journal article·2020-12-10Open access

Design and Experimentation of an Aerial Seeding System for Rapeseed Based on an Air-Assisted Centralized Metering Device and a Multi-Rotor Crop Protection UAV

Xiaomao Huang, Shun Zhang, Chengming Luo, Wencheng Li, Yitao Liao

Applied Sciences· Volume 10· Issue 24

Abstract

To improve the overall mechanization level of rapeseed production in China, especially in some hilly regions where ground machinery cannot enter the fields or can only enter with very low economic benefits, a special aerial seeding system for rapeseed based on a miniature air-assisted centralized metering device was designed and tested in this study. Unlike existing commercial aerial seeding systems, the proposed seed meter was a miniaturized version derived from the traditional air-feeding seed meter on ground planters. The new version contained a redesigned seed feeding component to overcome problems of serious air backflow to the seed box and difficult seed feeding after miniaturization. Three groups of experiments were designed and conducted to optimize the parameters of the seed meter and test its performance. Results from the orthogonal experiment showed that the seed feeding component performed best when the seed layer thickness was 45 mm, the rotational speed of the gear disc was 45 r/min, and the airflow pressure was 2450 Pa. Results from the static workbench test showed that the designed seeding system had a maximum average total sowing efficiency of 537.17 g/min, with the maximum values of the stability variation coefficient of total seeding rate (seven ports) and the consistency variation coefficient between each port was 2.37% and 4.89%, respectively. Field tests further proved that the designed aerial seeding system could work stably, uniformly, and efficiently, so that the agronomic requirements of rape crop planting could be well met.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Soil Mechanics and Vehicle Dynamics · Crop Yield and Soil Fertility · Agricultural Engineering and Mechanization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Engineering, Huazhong Agricultural University, Wuhan 430070, China

Key Laboratory of Agricultural Equipment in Mid-lower Yangtze River, Ministry of Agriculture and Rural Affairs, Wuhan 430070, China

Funding

National Natural Science Foundation of China · Central University Basic Research Business Fund Special Project · Hubei Province Natural Science Foundation Project

References (22)

Show source-provided references
1. Design and test of an inside-filling pneumatic precision centralized seed-metering device for rapeseed
2. The application of small unmanned aerial systems for precision agriculture: A review10.1007/s11119-012-9274-5 ↗
3. A Survey of small-scale unmanned aerial vehicles: Recent advances and future development trends10.1142/S2301385014300017 ↗
4. Aerial seeding of forests in Russia: A selected literature analysis10.1088/1755-1315/226/1/012051 ↗
5. Pasture, sheep and timber production from agro-forestry systems with subterranean clover sown under 15-year-old Pinusradiata by a method simulating aerial seeding10.1071/EA9830123 ↗
6. Method for UAV spraying pattern measurement with PLS model based spectrum analysis
7. Spray drift characteristics test of unmanned aerial vehicle spray unit under wind tunnel conditions
8. The application of unmanned aircraft systems to plant protection in China10.1007/s11119-017-9516-7 ↗
9. (2020, May 20). DJ Innovation Co. Ltd.. Available online: https://ag.dji.com/zh-tw?site=brandsite&from=nav.
10. (2020, May 20). Guangzhou XAG Co. Ltd.. Available online: https://www.xa.com/en/jetseed.
11. Design and test of operation parameters for rice air broadcasting by unmanned aerial vehicle
12. Thoughts on application of agricultural material spreading technology in unmanned helicopter
13. Design and experiment of a rape aerial seeding in lines device
14. Simulation of seed motion in seed feeding device with DEM-CFD coupling approach for rapeseed and wheat10.1016/j.compag.2016.11.006 ↗
15. Ma, N., Yuan, J., Li, M., Li, J., Zhang, L., Liu, L., Naeem, M., and Zhang, C. (2014). Ideotype population exploration: Growth, photosynthesis, and yield components at different planting densities in winter oilseed rape (Brassica napus L.). PLoS ONE, 9.10.1371/journal.pone.0114232 ↗
16. Design and experiment of seed hill feeding device in pneumatic centralized metering device for hybrid rice
17. Simulation and experimental research on automatic supplying-seeds device of pneumatic and vibratory precision seeder
18. Numerical simulation and experiment on performance of supplying seeds mechanism of directional precision seeding device for japonica rice
19. Chen, L. (2013). Design and Experimental Research on Cleaning Device of Rape Combine Harvester. [Master’s Thesis, Huazhong Agricultural University]. (In Chinese).
20. Lei, X. (2017). Design and Working Mechanism of Air-Assisted Centralized Metering Device for Rapeseed and Wheat. [Ph. D. Thesis, Huazhong Agricultural University]. (In Chinese).
21. Design and experiment of an air-suction potato seed metering device
22. Roy, R.K. (2001). Design of Experiments Using the Taguchi Approach: 16 Steps to Product and Process Improvement, John Wiley & Sons, Inc.