Reliability of Field Experiments, Analytical Methods and Pedestrian’s Perception Scales for the Vibration Serviceability Assessment of an In-Service Glass Walkway
Source abstract
Abstract
The vibration performance of pedestrian structures attracts the attention of several studies, especially with respect to unfavorable operational conditions or possible damage scenarios. Given a pedestrian system, specific vibration comfort levels must be satisfied in addition to basic safety requirements, depending on the class of use, the structural typology and the materials. To this aim, guideline documents of the literature offer simplified single-degree-of-freedom (SDOF) approaches to estimate the maximum expected vibrations and to verify the required comfort limits. Most of these documents, however, are specifically calibrated for specific scenarios/structural typologies. Dedicated methods of design and analysis, in this regard, may be required for structural glass pedestrian systems, due to their intrinsic features (small thickness-to-size ratios, high flexibility, type and number of supports, live-to-dead load ratios, use of materials that are susceptible to mechanical degradation with time/temperature/humidity, etc.). Careful consideration could be then needed not only at the design stage, but also during the service life of a given glass walkway. In this paper, the dynamic performance of an in-service glass walkway is taken into account and explored via field vibration experiments. A set of walking configurations of technical interest is considered, involving 20 volunteers and several movement features. The vibration comfort of the structure is then assessed based on experimental estimates and existing guideline documents. The intrinsic uncertainties and limits of simplified approaches of literature are discussed, with respect to the performance of the examined glass walkway. In conclusion, the test predictions are also used to derive “perception index” data and scales that could support a reliable vibration comfort assessment of in-service pedestrian glass structures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Engineering and Vibration Analysis · Effects of Vibration on Health · Railway Engineering and Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Engineering and Architecture, University of Trieste, 34127 Trieste, Italy
References (61)
Show source-provided references
1. Haldimann, M., Luible, A., and Overend, M. (2008). Structural Use of Glass, IABSE.10.2749/sed010 ↗
2. Dimova, S., Pinto, A., Feldmann, M., and Denton, S. (2014). Guidance for European structural design of glass components—Support to the implementation, harmonization and further development of the Eurocodes. Report EUR 26439–Joint Research Centre-Institute for the Protection and Security of the Citizen, Office of the European Union.
3. CNR-DT 210/2013 (2013). Istruzioni per la Progettazione. L’esecuzione ed il Controllo di Costruzioni con Elementi Strutturali in Vetro, National Research Council (CNR).
4. Laminated glass cantilevered plates under static and impact loading10.1155/2018/7874618 ↗
5. Low velocity impact performance investigation on square hollow glass columns via full-scale experiments and Finite Element analyses10.1016/j.compstruct.2017.09.055 ↗
6. A case study of apparently spontaneous fracture10.1007/s40940-017-0047-4 ↗
7. Corradi, M., and Speranzini, E. (2019). Post-cracking capacity of glass beams reinforced with steel fibers. Materials, 12.10.3390/ma12020231 ↗
8. Vulnerability and protection of glass windows and facades under blast: Experiments, methods and current trends
9. Dotan, H. (2016, January 16–17). Zhangjiajie grand canyon glass bridge. Proceedings of the Challenging Glass 5—Conference on Architectural and Structural Applications of Glass, Gent, Belgium.
10. Belis, J., Louter, C., and Mocibob, D. (2013). Architectural aspect of structural glass roof design. COST Action TU0905 Mid-Term Conference on Structural Glass, CRC Press.10.1201/b14563 ↗
11. Design and analysis of a glass roof structure10.1002/tal.721 ↗
12. Lauriks, L., de Bow, M., and Wouters, I. (2009, January 8–9). Glass in Roofs. Study of the 19th Century Literature on Building Technology. Proceedings of the 1st WTA International PhD Symposium, Leuven, Belgium.
