transfer to Implantable Medical Devices10.1109/ACCESS.2018.2886780 ↗
6. Ballo, A., Grasso, A.D., and Palumbo, G. (2019). A Review of Charge Pump Topologies for the Power Management of IoT Nodes. Electronics, 8.10.3390/electronics8050480 ↗
7. A review of acoustic power transfer for bio-medical implants10.1088/0964-1726/25/12/123001 ↗
8. Ballo, A., Bottaro, M., Grasso, A.D., and Palumbo, G. (2020). Regulated Charge Pumps: A Comparative Study by Means of Verilog-AMS. Electronics, 9.10.3390/electronics9060998 ↗
9. Denisov, A., and Yeatman, E. (2010, January 7–9). Ultrasonic vs. Inductive Power Delivery for Miniature Biomedical Implants. Proceedings of the 2010 International Conference on Body Sensor Networks, Singapore.10.1109/BSN.2010.27 ↗
10. Zhou, Y., Liu, C., and Huang, Y. (2020). Wireless Power Transfer for Implanted Medical Application: A Review. Energies, 13.10.3390/en13112837 ↗
11. Emerging Implantable Energy Harvesters and Self-Powered Implantable Medical Electronics10.1021/acsnano.9b08268 ↗
12. Self-Powered Implantable Medical Devices: Photovoltaic Energy Harvesting Review10.1002/adhm.202000779 ↗
13. Kumar, P.M., Jagadeesh Babu, V., Subramanian, A., Bandla, A., Thakor, N., Ramakrishna, S., and Wei, H. (2019). The Design of a Thermoelectric Generator and Its Medical Applications. Designs, 3.10.3390/designs3020022 ↗
14. Energy Harvesting From the Human Body for Biomedical Applications10.1109/MPOT.2016.2549998 ↗
15. A Subthreshold Cross-Coupled Hybrid Charge Pump for 50-mV Cold-Start10.1109/ACCESS.2020.3032452 ↗
16. Yang, Y., Dong Xu, G., and Liu, J. (2013). A Prototype of an Implantable Thermoelectric Generator for Permanent Power Supply to Body Inside a Medical Device. J. Med. Devices, 8.10.1115/1.4025619 ↗
17. Design and Optimization of Ultrasonic Wireless Power Transmission Links for Millimeter-Sized Biomedical Implants10.1109/TBCAS.2016.2583783 ↗
18. Biointegrated and Wirelessly Powered Implantable Brain Devices: A Review10.1109/TBCAS.2020.2966920 ↗
19. Miniaturised Wireless Power Transfer Systems for Neurostimulation: A Review10.1109/TBCAS.2020.3038599 ↗
20. A Comprehensive Comparative Study on Inductive and Ultrasonic Wireless Power Transmission to Biomedical Implants10.1109/JSEN.2018.2812420 ↗
21. Wireless Power Transfer Strategies for Implantable Bioelectronics10.1109/RBME.2017.2683520 ↗
22. Sound Technologies, Sound Bodies: Medical Implants with Ultrasonic Links10.1109/MMM.2016.2608638 ↗
23. A 0.065-mm3 Monolithically-Integrated Ultrasonic Wireless Sensing Mote for Real-Time Physiological Temperature Monitoring10.1109/TBCAS.2020.2971066 ↗
24. Development and Application of Piezoelectric Materials for Ultrasound Generation and Detection10.1258/ult.2011.011027 ↗
25. Seeman, M.D., Ng, V.W., Le, H., John, M., Alon, E., and Sanders, S.R. (2010, January 28–30). A comparative analysis of Switched-Capacitor and inductor-based DC-DC conversion technologies. Proceedings of the 2010 IEEE 12th Workshop on Control and Modeling for Power Electronics (COMPEL), Boulder, CO, USA.10.1109/COMPEL.2010.5562407 ↗
26. Ballo, A., Grasso, A.D., and Palumbo, G. (2020). Charge Pump Improvement for Energy Harvesting Applications by Node Pre-Charging. IEEE Trans. Circuits Syst. II Express Briefs.10.1109/TCSII.2020.2991241 ↗
27. A simple and effective design strategy to increase power conversion efficiency of linear charge pumps10.1002/cta.2704 ↗
28. Current-mode body-biased switch to increase performance of linear charge pumps10.1002/cta.2851 ↗
29. Lu, Y., and Ki, W.H. (2018). CMOS Integrated Circuit Design for Wireless Power Transfer, Springer. Analog Circuits and Signal Processing.10.1007/978-981-10-2615-7 ↗
30. Shigeta, Y., Yamamoto, T., Fujimori, K., Sanagi, M., Nogi, S., and Tsukagoshi, T. (2009, January 28–29). Development of ultrasonic wireless power transmission system for implantable electronic devices. Proceedings of the 2009 European Wireless Technology Conference, Rome, Italy.
