journal article·2021-08-08Open access

Optimization of Composition and Technological Factors for the Lightweight Fiber-Reinforced Concrete Production on a Combined Aggregate with an Increased Coefficient of Structural Quality

Levon R. Mailyan, Alexey N. Beskopylny, Besarion Meskhi, Sergey A. Stel’makh, Evgenii M. Shcherban, Oxana Ananova

Applied Sciences· Volume 11· Issue 16

Abstract

In recent years, developing lightweight concrete with both the necessary and sufficient strength characteristics is essential in the construction industry. This article studies the influence of the volumetric composition of lightweight fiber-reinforced concrete (LFRC) and the method of its distribution during the preparation of the fiber–concrete mixture on the strength and deformation characteristics of LFRC on a combined aggregate. The optimal grain size of the porous filler was calculated by the mathematical planning method of the experiment. Regression models of the strength and deformation characteristics on the volumetric content of fiber and its distribution method were obtained. The most effective combination of these factors has been determined. The model shows that the increase in compressive strength was 12%, the value of the prismatic strength increased by 25%, the bending tensile strength increased by 34%, and the axial tensile strength increased by 11%. The ultimate strains during axial compression decreased by 10%, axial tension decreased by 12%, and the elasticity modulus increased by 11% compared to the test results of the control composition samples without fiber and pumice. The coefficient of constructive quality (CCQ) of the LFRC on a combined aggregate compared to concrete with the control composition without fiber and pumice showed an increase of more than 32%. It was also found that fiber reinforcement with basalt fibers with a combination of heavy and porous aggregates achieves a synergistic effect together.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Roads, Don State Technical University, 344000 Rostov-on-Don, Russia

Department of Transport Systems, Faculty of Roads and Transport Systems, Don State Technical University, 344000 Rostov-on-Don, Russia

Department of Life Safety and Environmental Protection, Faculty of Life Safety and Environmental Engineering, Don State Technical University, 344000 Rostov-on-Don, Russia

Department of Engineering Geology, Bases, and Foundations, Don State Technical University, 344000 Rostov-on-Don, Russia

Department of Marketing and Engineering Economics, Faculty of Innovative Business and Management, Don State Technical University, 344000 Rostov-on-Don, Russia

References (35)