13. Glass entrance Van Gogh Museum Amsterdam10.1007/s40940-016-0022-5 ↗
14. Davis, B., and Avci, O. (2015). Simplified vibration serviceability evaluation of slender monumental stairs. J. Struct. Eng., 141.10.1061/(ASCE)ST.1943-541X.0001256 ↗
15. Weathering action on thermo-viscoelastic properties of polymer interlayers for laminated glass10.1016/j.conbuildmat.2015.08.010 ↗
16. Bedon, C., Fasan, M., and Amadio, C. (2019). Vibration analysis and dynamic characterisation of structural glass elements with different restraints based on Operational Modal Analysis. Buildings, 9.10.3390/buildings9010013 ↗
17. Clough, R.W., and Penzien, J. (1993). Dynamics of Structures, McGraw-Hill.
18. Interaction between walking humans and structures in vertical direction: A literature review
19. ABAQUS (2017). ABAQUS Computer Software V. 6.14, Dassault Systémes.
20. Diagnostic analysis and dynamic identification of a glass suspension footbridge via on-site vibration experiments and FE numerical modelling10.1016/j.compstruct.2019.03.005 ↗
21. EN 1990 (2005). Eurocode 0—Basis of Structural Design—Annex A2: Application for Bridges, CEN.
22. ISO 10137 (2007). Bases for Design of Structures—Serviceability of Buildings and Walkways Against Vibrations, International Organization for Standardization (ISO).
23. SÉTRA (2006). Assessment of vibrational behavior of footbridges under pedestrian loading. SÉTRA Technical Guide, Technical Department for Transport, Roads and Bridges Engineering and Road Safety.
24. Griffis, G.L. (2016). Floor vibration due to human activities. Steel Design Guide Series, American Institute of Steel Construction (AISC). [2nd ed.].
25. Static and free vibration analysis of laminated glass beam on viscoelastic supports10.1016/j.ijsolstr.2007.07.009 ↗
26. Pelayo, F., and Lopez-Aenlle, M. (2017). Natural frequencies and damping ratios of multi-layered laminated glass beams using a dynamic effective thickness. J. Sandw. Struct. Mater., 21.10.1177/1099636217695479 ↗
27. On modal analysis of laminated glass: Usability of simplified methods and enhanced effective thickness10.1016/j.compositesb.2018.05.032 ↗
28. Belis, J., Louter, C., and Mocibob, D. (2013). Evaluation of damping properties of structural glass panes under impact loading. COST Action TU0905 Mid-Term Conference on Structural Glass, CRC Press.10.1201/b14563 ↗
29. Numerical assessment of vibration control systems for multi-hazard design and mitigation of glass curtain walls10.1016/j.jobe.2017.11.004 ↗
30. Feng, Q., Fan, L., Huo, L., and Song, G. (2018). Vibration reduction of an existing glass window through a viscoelastic material-based retrofit. Appl. Sci., 8.10.3390/app8071061 ↗
31. Bachmann, H., and Ammann, W. (1987). Vibrations in Structures Induced by Man and Machines, Structural Engineering Documents, International Association of Bridge and Structural Engineering (IABSE).10.2749/sed003e ↗
32. Review of pedestrian load models for vibration serviceability assessment of floor structures10.3390/vibration2010001 ↗
33. Quantification of changes in modal parameters due to the presence of passive people on a slender structure10.1016/j.jsv.2014.06.003 ↗
34. Vibration testing, analysis and human-structure interaction studies of a slender footbridge10.1061/(ASCE)CF.1943-5509.0001213 ↗
35. Feldmann, M., Heinemeyer, C., Butz, C., Caetano, E., Cunha, A., Galanti, F., Goldack, A., Hechler, O., Hicks, S., and Keil, A. (2009). Design of Floor Structures for Human Induced Vibrations, European Commission Joint Research Centre. EUR 24084 EN.
36. Heinemeyer, C., Butz, C., Keil, A., Schlaich, M., Goldack, A., Trometer, S., Lukic, M., Chabrolin, B., Lemaire, A., and Martin, P.O. (2009). Design of Lightweight Footbridges for Human Induced Vibrations, European Commission Joint Research Centre. EUR 23984 EN.