31. Ye, J., and Tanzawa, T. (2020). An Optimum Design of Clocked AC-DC Charge Pump Circuits for Vibration Energy Harvesting. Electronics, 9.10.3390/electronics9122031 ↗
32. Optimized Charge Pump With Clock Booster for Reduced Rise Time or Silicon Area
33. Linear distribution of capacitance in Dickson charge pumps to reduce rise time10.1002/cta.2761 ↗
34. An Ultrasonically Powered Implantable Micro-Oxygen Generator (IMOG)10.1109/TBME.2011.2163634 ↗
35. Huang, C., Kawajiri, T., and Ishikuro, H. (2016). A Near-Optimum 13.56 MHz CMOS Active Rectifier With Circuit-Delay Real-Time Calibrations for High-Current Biomedical Implants. IEEE J. Solid-State Circuits.10.1109/CICC.2015.7338391 ↗
36. A Dual-Mode Nested Rectifier for Ambient Wireless Powering in CMOS Technology10.1109/TMTT.2020.2970913 ↗
37. An Efficiency-Enhanced CMOS Rectifier With Unbalanced-Biased Comparators for Transcutaneous-Powered High-Current Implants10.1109/JSSC.2009.2020195 ↗
38. Chang, R.C., Chen, W., and Hsiao, W. (2017, January 10–12). A high-performance AC-DC rectifier with fully actively controlled switches for vibration energy harvesting. Proceedings of the 2017 IEEE Wireless Power Transfer Conference (WPTC), Taipei, Taiwan.10.1109/WPT.2017.7953888 ↗
39. An AC–DC Rectifier With Active and Non-Overlapping Control for Piezoelectric Vibration Energy Harvesting
40. A High-Efficiency Low-Power Rectifier for Wireless Power Transfer Systems of Deep Micro-Implants10.1109/ACCESS.2020.3036703 ↗
41. Ghanad, M.A., and Dehollain, C. (2012, January 9–12). A passive CMOS rectifier with leakage current control for medical implants. Proceedings of the 2012 19th IEEE International Conference on Electronics, Circuits, and Systems (ICECS 2012), Seville, Spain.10.1109/ICECS.2012.6463694 ↗
42. Ultrasonically Powered Compact Implantable Dust for Optogenetics10.1109/TBCAS.2020.2984921 ↗
43. Lee, E.K.F. (2015, January 28–30). A voltage doubling passive rectifier/regulator circuit for biomedical implants. Proceedings of the 2015 IEEE Custom Integrated Circuits Conference (CICC), San Jose, CA, USA.10.1109/CICC.2015.7338428 ↗
44. A mm-Sized Implantable Medical Device (IMD) With Ultrasonic Power Transfer and a Hybrid Bi-Directional Data Link10.1109/JSSC.2015.2427336 ↗
45. Zhang, X., Lee, H., and Guo, S. (2011, January 10–12). A power- and area-efficient integrated power management system for inductively-powered biomedical implants. Proceedings of the 2011 IEEE Biomedical Circuits and Systems Conference (BioCAS), San Diego, CA, USA.10.1109/BioCAS.2011.6107765 ↗
46. Self-Powered 30 µW to 10 mW Piezoelectric Energy Harvesting System With 9.09 ms/V Maximum Power Point Tracking Time10.1109/JSSC.2015.2456880 ↗
47. Low-voltage bulk-driven rectifier for biomedical applications10.1016/j.mejo.2013.04.009 ↗
48. A 10.5 cm Ultrasound Link for Deep Implanted Medical Devices10.1109/TBCAS.2013.2295403 ↗
49. Ma, Y., Cui, K., Ye, Z., Sun, Y., and Fan, X.Y. (2020). A 13.56-MHz Active Rectifier With SAR-Assisted Coarse-Fine Adaptive Digital Delay Compensation for Biomedical Implantable Devices. IEEE Solid-State Circuits Lett.10.1109/LSSC.2020.3005764 ↗
50. A VHF Wide-Input Range CMOS Passive Rectifier With Active Bias Tuning10.1109/JSSC.2020.3005814 ↗
51. 40.68 MHz Digital On-Off Delay-Compensated Active Rectifier for WPT of Biomedical Applications