A Short Review on the Effect of Surfactants on the Mechanico-Thermal Properties of Polymer Nanocomposites
Source abstract
Abstract
The recent growth of nanotechnology consciousness has enhanced the attention of researchers on the utilization of polymer nanocomposites. Nanocomposite have widely been made by using synthetic, natural, biosynthetic, and synthetic biodegradable polymers with nanofillers. Nanofillers are normally modified with surfactants for increasing the mechanico-thermal properties of the nanocomposites. In this short review, two types of polymer nanocomposites modified by surfactants are classified, specifically surfactant-modified inorganic nanofiller/polymer nanocomposites and surfactant-modified organic nanofiller/polymer nanocomposites. Moreover, three types of surfactants, specifically non-ionic, anionic, and cationic surfactants that are frequently used to modify the nanofillers of polymer nanocomposites are also described. The effect of surfactants on mechanico-thermal properties of the nanocomposites is shortly reviewed. This review will capture the interest of polymer composite researchers and encourage the further enhancement of new theories in this research field.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Nanotechnology research and applications · Carbon Nanotubes in Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Laboratory of Biocomposite Technology, Institute of Tropical Forestry and Forest Products, Universiti Putra Malaysia, UPM Serdang, Selangor 43400, Malaysia
Department of Chemistry, Faculty of Science, Universiti Putra Malaysia, UPM Serdang, Selangor 43400, Malaysia
Centre of Foundation Studies for Agricultural Science, Universiti Putra Malaysia, UPM Serdang, Selangor 43400, Malaysia
Funding
Universiti Putra Malaysia
References (46)
Show source-provided references
1. Modification of montmorillonite by novel geminal benzimidazolium surfactant and its use for the preparation of polymer organoclay nanocomposites10.1016/j.compositesb.2013.03.009 ↗
2. Mechanical and thermal properties of polypropylene/montmorillonite nanocomposites using stearic acid as both an interface and a clay surface modifier10.1002/pc.22627 ↗
3. Surfactant-induced thermomechanical and morphological changes in TiO2-polystyrene nanocomposites10.1016/j.jcis.2013.04.053 ↗
4. High-impact polystyrene/halloysite nanocomposites prepared by emulsion polymerization using sodium dodecyl sulfate as surfactant10.1016/j.jcis.2011.03.009 ↗
5. Enhanced electromagnetic interference shielding and mechanical properties of foamed epoxy nanocomposites containing carbon nanofiber treated with silicone surfactant10.1002/app.46833 ↗
6. Fracture behaviors of TRGO-filled epoxy nanocomposites with different dispersion/interface levels10.1002/mame.201400437 ↗
7. Use of surfactants in cellulose nanowhisker/epoxy nanocomposites: Effect on filler dispersion and system properties10.1007/s10570-015-0728-6 ↗
8. Effect of nanocellulose fibers and acetylated nanocellulose fibers on properties of poly (ethylene-co-vinyl acetate) foams10.1002/app.44760 ↗
9. Effect of matrix viscosity on the extent of exfoliation in EVA/organoclay nanocomposites10.1002/pat.1444 ↗
10. Effect of surfactant treatment on thermal stability and mechanical properties of CNT/polybenzoxazine nanocomposites10.1016/j.compscitech.2012.08.020 ↗
11. Zhang, G., Wang, F., Dai, J., and Huang, Z. (2016). Effect of functionalization of graphene nanoplatelets on the mechanical and thermal properties of silicone rubber composites. Materials, 9.10.3390/ma9020092 ↗
12. Preparation, morphology, and antibacterial properties of polyacrylonitrile/montmorillonite/silver nanocomposites10.1016/j.matchemphys.2012.07.034 ↗
13. Preparation and property of UV-curable polyurethane acrylate film filled with cationic surfactant treated graphene10.1016/j.apsusc.2016.04.104 ↗
14. Influence of morphology and dispersion stability of CNC modified with ethylene oxide derivatives on mechanical properties of PLA-based nanocomposites
15. PLA nanocomposites reinforced with cellulose nanocrystals from Posidonia oceanica and ZnO nanoparticles for packaging application10.7569/JRM.2016.634135 ↗
16. Soil biodegradation of PLA/CNW nanocomposites modified with ethylene oxide derivatives10.1590/1980-5373-mr-2016-0960 ↗
17. Microstructure and nonisothermal cold crystallization of PLA composites based on silver nanoparticles and nanocrystalline cellulose10.1016/j.polymdegradstab.2012.03.027 ↗