37. Experimental study on pedestrian’s perception of human-induced vibrations of footbridges10.1142/S021945541850116X ↗
38. Experimentally fitted biodynamic models for pedestrian-structure interaction in walking situations10.1016/j.ymssp.2015.10.029 ↗
39. A simple mass-spring model with roller feet can induce the ground reactions observed in human walking10.1115/1.3005147 ↗
40. Dynamic response of the standing human body exposed to vertical vibration: Influence of posture and vibration magnitude10.1006/jsvi.1997.1376 ↗
41. Verification of equivalent mass-spring-damper models for crowd-structure vibration response prediction10.1139/l11-076 ↗
42. Modeling of crowd load in vertical direction using biodynamic model for pedestrians crossing footbridges10.1139/cjce-2011-0587 ↗
43. Cao, L., Qi, H., and Li, J. (2018). Experimental and numerical studies on the vibration serviceability of fanshaped prestressed concrete floor. Int. J. Distrib. Sens. Netw., 14.10.1177/1550147718795746 ↗
44. Dynamic performance characteristics of an innovative hybrid composite floor plate system under human-induced loads10.1016/j.compstruct.2012.09.015 ↗
45. Vibration testing of timber floor systems
46. Vibration analysis of orthotropic composite floors for human rhythmic activities
47. Bedon, C., Bergamo, E., Izzi, M., and Noè, M.S. (2018). Prototyping and validation of MEMS accelerometers for structural health monitoring—The case study of the Pietratagliata cable-stayed bridge. J. Sens. Actuator Netw., 7.10.3390/jsan7030030 ↗
48. SMIT (2018, December 01). Structural Modal Identification Toolsuite. Available online: http://smit.atlss.lehigh.edu.
49. Chang, M., Leonard, R.L., and Pakzad, S.N. (2019, May 11). SMIT User’s Guide. Release 1.0. Available online: http://smit.atlss.lehigh.edu/wp-content/uploads/2012/07/SMIT-Users-Guide.pdf.
50. Observer kalman filter identification for output-only systems using interactive structural modal identification toolsuite10.1061/(ASCE)BE.1943-5592.0000530 ↗
51. Experimental and analytical vibration serviceability assessment of an in-service footbridge10.1016/j.csndt.2016.11.001 ↗
52. Vibration serviceability of footbridges: Evaluation of the current codes of practice10.1016/j.engstruct.2013.11.006 ↗
53. Dey, P., Walbridge, S., and Narasimhan, S. (2015, January 1–2). Vibration serviceability analysis of aluminum pedestrian bridges subjected to crowd loading. Proceedings of the 6th International Conference on Advances in Experimental Structural Engineering, University of Illinois, Urbana, IL, USA.
54. Smith, A.L., Hicks, S.J., and Devine, P.J. (2009). Design of floors for vibration: A new approach, The Steel Constriction Institute (SCI).
55. Leonard, D. (1966). Human Tolerance Levels for Bridge Vibrations, Road Research Laboratory. TRRL Report No. 34.
56. Gaetan, K. (2018). Vibrational response of structures exposed to human-induced loads. 36th IMAC—A Conference and Exposition on Structural Dynamics 2018, Springer.
57. De Silva, C.W. (2005). Vibration and Shock Handbook, CRC Press.10.1201/9781420039894 ↗
58. Human perception thresholds of horizontal motion10.1061/JSDEAG.0003297 ↗
59. A review of vibration serviceability criteria for floor structures10.1016/j.compstruc.2005.03.023 ↗
60. Pavelchak, M.A. (2017, January 12–17). Evaluation of vibration problems in existing office buildings. Proceedings of the EVACES2017—Experimental Vibration Analysis for Civil Engineering Structures, San Diego, CA, USA.10.1007/978-3-319-67443-8_65 ↗
61. Cerpinska, M., and Irbe, M. (2017). Specifics of natural frequency measurements for floor vibration. Eng. Rural Dev., 162–166.10.22616/ERDev2017.16.N031 ↗