Show source-provided references
1. Fine-grained concrete with various types of fibers
2. Evaluation of the basalt fiber reinforced pumice lightweight concrete
3. Anysz, H., and Narloch, P. (2019). Designing the composition of cement stabilized rammed earth using artificial neural networks. Materials, 12.10.3390/ma12091396 ↗
4. Narloch, P., Hassanat, A., Tarawneh, A.S., Anysz, H., Kotowski, J., and Almohammadi, K. (2019). Predicting compressive strength of cement-stabilized rammed earth based on SEM images using computer vision and deep learning. Appl. Sci., 9.10.3390/app9235131 ↗
5. Basalt fiber reinforced expanded clay concrete for building structures
6. Performance of the novel C-purlin tubular beams filled with recycled-lightweight concrete strengthened with CFRP sheet10.1016/j.jobe.2021.102532 ↗
7. Computational assessment of thermal performance of 3D printed concrete wall structures with cavities10.1016/j.jobe.2021.102431 ↗
8. Analysis-oriented stress–strain model of CRFP-confined circular concrete columns with applied preload10.1617/s11527-018-1169-0 ↗
9. Model of heterogeneous reinforced fiber foam concrete in bending10.1088/1757-899X/365/3/032023 ↗
10. Design parameters of steel fiber concrete beams
11. Kang, I.-K., and Kim, S.-H. (2021). Compressive strength testing of hybrid concrete-filled fiber-reinforced plastic tubes confined by filament winding. Appl. Sci., 11.10.3390/app11072900 ↗
12. The performance of ultra-lightweight foamed concrete incorporating nanosilica10.1007/s43452-021-00234-2 ↗
13. Performance evaluation of pre-foamed ultra-lightweight composites incorporating various proportions of slag
14. Beskopylny, A., Lyapin, A., Anysz, H., Meskhi, B., Veremeenko, A., and Mozgovoy, A. (2020). Artificial neural networks in classification of steel grades based on non-destructive tests. Materials, 13.10.3390/ma13112445 ↗
15. A comparative study of concrete strength prediction using artificial neural network, multigene programming and model tree
16. Concrete strength prediction using artificial neural network and genetic programming10.20528/cjcrl.2018.03.002 ↗
17. Han, I.-J., Yuan, T.-F., Lee, J.-Y., Yoon, Y.-S., and Kim, J.-H. (2019). Learned prediction of compressive strength of GGBFS concrete using hybrid artificial neural network models. Materials, 12.10.3390/ma12223708 ↗
18. Modeling the adhesion of reinforcement in concrete based on an artificial neural network
19. Predicting fiber-reinforced polymer-concrete bond strength using artificial neural networks: A comparative analysis study10.1002/suco.201900298 ↗
20. Bae, B.-I., Lee, M.-S., Choi, C.-S., Jung, H.-S., and Choi, H.-K. (2021). Evaluation of the ultimate strength of the ultra-high-performance fiber-reinforced concrete beams. Appl. Sci., 11.10.3390/app11072951 ↗
21. Durability performance of a novel ultra-high-performance PET green concrete (UHPPGC)10.1016/j.conbuildmat.2019.03.088 ↗
22. Limit states for sustainable reinforced concrete structures10.1016/j.cemconres.2019.04.013 ↗
23. Design features of three-layer slab reinforced concrete structures10.4028/www.scientific.net/MSF.931.264 ↗
24. Initial crack effect on the strength of oblique cross sections of reinforced concrete beams strengthened with carbon fiber10.1051/e3sconf/201911001053 ↗
25. The cut span effect on the beams inclined sections strength reinforced with external composite reinforcement10.4028/www.scientific.net/MSF.974.633 ↗
26. Effect of disperse reinforcement on the structural quality factor of vibrated and centrifuged concretes on the сombined aggregate10.4028/www.scientific.net/MSF.974.283 ↗
27. Efficiency comparison of fiber reinforcement in vibrated аnd centrifuged concretes at different types of the applied heavy aggregate10.4028/www.scientific.net/MSF.974.288 ↗
28. Mailyan, L.R., Stel’makh, S.A., Shcherban’, E.M., Khalyushev, A.K., Smolyanichenko, A.S., Sysoev, A.K., Parinov, I.A., and Cherpakov, A.V. (2021). Investigation of integral and differential characteristics of variatropic structure heavy concretes by ultrasonic methods. Appl. Sci., 11.10.3390/app11083591 ↗
29. Stel’makh, S.A., Shcherban’, E.M., Shuiskii, A.I., Prokopov, A.Y., Madatyan, S.M., Parinov, I.A., and Cherpakov, A.V. (2020). Effects of the geometric parameters of mixer on the mixing process of foam concrete mixture and its energy efficiency. Appl. Sci., 10.10.3390/app10228055 ↗
30. GOST 10180 Concretes (2021, August 07). Methods for Strength Determination Using Reference Specimens. Available online: http://docs.cntd.ru/document/1200100908.
31. GOST 24452 Concretes (2021, August 07). Methods of Prismatic, Compressive Strength, Modulus of Elasticity and Poisson’s Ratio Determination. Available online: https://docs.cntd.ru/document/9056198.
32. GOST 27006 Concretes (2021, August 07). Rules for Mix Proposing. Available online: https://docs.cntd.ru/document/1200165762.
33. Hameed, M.A.S., Maula, B.H., and Bahnam, Q.M. (2019). An empirical relationship between compressive strength and ultrasonic pulse velocity for concrete. Int. Rev. Civ. Eng., 10.10.15866/irece.v10i6.17061 ↗
34. Effects of fiber shape and distance on the pullout behavior of steel fibers embedded in ultra-high-performance concrete10.1016/j.cemconcomp.2019.05.006 ↗
35. Mailyan, L.R., Beskopylny, A.N., Meskhi, B., Shilov, A.V., Stel’makh, S.A., Shcherban’, E.M., Smolyanichenko, A.S., and El’shaeva, D. (2021). Improving the structural characteristics of heavy concrete by combined disperse reinforcement. Appl. Sci., 11.10.3390/app11136031 ↗