18. Multifunctional bionanocomposite films of poly (lactic acid), cellulose nanocrystals and silver nanoparticles10.1016/j.carbpol.2011.09.066 ↗
19. Composite films of ecofriendly lignocellulosic nanostructures in biodegradable polymeric matrix10.1007/s42452-019-0765-0 ↗
20. Organomodification of montmorillonite and its effects on the properties of poly (butylene succinate) nanocomposites10.1002/pen.23460 ↗
21. Effect of surfactant and sodium alginate modification of graphene on the mechanical and thermal properties of polyvinyl alcohol (PVA) nanocomposites
22. Anomalous impact strength for layered double hydroxide-palmitate/poly (ε-caprolactone) nanocomposites10.1002/app.41109 ↗
23. The use of surfactants for dispersing carbon nanotubes and graphene to make conductive nanocomposites10.1016/j.cocis.2012.03.001 ↗
24. Effects of surfactant treatment on mechanical and electrical properties of CNT/epoxy nanocomposites10.1016/j.compositesa.2008.09.009 ↗
25. Mechanical behavior of carbon nanofibre-reinforced epoxy composites10.1002/app.30861 ↗
26. Development of carbon nanofibre incorporated three phase carbon/epoxy composites with enhanced mechanical, electrical and thermal properties10.1016/j.compositesa.2010.12.018 ↗
27. Improved dispersion and interface in the graphene/epoxy composites via a facile surfactant-assisted process10.1016/j.compscitech.2013.04.009 ↗
28. Effects of modified cellulose nanocrystals on the barrier and migration properties of PLA nano-biocomposites10.1016/j.carbpol.2012.06.025 ↗
29. Enhanced dispersion and interface compatibilization of crystalline nanocellulose in polylactide by surfactant adsorption10.1007/s10570-017-1479-3 ↗
30. Dispersion of cellulose crystallites by nonionic surfactants in a hydrophobic polymer matrix10.1002/pen.21417 ↗
31. Physical and morphological properties of UV-cured cellulose nanocrystal (CNC) based nanocomposite coatings for wood furniture10.1016/j.porgcoat.2015.12.009 ↗
32. Application of calcium montmorillonite on flame resistance, thermal stability and interfacial adhesion in polystyrene nanocomposites10.1515/epoly-2019-0012 ↗
33. Solvent-free esterification process for the synthesis of glucose bolaform surfactants
34. Compatibilization of HDPE/agar biocomposites with eutectic-based ionic liquid containing surfactant10.1177/0731684413516688 ↗
35. Influence of surface treatment on tensile properties of low-density polyethylene/cellulose woven biocomposites: A preliminary study10.3390/polym6092345 ↗
36. Exploration on compatibilizing effect of nonionic, anionic, and cationic surfactants on mechanical, morphological, and chemical properties of high-density polyethylene/low-density polyethylene/cellulose biocomposites10.1177/0892705715614064 ↗
37. Shamsuri, A.A., and Md. Jamil, S.N.A. (2020). Compatibilization effect of ionic liquid-based surfactants on physicochemical properties of PBS/rice starch blends: An initial study. Materials, 13.10.3390/ma13081885 ↗
38. Inorganic nanomaterials for soft tissue repair and regeneration10.1146/annurev-bioeng-071516-044457 ↗
39. Preparation and thermal characterisation of poly (lactic acid) nanocomposites prepared from organoclays based on an amphoteric surfactant10.1016/j.polymdegradstab.2009.01.012 ↗
40. Preparation and characterization of exfoliated poly (ethyleneterephthalate)/montmorillonite nanocomposites using modified MMTs with variable content of antimony acetate10.1002/cjoc.201190237 ↗
41. Preparation and characterization of organoclays based on an amphoteric surfactant10.1016/j.jcis.2008.01.045 ↗
42. Dispersion behaviour, thermal and electrical conductivities of carbon nanotube-polystyrene nanocomposites10.1049/mnl:20070073 ↗
43. Effect of surfactants and manufacturing methods on the electrical and thermal conductivity of carbon nanotube/silicone composites10.3390/molecules171113157 ↗
44. Highly enhanced thermal conductivity of thermoplastic nanocomposites with a low mass fraction of MWCNTs by a facilitated latex approach10.1016/j.compositesa.2016.09.002 ↗
45. Effect of surfactant and electron treatment on the electrical and thermal conductivity as well as thermal and mechanical properties of ethylene vinyl acetate/expanded graphite composites10.1002/app.42396 ↗
46. Enhancement of thermal conductivity of polymethyl methacrylate-coated graphene/epoxy composites using admicellar polymerization with different ionic surfactants10.1016/j.compositesa.2018.10.035 ↗