A Dual-Mass Resonant MEMS Gyroscope Design with Electrostatic Tuning for Frequency Mismatch Compensation
Source abstract
Abstract
The micro-electro-mechanical systems (MEMS)-based sensor technologies are considered to be the enabling factor for the future development of smart sensing applications, mainly due to their small size, low power consumption and relatively low cost. This paper presents a new structurally and thermally stable design of a resonant mode-matched electrostatic z-axis MEMS gyroscope considering the foundry constraints of relatively low cost and commercially available silicon-on-insulator multi-user MEMS processes (SOIMUMPs) microfabrication process. The novelty of the proposed MEMS gyroscope design lies in the implementation of two separate masses for the drive and sense axis using a unique mechanical spring configuration that allows minimizing the cross-axis coupling between the drive and sense modes. For frequency mismatch compensation between the drive and sense modes due to foundry process uncertainties and gyroscope operating temperature variations, a comb-drive-based electrostatic tuning is implemented in the proposed design. The performance of the MEMS gyroscope design is verified through a detailed coupled-field electric-structural-thermal finite element method (FEM)-based analysis.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced MEMS and NEMS Technologies · Acoustic Wave Resonator Technologies · Mechanical and Optical Resonators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Corso duca degli Abruzzi 24, 10129 Torino, Italy
Department of Mechatronics Engineering, National University of Sciences and Technology, Islamabad 44000, Pakistan
National Centre of Robotics and Automation (NCRA), Islamabad 44000, Pakistan
References (27)
Show source-provided references
1. Passaro, V.M.N., Cuccovillo, A., Vaiani, L., De Carlo, M., and Campanella, C.E. (2017). Gyroscope Technology and Applications: A Review in the Industrial Perspective. Sensors, 17.10.3390/s17102284 ↗
2. A cosine-fitting self-alignment method of MEMS-based inertial navigation system consisting of a skew FOG10.1109/JSEN.2020.2996230 ↗
3. A low-cost platform based on a robotic arm for parameters estimation of Inertial Measurement Units10.1016/j.measurement.2017.07.002 ↗
4. Design of a disk resonator gyroscope with high mechanical sensitivity by optimizing the ring thickness distribution10.1109/JMEMS.2016.2558197 ↗
5. Origins and mechanisms of bias instability noise in a three-axis mode-matched MEMS gyroscope10.1109/JMEMS.2019.2921607 ↗
6. A Sub-0.2°/hr Bias Drift Micromechanical Silicon Gyroscope with Automatic CMOS Mode-Matching10.1109/JSSC.2009.2016996 ↗
7. Performance characterization of a new temperature-robust gain-bandwidth improved MEMS gyroscope operated in air10.1016/j.sna.2008.11.003 ↗
8. Ultraviolet-LIGA-based fabrication and characterization of a nonresonant drive-mode vibratory gyro/accelerometer
9. Saqib, M., Mubasher Saleem, M., Mazhar, N., Awan, S.U., and Shahbaz Khan, U. (2018). Design and analysis of a high-gain and robust multi-DOF electro-thermally actuated MEMS gyroscope. Micromachines, 9.10.3390/mi9110577 ↗
10. Ding, X., Jia, J., Gao, Y., and Li, H. (2017). Mechanical and electrical noise in sense channel of MEMS vibratory gyroscopes. Sensors, 17.10.3390/s17102306 ↗
11. A 3-axis gyroscope for electronic stability control with continuous self-test
12. Jia, J., Ding, X., Gao, Y., and Li, H. (2018). Automatic Frequency tuning technology for dual-mass MEMS gyroscope based on a quadrature modulation signal. Micromachines, 9.10.3390/mi9100511 ↗
13. Frequency tuning of work modes in z-axis dual-mass silicon microgyroscope10.1155/2014/891735 ↗
14. A novel dynamic pull-in MEMS gyroscope10.1016/j.proeng.2011.12.014 ↗
15. A high-performance silicon-on-insulator MEMS gyroscope operating at atmospheric pressure10.1016/j.sna.2006.06.043 ↗
16. MEMS gyroscope with concentrated springs suspensions demonstrating single digit frequency split and temperature robustness10.1109/JMEMS.2018.2881209 ↗
17. Size optimization of MEMS gyroscopes using substructuring10.1016/j.euromechsol.2020.104045 ↗
18. Iqbal, F., Din, H., and Lee, B. (2019). Single Drive Multi-Axis Gyroscope with High Dynamic Range, High Linearity and Wide Bandwidth. Micromachines, 10.10.3390/mi10060410 ↗
19. Cowen, A., Hames, G., Monk, D., Wilcenski, S., and Hardy, B. (2020, November 30). SOIMUMPs Design Handbook (Revision 8.0.). Available online: http://www.memscap.com.
20. Numerical and experimental comparison of MEMS suspended plates dynamic behaviour under squeeze film damping effect10.1007/s10470-008-9165-x ↗
21. Compact damping models for laterally moving microsctructures with gas-rarefaction effects10.1109/84.925777 ↗
22. Modelling and validation of air damping in perforated gold and silicon MEMS plates10.1088/0960-1317/20/1/015010 ↗
23. Squeezed film damping measurements on a parallel-plate MEMS in the free molecule regime10.1088/0960-1317/19/7/074021 ↗
24. Modeling and experimental verification of thermally induced residual stress in RF-MEMS10.1088/0960-1317/25/5/055007 ↗
25. Experimental-Numerical Comparison of the Cantilever MEMS Frequency Shift in presence of a Residual Stress Gradient10.3390/s8020767 ↗
26. Effect of residual stress on the mechanical behavior of microswitches at Pull-In10.1111/j.1475-1305.2009.00651.x ↗
27. Bukhari, S.A.R., Saleem, M.M., Khan, U.S., Hamza, A., Iqbal, J., and Shakoor, R.I. (2020). Microfabrication Process-Driven Design, FEM Analysis and System Modeling of 3-DoF Drive Mode and 2-DoF Sense Mode Thermally Stable Non-Resonant MEMS Gyroscope. Micromachines, 11.10.3390/mi11090862 ↗